Resume - Co-ordination and inspection of all Quality Control activities like Surveillance...

Misco Jobs

Resume #87328

CONTACT INFORMATION:
View contact information...

PROFILE

* BE in Mechanical Engineering.
* Familiar with various ASME, AWS, BS, API, ABS and GL codes.
* Good working knowledge of Windows NT/98/'00/XP, MS Office and Language C.

PROFESSIONAL OVERVIEW

Career Span of 4 years includes Jobs concerning:-

„« Fabrication of Structural, Piping works, Equipments & Vessels involved in JACK ¡VUP RIGS.
„« New Construction and Refurbishment of complete jack-up rigs.
„« Process Piping.
„« Offshore Living Quarters.
„« Pressure Vessels, Tanks, Heat Exchangers etc.
„« FPSO conversion module, turret and top side piping.

PROFESSIONAL EXPERIENCE

1- MARITIME INDUSTRIAL SERVICES, MIS CO. LTD INC. (From 2007 July 01 to till date)

Working as QA/QC Engineer for MIS CO. LTD SHARJAH for their Marine and New build Rig division.

Job Summary: Co-ordination and inspection of all Quality Control activities like Surveillance of day to day Fabrication, Welding and Erection of Piping and Structural works of Rigs, Co-ordination with clients, Reporting to Project Managers, Coordinating and witnessing of various N.D.T & Destructive testing, documentation.

PROJECTS HANDLED

F&G SUPER-M2 JACK-UP DRILLING RIGS- (New Construction)

„« Two New Build Rig for Sea wolf Oilfield services Ltd.

„« New Build Rig for KSAM Energy.

„« Two New Build Rig for Mosvold.

„« Two New Build Rig for First Energy Bank.
Refurbishment.

„« Rig, Arab Drill-8.

„« Saudi Aramco.

Working as QA/QC Engineer for the construction of new rigs
Responsibility includes the inspection of
* Inspection of Various materials involved in the project.
* Marking, Cutting, Fit-up and welding inspection of Hull panels, sub assemblies and block assemblies.
* Inspection of leg fabrication and welding.
* Dimensional Inspection of all Critical Structures.
* Inspection of Spud cans fabrication and assembly to legs.
* Cantilever, strong back and drill floor fabrication and erection to hull.
* Inspection of Lower guide fabrication and welding.
* Visual inspection of hull tanks.
* Inspection of piping spool fabrication, welding and erection.
* All mechanical equipment involving engines, pumps, filters, compressors, etc.
* Fabrication of different pressure vessels (P-tanks) and different tanks for rigs.
* Accommodation Module Outfitting to class requirements including HVAC, Insulation, Plumbing and Fire standards.
* Attending and witnessing FAT's as per Class/Regulations
* Reviewal of Welding procedures and performance qualifications
* Good Knowledge of various Non-destructive testing such as Radio graphic testing, Ultrasonic testing, Magnetic particle testing, Visual Inspection, Liquid Penetrant Testing, Hydro testing and Pneumatic testing.
* Surveillance of day to day Fabrication, Welding and Commissioning activities of various equipments such as Cranes, Jacking System and Rack Chokes, Shale Shakers, Derrick ( Structural and Piping), High pressure Mud, Cement and Choke/Kill System, Mud Pumps and Engines.

Worked as QA/QC Engineer for MIS CO. LTD SHARJAH for site projects.

RASALKAIMAH (RAK) GAS PLANT

Project Handled

„« ATLANTIS GAS PLANT
„« SOUR AND SULPHA TREAT (EXTENSION PLANT)

* Inspection of Various materials involved in the project.
* Marking, Cutting, Fit-up and welding inspection of piping spools and structures.
* Reviewal of WPS/PQR for materials of carbon-steel.
* Inspection of mechanical equipment erection and foundations.
* Monitoring day to day activities in shop as well in site.
* Co-ordinate NDT and conduct NDT test as per spec, requirement.
* Release for painting after welding.
* Test pack review, approval and witness hydrostatic test.
*. Making punch list to construction as per line list and P&ID.
* Preparing QC documents.

