Resume - Detail oriented with the ability to multi-task. Knowledge in Windows Application...

Misco Jobs

Resume #86954

CONTACT INFORMATION:
View contact information...

OBJECTIVE: To pursue challenging position with a progressive company who promotes challenging and creative atmosphere, offers wealth of opportunity to do best work and work environment that encourage the best.

PROFFESSIONAL EXPERIENCE

January 2008 To May 2009
Civil Engineer/QC/QA Engineer
SK & SAMWHAN JOINT VENTURE
Projects: BL1 and BL2 Buildings
YEMEN LNG PROJECT LNG PLANT, Balhaf, Yemen

- Responsible for making decisions requiring technical discretion, sound judgment, familiarity with a variety of codes, ordinances and construction methods or problems.
- Perform field plan review and make construction corrections when deficiencies are discovered to be forwarded to the engineering shop drawing engineers for the conversion to technical drawings.
- Prepares construction details and red markings to drawing plans for the proper alteration of construction plans, preparation of shop drawings and as built drawings.
- Provide information to construction and contractors regarding codes and other regulatory requirements and specifications.
- Prepares weekly construction work reports, progress site photos, masters drawing/document status report and as built status reports needed for the weekly and monthly meeting.
- Gathers information, coordination to managers and engineers for the rectification of plans, preparation of material quantity for procurement, construction technical queries and deviation request.
- Prepares letter statement to the client and contractor regarding to actual site problems encountered which requires special attentions.
- Develop and coordinate construction documents of area of the project.
- Assigned in the preparation of hand over documents from subcontractors to contractors. Variation work orders, modification on plans and documents which required in the work variation.
- Performs inspection in accordance with approved plans and all discipline
- Performs the inspection as per QC procedures and Inspection and Test Plan
- Inspect the buildings to conform to standard details, specifications and approved plans.
- Monitors QC documents for the compliance with the Quality Control Plan and assures compliance with approved submittals.
- Perform pre concrete inspection and ensures that formworks, rebars and the concrete placing are in accordance with the approved drawings and international standard.
- Inspects cube test & slump test on concrete and the various third party test on concrete.
- Inspection on steel structure ensures the proper details, methods and specification used.
- Perform pre-commissioning and punch listing report.

March 2007 To October 2007
Junior Structural Engineer
Design Science Inc. / Renardet S.A. Consulting Engineers
6/F Mobile Entertainment Bldg., Rada St., Makati City.Phil.
Projects: Bridge and Highways at South Luzon Express Way Phil.

- Production of general arrangement drawings, preparation of structural layouts, spot details, sections, topographic plan and scheme drawings
- Make accurate revisions to plan based on mark ups
- Responsible for taking engineering mark ups and converting them to technical drawings.
- Prepare quantity take off for rebar and concretes structure
- Acting as Senior Structural Engineer assistant in gathering information on designs based on site inspection
- Develop and coordinate construction documents of area project assigned and work closely to consultants and one responsible for full coordination to construction documents.
- Process and review submittals and shop drawings for the portion of the project assigned.

January 2006 To January 2007

Civil Engineer/Quantity Surveyor
SuperAsia Construction Corporation
3/F Pioneer House, 108 Paseo De Roxas, Makati City.Phil.
Project: Batching Plant, Glass Conveyor and Utility Buildings.
San Miguel Yamamura Project, Imus, Cavite.Phil.

- Directly supervises operation to skilled workers for immediate works as require on site.
- Responsibilities include full authority to order site work stoppage as deem necessary. Offers rectification methodology for defective works to ensure satisfaction of client/consultant.
- Prepares rectification work reports.
- Provide plan review and red markings to construction plans to be given to Cadd operators for technical drawing preparation and alteration.
- Prepares construction drawing plans and alteration of plan details for construction using AutoCadd Program.
- Prepares weekly and monthly status report for each ongoing project.
- Observes site safety practices.
- Material quantity take off on structural rebars, blocks and concrete.
- Prepares Bid documents
- Attend Pre-bid meetings together with the Senior Quantity Surveyor.
- Other job as maybe required and directed by the superiors relative to the project.

