Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #87372 next resume »»
CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATION:

I graduated from Sultan Ageng Tirtayasa University, in Indonesia on October 2004, majoring Chemical Engineering Degree. I have experienced working in petrochemical plant. During 10th years I have ever been worked at PT. Asahimas Chemical Indonesia ( VCM/EDC Plant ) from 1997-2007, now I am working in Yanbu National Petrochemical Co. ( YANSAB-SABIC) Saudi Arabia, as Senior Operator for HDPE (High Density PolyEthylene) from December 2007 - Now.
In process production, I have been experienced in startup and shutdown VCM/EDC plant and understanding with trouble shouting process. Following Annual Shutdown Maintenance. Good knowledge with operating distillation process, refrigerant system, and operating rotary equipment like as: pump, compressor.
In YANSAB, I have trained about slurry process, powder workup, powder treatment, like as: Continues Stirred Tank Reactor, Decanter Centrifugal, Fluid Bed Dryer, Conveying System, Membran System.
I also experienced with activity pre-commissioning, commissioning until startup BBTX Plant (Butene-1,Benzene,Toluene,Xylene) at Yansab.co as support commissioning supervisor during 6 month.
I am familiar with Process Flow Diagram (PFD), Piping and Instrumentation Diagram (P&ID), Isometric Drawing.
In safety matter, I used to do HAZOP and failure analyses for process design if there is new modification in plant. Also in safety regulation I familiar with Confine Space Permit, Hot Work Permit, LOTO, and other jobs execution in petrochemical plant/process isolation.

OBJECTIVE:
------------
CHEMICAL ENGINEERING,PROCESS TRAINER,OPERATOR PRODUCTION,DCS OPERATOR

WORK EXPERIENCE:
------------
* Yanbu National Petrochemical CO ( YANSAB ¡V SABIC )
Petrochemical Manufacture for plant HDPE ( High Density Poly Ethylene )
Since December 2007 ¡V now
As Senior Operator
At Yanbu ¡V Saudi Arabia
Job description:
* HDPE Polymerization with slurry process hostalen by basell technology (50 ton/hours capacity) with Continues Stirred Tank Reactor
* Preparation Catalyst THT (composition Mg- Ethylate and Ticl4) and Z-501 for making HDPE
* Operating Decanter Centrifugal (by Cooperion) for separation between solvent with slurry HDPE
* Operating Fluid Bed Drying For Drying HDPE slurry from Centrifugal
* Operating Membrane Unit (by Cooperion) for separation between nitrogen with solvent
* Operating Conveying system (by Cooperion)for transfer powder HDPE to powder treatment unit
* Knowledge Extruder ZSK 320 and ZSK 380 Type
* Operating hexane column distillation
* Operating propylene refrigerant system
* Handling wax
Note: - As long as joint with Yansab.co, ever following pre-commissioning and
Commissioning activity in BBTX (Butene,Benzene,Toluene,Xylene) Plant and HDPE Plant

* PT. Asahimas Chemical
Vinyl Chloride Monomer /Ethylene Dichloride( VCM/EDC ) manufacture
As Field Operator Since April 1997 ¡V April 2003
As Senior Field Operator April 2003 ¡V December 2007, at Cilegon-Indonesia
Job description:
Main Job:
* Capable to operating of all process chemical equipment such as: Pump, Compressor, Blower, Column distillation, Plug Flow reactor, Fluidization Reactor, Heat Exchanger.
* Coordinator with maintenance, instrument, electric arranging preventive process schedule.
* Familiar with control and operating loading/unloading Ethylene, EDC, and VCM from ship.
* Familiar with preparation raw material when VCM/EDC plant would start up
* Familiar with startup/shut down Reactor Liquid Phase and Fluidization Reactor
* Familiar with control and operating distillation column, absorber, stripper column
* Familiar with BOG Ethylene, condensation vapor Ethylene in the storage system used a high pressure compressor ethylene with understand saturated liquid method
* Familiar with transfer product from storage to storage at the tank farm
* Making shift production report before change shift, consist of all activities in one shift

„X PT. Polypet Karya Persada, Cilegon- Indonesia
Polyester (PET) manufacture
As Lab Technician
Since August1995 ¡V April 1997 in Cilegon - Indonesia
Job description:
* Prepare solvent or reagent at Laboratory especially for analysis routine.
* Analysis of raw material until product.
* Analysis water treatment, water in process.