WORKED AT DUBAI DRYDOCKS WORLD FOR SBM OFFSHORE SYSTEM

PROJECT: FRADE (FPSO CONVERSION) CHEVERON

* Inspection of piping in Modules, Topsides, Main deck and Turret.
* Final Weld visual of the joints.
* Making punch list to construction as per line list and P&ID.
* Review the Post weld heat treatment.
* Line walk, test pack review, approval and witness hydrostatic test.
* Inspection of system mechanical completion.

2, M/S Bhageeratha Electrical and Structural Ltd
(From June 2006 to May 2007)

Worked as an QA/QC engineer with Bageeratha Electrical and Structural Co Ltd which is a contractor of L&T Hazira
Job Title: QA/QC ENGINEER.

NATURE OF JOB

Project includes the fabrication and erection of piping and structural jobs for offshore modular platform. The Client for this project was Qatar General Petroleum Corporation and Quality Procedures are in co-ordination with Lloyds and Client.

Job Responsibilities

* Material identification with respect to Test Certificates
* Reviewal of WPS/PQR for materials of carbon-steel,
* Reviewal of drawings
* Fit-up Inspections of the joints
* Welding monitoring
* Weld visual of the joints
* Review the Post weld heat treatment
* Hydro test & Pneumatic test witness
* Maintaining records of all above procedure.

3 -Worked in KAP Fab Bangalore, India (Division of Kap India) as Project Engineer (2005 Aug ¡V 2006 may)

PROJECTS HANDLED

Hatch cover - Cochin - Cochin Shipyard
Supervised Construction of all the four blocks of the Hatch cover for the ship.
HM Vibha, Audugodi - Bangalore - HM Group
Supervised Construction and fabrication of all the truss beams for the mezzanine floors and built-up beams for all other floors including erection

Prestige Feroz, Cunningham - Bangalore - Prestige Group
Supervised fabrication and erection of mezzanine floors and construction of corrugated sheet platform for floors. The work also includes re-design of canopy and fabrication and erection of the peripheral beams for wind reducing roofing.

UB City, Museum road - Bangalore - Prestige Group
Supervised fabrication and erection of supporting shafts to a height of 80m for lift accessory. Also supervised cladding accessory for marbles at pillars under L&T.

Other Works
Supervised 45m bridge b/w two buildings at 6th, 12th and 18th floors for ETA constructions. Designed supporting clamps for marble holder for Sri Thirupathi Granites. Designed the whole roofing system at both levels of a two storey building using ISMC, ISMB, ISA, Plates, Tubes etc. for NJK Enterprises. Estimated the rate of the work and prepared tender for the work of airport for godrej, Sadhasiva sugar plant, Indian cane power Ltd., Balloon factory at coimbatore and molasses tank.

Job Summary
* Review of Structural Shop drawings and issue to shop for Construction.
* Follow up work progress and reports to Production Manager.
* Prepare miscellaneous shop drawings using Auto cad.
* Ensure fabrication/welding of structural members as per the drawing.
* Assist in calculation works for preparation of Estimations/Tenders.
* Follow up of civil works with respect to shop drawings issued to shop.

ACADEMIC RECORDS

„X Bachelor Degree in Mechanical Engineering from Anna University at Mailam Engineering College, Mailam, Villupuram, Tamilnadu India.
(2003-2005)

„X Diploma in Mechanical Engineering from Technical Board at Mohammed Sathak Polytechnic, Kilakarai, Ramanathapuram, Tamilnadu, India.
(1999-2002)

ACADEMIC PROJECTS DONE

„X Automatic Vehicle Parking on Open Terrace of A Multistoried Building ¡V Project during (BE).
„X Construction of pulverisor ¡V Project during Diploma.

COMPUTER PROFICIENCY

Packages: CATIA, ANSYS, MS project, Auto CAD
Operating System: Windows 98/NT/XP
EXTRA & CO-CURICULAR ACTIVITIES

„X Participated in ISTE students chapter group discussions.
„X Participated in entrepreneurship awareness program at college level.
„X Participated in Workshops on -
„« Advanced Materials and Metallurgy by ISTE Students Chapter.
„« 5S and KAIZEN.