SEMINARS
- Philippine Institute of Civil Engineer, December 17, 2005
- Seminar of Philippine Bidding Docs. ( R.A. 194),Feb. 19, 2005
- Seminar on Continuing Professional Dev't. in Civil En'g. Aug. 30, 2006
- Seminar on Preparing Feasibility Study, November 18, 2006
- Seminar on Application of Softwares in Civil Eng'g., Aug.
28,2004

EDUCATION

Passed Licensure Board Exam for Civil Engineer-November 2005
PRC License No. 0104338

ORGANIZATION
Member
-Philippine Institute of Civil Engineer
OTHER SKILLS

* Detail oriented with the ability to multi-task.
* Knowledge in Windows Application such as MS Office, Staad Pro and AutoCAD. Good communication skills

REFERENCES ARE AVAILABLE ON REQUEST:

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6351 to 6400 of 15320)

Go to Search Parameters...

Brief Description

I have 21 years in Aust Army as Maint Planner/Supervisor with Diploma Engineering (Maint). Experienced trainer in Mincom Logistics computer systems. Willing to relocate nationally or internationally for the right position.

Over twelve years experience in Offshore and Onshore Oil & Gas and Marine Structure Development in National & International government projects. Project engineering management, Engineering, Design, Construction and Project cost estimation.

WORK EXPERIENCE I have 14 years of experience in plant F.C.C ( Fluid Catalic Craking ).Refinery El Palito in Venezuela ( PDVSA ) and experience in Pre commissioning

Over 25 years of exploration drilling and mining experience. Responsible for the coordination of drilling projects in both domestic and international environments.

I was employed by ARCO Indonesia Oil & Gas since April 1980 thru March 1999. My last position was Elect/Instr Supervisor of NGL gas plant refinery located at NorthWest Java sea, for offshore facilities. My current employer is BP-Indonesia, position job as Maintenance Planner.

26 years Mechnical Design Engineering 16 years CAD experience including intensive 3D modeling 14 years product design experience. 12 years manufacturing tooling and facilities experience.

23 years experience in the Electrical Distribution/Electrical Contractor Industry. Wish to acquire a part time or full time position in an office or job site environment.

Job objective: General Supervisor, Field Supervisor, Project Manager or Assistant Project Manager. Interested in overseas opportunities.

Objective: Seeking a career position with a progressive organization where my skills , training and extensive knowledge and experience can be fully utilize, while offering the opportunity for continued career growth.

Highly experienced purchasing and material management professional. Specialized experience in remote, severe climatic locations. Extensive experience in cross cultural work situations.

Curriculum Vitae „h Over 25 years of oilfield experience in Canada „h Mechanic on a seismic crew until tools were stolen „h Roughneck to driller, 11 years as a driller on a drilling rig „h Owner/operator of a vacuum truck business „h Mechanically inclined

BS EE from USA. I have over 14 years of experience in maintenance and projects while working with reputable organization like Exxon, Mobil, Occidental and BP Pakistan in fertilizer, petrochemical and oil/gas E&P industries.

OVER THIRTY YEARS EXPERIENCE AS A FULLY CODED WELDER ALONG WITH FOREMAN, SUPERVISER AND WELDING ENGINEER/CHIEF WELDING ENGINEER POSITONS ALSO UNDERTAKEN ALONG WITH NORMAL WELDER POSITION.

Seeking employment where my years of experience in surface & underground mining & construction, as well as my strong sales, contracting, consulting, and management skills can best be used

Chemical engineer w/ experience in developing various contracts in oil, gas, water, waste treatment & soil road maintenance. Expert w/ performance based contract. Possesses good organizational, team & interpersonal skills. Adept at working & communicating across disciplines & management levels.

Looking for a new challenge at the end of 2003 my present contract end then

Operate, commission and monitor equipment in assigned areas, maintaining parameters with the guide lines of the operating manuals and procedures of 80,000BPD three phase separation multi train crude separation units, 110 MMSCFDgas compression& treatment plants

Strategic Planning Business Development Project and Business Valuation

I’m an international Petroleum Engineer, currently working in Turkish Petroleum Int.Co.Ltd. as a Completion/Workover Supervisor back to back Ankara/TR to Aktjubinsk/KZ, experienced about 20 years on land and offshore, in offices in many companies and projects.