PERSONAL DETAILS
Date of Birth: 7th September-1981
Religion: Islam
Nationality: Indian
Languages Known: English, Hindi, Malayalam & Tamil
Driving License Valid UAE &Indian License

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5651 to 5700 of 15508)

Go to Search Parameters...

Brief Description

B. Tech (Electrical) with more than 15 years experience in project management, design, engineering, installation and commissioning of electrical & control system in combined cycle power plants and substations

Feasibility studies, basic and detailed engineering, cost estimates; Process Flow Diagrams (PFD’s) including mass & heat balances; Process and Instrumentation Diagrams (P&ID’s) including line sizing, equipment specifications; HAZOP participant, Vendor inspections, commissioning & start-up assistance

I have 12 years experience in Automation(DCS & PLC). I also worked as project management.

For the past 15 years my career in the field of Inspecting with BHEL and ARAMCO has focused onshore oil and gas production operations and construction of Petrochemical Plant, Power Plant, and LNG storage tank in India and Middle East.

Integrated Drilling Evaluation and Logging system, integrated down hole directional drilling, drilling mechanics and petrophysical data measured within few feet of the bit and transmitted to the surface in real time. Log interpretation and Formation evaluation from recorded logs.

Assistant professor-Hydrogeologist with 9 years of experience Main fields of expertise: -Evaluation of groundwater resources in various aquifers -Water supply schemes (well design, pumping tests etc.) Participated and led over 60 Research projects from 1995 Full PC and GIS skills

EXPERIENCE Environmental systems design and installation Site assessment and remedial investigation Wastewater treatment systems Project oversight and quality control

I am well trained to handle terminal operations, stores / materials management and Engineering / Maintenance activities related to Oil terminals / Petroleum retail outlets. I am 38 years old and have no problem in relocating to a suitable location / posting.

Experienced Oil and Gas professional with over 12 years engineering, applications, marketing experience. Self starter with experience in Electric Submersible Pumps (ESP), Variable Speed Drives (VSD/VSC), downhole instrumentation, permanent monitoring and fiber optic monitoring systems.

To secure supply position-involving procurement, contracts and logistics coordination where my skills may be fully applied overseas, Africa or domestic assignments

ecologist with a background in zoology and specifically ornithology where the focus of his PhD research was on the impact on bird communities in general and gamebirds in particular and their response to various forms of agricultural practice.

Software Engineer with over 15 years experience in the development of software, database designs and real-time software solutions.

Presently working as Finance Manager for a Swiss MNC in Bangalore. Over 14 years experience both in India and Middle east including E&Y audit firm covering areas of finance, accounting, Control, budget, financial reporting, system design and implementation.

I am a process control engineer with over 15 years of experience of design, implementation and commissioning of process controllers for the refining and petrochemical process units. I am available to work on contract basis immediately.

I'm Egyptian Geophysicist with more than 15 years experiences in seismic data processing ( 2D & 3D). I gain experiences in well logs processing and producing synthetic seismogram. My full detailed experiences are in my CV......Regards....

A total of eighteen (18) years, Electrical, Mechanical, Piping, Instrument drafting experience in a wide variety of industrial sectors

Technical mining management professional with proven success in surface mine engineering, environmental and operations searching for a position in Operations or General Management.

INSTRUMENTATION TECHNOLOGIST NAIT graduate June 30, 2004. Previous experience as Plant/Process Operator in coal mine. Seeking entry-level position in the industrial field that allows use of my acquired technical training and includes exposure to a wide variety of occupational related tasks

Principal environmental skills with oil & gas experience in: - EMS and Integrated HSEMS - Hazard, Impact and Risk Assessment - Waste, Energy and Material Resources Management Systems - Auditing and Performance Analysis - Training and Awareness Development

Mechanical Engineer with Masters and experience in oil and gas. Competent in thermal systems and two-phase flow analyses. Maintenance Engineering experience with rotating and fixed equipment.

I hold a B.Sc. degree in Civil Engineering, 15 years experience in construction project supervision and project management. Overall I'm capable of supervision/management of most types of construction projects.

SUMMARY OF EXPERIENCE •15 years Post Degree Experience in reputed multinational Oil & Gas, chemical process industries with emphasize to project execution, plant maintenance, and workshop management and inventory control on spare and consumables.