Nobody has climbed up through the steps of success with his hands in his pockets.

Seeking challenging assignments in the field of Process Engineering Design, Simulation and Commissioning with leading organisations of repute in the Petrochemical Industry that offers me opportunities to utilize my engineering skills & experiences for advancement in my career endeavours

I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating and MSc. in design of gas turbines. I have >20years of experience with Engineering and Operating Companies in O&G and Petrochemical fields as Senior Mechanical Engineer in Egypt Enppi and in Qatar QP Offshore and QVC

C/C++/ VB / SCADA / Electronic / Embedded / Automation / Systems Engineering

I completed my degree in Electrical Engineering and had taken and passed the highest National Examination in The Philippines, Professional Electrical Engineers Examinations in 1986. I have a good experience in Oil and Gas, Controls, Fire and Gas Systems, Design, Detailed Autocad Drafting(Isometric),

Instrument Engineer is seeking a challenging Position for growth and career opportunity in Oil & Gas Industry. More than 13 years of experience in Preventive and break down maintenance for power plant & gas plant instrumentations with GE Frame 6 gas turbines, DCS and Mark V control systems.

Associate Degree in Mechanical Engineering Draughting, 10 years Experience in various Mechanical and Plant Layout applications, using Inventor, Autocad, Pro Engineer, MSC Patran. Heavy Engineering Environment, International Earth Moving Machinery Manufacturing Company in South Africa.

BE Mechanical Engineer with 5 years experience in Piping Stress Analysis

Experienced exploration / production geophysicist and geologist with major Exploration Companies

22 years oil field Experians. Higher secondary.

Over 23 yrs of heavy earth field mechanic. AAS in Heavy equipment and diesel Technology. Lack final semester for BA in Training Industry & Business. CAT and Kamatsu trained.

AutoCAD, PDS (3-D modeling). Lead engineer of erection department

I hold a degree in Polymer Eng. from the Federal University of Technology Owerri, Nigeria. I am proficient in Autocad 2D/3D modelling, HYSYS, Bentley Auto Plant/P&ID, Boiler Maker, Autodesk Inventor

HIGHLY COMPETENT IN BUILDING AND ROAD CONSTRUCTION WORK(B.ENGINEERING,CIVIL)

Instrumentation technician with nine years experience in maintenence,repair,calibrating and installing of electrical,electronic and pnuematic equipment.

Mechanical Engineer with manufacturing experience

I am an electrical engineer. its been 3 years then when i start practicing my profession.my first year of experience was as a machine technician in manufacturing company.after that ,until now i am working on power plant construction as an intrumentation and control engineer.

BSc Degree in Geological Engineering with 3 years experience in both exploration and mining. Good knowledge in Surpac and MapInfo with discover. I am a good team player with the ability to innovate and motivate.

Self motivated geophysicist engineer with knowledge in Petrophysics and seismic business.

master degree of earth science, no experience, very very motivated to start a geological career!!!

Detail oriented with the ability to multi-task. Knowledge in Windows Application such as MS Office, Staad Pro and AutoCAD. Good communication skills

Looking for a Position to futher my skills in Sandblasting and Painting

Having 6 years experience on Instrumentation and Fire & Gas department in Oil & Gas, refinery,chemical plants on large scale integrated Distributed Digital Control Systems and Pneumatics / Motorized / Electronics and SMART series of field instruments in new projects and Maintenance.

NDT Technician

6 years undergound experience doing all jobs from moving supplies to drilling and blasting. Most of my experience is bolting with jackleg and stoper as I have been doing it for 5 years.

Complete maintenance of electrical, electronics and instrumentation:-

RHCE, CCNA

Instrumentation design engineer oil and gas

More than two years experience in process engineer

An astute professional with over 3 years experience and nearly 2 years in the areas of Maintenance Management, Planning and Scheduling and MAXIMO 5.2 Implementation

My expertise includes strong hands on technical skills with offshore survey and construction, maintenance and system interfacing. I am highly skilled in system maintenance, further I have proven the ability to manage projects too

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 [ 128 ] 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out