A highly accomplished gas turbine field engineer and power generation equipment service director. Experienced in turbo-electric machinery installation and maintenance, asset and contract management, profit and loss finance, electro-mechanical troubleshooting, quality control, and staff management.

BSC in Mech. Eng., post grad. in Petroleum Eng., reservoir engineering exp.( developing and management, black oil, gas and composition reservoir simulation, tech. and econ. eval. Studies, IOR and EOR methods-8 yrs.) and IT consulting, services and project management (12 yrs.)

I have robust bases in the quantitative and qualitative expertises of oil productions raw product and refined, the controls of expeditions by pipe, vessels or lorries. This experience(experiment) allows me to transpose my knowledge in sectors of industry as the mining extraction.

Enclosed please find my detailed resume for Structural Engineer job openings you may have. As my resume will attest, I appear to have excellent qualifications for this position

My background is in the offshore fabrication industry. I am interested in Project Management and Fabrication Management, but will certainly entertain any offers, especially for positions in Australia.

2002- Present Head of Upstream Joint venture of NPC/SASOL 1998- 2000 Sr. Process Eng. IOOC / TS (TOTAL SIRRI) 1994- 1998 Production Eng. SIRRI /KHARG/LAVAN ISLAND

Skilled HSE professional seeking employment

To expand my knowledge, enthusiasm & ability by assuming a position of higher responsibility, with the qualities of adaptability, dynamism & perseverance.

Well experienced Project Architect / Coordinator /Auto Cad Designer / Quantity Surveyor

Qualified welder 10 years experience ( QC, NB, AB) pipe welder , willing to travel

With 7 years of rich experience in Plant Operations, Production. Presently working with Niko resources Ltd., as a Lead Production Operator.Functional expertise in handling the production operations with key focus on bottom line profitability by ensuring optimal utilization of resources.

I did B.Sc (Mathematics), Diploma In Mine Surveying, and Advances In Mine Surveying Technology (Indian School of Mines) . I am Using SURPAC Software From last 14 (Fourteen) Years in U/G Mine as well as in Open Pit Mine.

I have over 15 years of experience in this field and acquired enough knowledge. I had handled very challenging assignments. As an Instrument foreman I was fully involved in my business wherein I had to identify potential opportunities and gain wide knowledge.

20 years experience in EHS

Feasibility studies, Process Design & Consultation, process Development , Project Management, Electro-mechanical installation, Pre-Commissioning & Commissioning, Start – up & Operation of Industrial Projects

I had successful career in Army and now voluntary retirement and working for MNCs in Bangalore, India. I have vast experience in Administration, Human relation management and facility management.

I have ten years experience in SITEP (ENI partner) and my qualification is Maintenance supervisor

Production supervisor/production operator/ on job trainer

Health, Safety Environment Engineer/ officer &

Geological exploration works including mapping, bulk sampling, drill hole planning, logging and sampling during drilling.

highly motivated exploration geophysicist

Instrument Design Engineer with 4 years of Experience in a world recognized oil and Gas Company JGC-Descon, having experience of Instrument Master Index , JB Wiring, ILD Generation, Main control Panel Wiring, PLC Cabinet Wiring, Main Control Panel Schematics Diagram, HOOKUps, MTO

Structural Cad Detailer, Site Engineer

Co-ordination and inspection of all Quality Control activities like Surveillance of day to day Fabrication, Welding and Erection of Piping and Structural works of Rigs, Co-ordination with clients, Reporting to Project Managers, Coordinating and witnessing of various N.D.T & Destructive testing.

Mechanical Engineer with AWS CWI # 09021281. I have 4.5 years experience in the field of Quality Control and welding inspection in Oil & Gas Projects involving Onshore Pipelines and piping of platforms, Piping of Refineries, process plants. Fabrication of Pressure vessels, Boilers and Heat ex

QMS development and certified lead auditor for ISO 9001:2008

Heavy diesel mechanic since leaving school 20 years ago

Designer having 10+ years of experience in the Electrical detailed engineering on Power Plant, Oil &Gas (Onshore/Offshore) and Petrochemical projects in both Indian & Global projects.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 [ 114 ] 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out