EDUCATION:
* Elementary School ( Graduated 1988 )
* Junior High School ( Graduated 1991 )
* Senior High School of Analyst Chemical, Padang ( Graduated 1995 )
* Sultan Ageng Tirtayasa University, majoring in Chemical Engineering Bachelor's Degree ( 1998 ¡V 2004)

TRAINING/COURSE:

* Achievement Motivation Training ( AMT ), Padang, 1994
* English Course, JIMS - Serang, Indonesia(2007),Intermediate Class
* English Course, International House, Yanbu ¡V Saudi Arabia, Level 3
* Field Fire Fighting Training, PT Asahimas Chemical, Cilegon, Indonesia, (1997)
* Environment Awareness Training, PT Asahimas Chemical, Cilegon, Indonesia (2006)
* Environment Awareness Training, Yanbu Petrochemical Company, Saudi Arabian (May 08, 2008)
* Safe work permit training, Yanbu Petrochemical Company, Saudi Arabian (April 19 -20, 2008)
* Safety Work Awareness (SWA), Yanbu Petrochemical Company, Saudi Arabian (October, 2008)

ADDITIONAL INFORMATION:
------------
„X Having good ability in operating computer application of windows ( MS word and MS excel )
„X Willing to work hard, dynamic, good interpersonal skills, and communication.
------------

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1201 to 1250 of 15497)Go to Search Parameters...
Brief Description
field appraisal, depletion, material balance, well test, reserve estimates, water injection, fractional flow, gas injection, reservoir evaluation, production forecast, reservoir and production monitoring, data acquisition, multilaterals, development projects, reservoir modelling and simulation.
7 years experienced in Oil Refinery Operations . 8 years experienced in Petroleum and Gas Processing Engineering (Design, Research and Development of Oil Refinery Processes). 5 years of international exposure in Europe , Asia, Africa, Middle East .
Knowledgeable and experienced Design Procedures with 15 years road construction experience
I have a record of outstanding success in the field of Instrumentation Engineering for the past 20 years with various clients and consultants in India and overseas for the Oil & Gas (both onshore and offshore upstream)/Petrochemical/LNG Projects/Plants.
Professionally Qualified Engineer / Manager, Harvard Business School Alumni, Certified Project Manager (PMP) - Now In General Management In Oil & Gas Up & Mid Stream
I graduated from Sultan Ageng Tirtayasa University, in Indonesia on October 2004, majoring Chemical Engineering Degree. I have experienced working in petrochemical plant. During 10th years I have ever been worked at PT. Asahimas Chemical Indonesia ( VCM/EDC Plant ) from 1997-2007
City and Guilds Motor Mechanical Technician Diploma and full tech certificate. Languages: English, Arabic and French Spoken fluently
MINING ENGINEERING,M.B.A(MARKETING)
Construction project manager
PDS Frameworks, Autocad, Microstation
Well trained geologist in field mapping,structural geology and mineral exploration affairs
Objective. Seeking an increasingly responsible position with an opportunity for professional challenge and growth while combining my areas of experience in the field of electrical works to support and enhance corporate goals and objectives. Educational Qualification. 1.Diploma in Electrical Engineer
Trained Radiation Protection Officer & Health Physicist from India
I have sailed as Master on Tankers and have good experience in Oil / Chemical / Gas Tankers.
Skills: •Able to take proper and quick decision. •Very much interested to work in technical environment. •Excellent ability of producing and reading working drawings. •Able to work alone or in team very environment. •Able to manage all aspects regarding to engineering. •Electronics understanding
I am a dedicated, performance and goal oriented multi-tasker who will do whatever is necessary to help the company reach its maximum potential.
Applying for the post of HSE CO-Ordinator
Assist sales team in all technical challenges while meeting with clients, check & modify well plans,calculate Torque & Drag, drill string & BHA assembly,hydraulics,• Managed and maintained up to 45 jobs in Southern Manitoba, Southern Saskatchewan, all of Alberta and Northern British Columbia.
Mechanical Engineer having 15 years experiance in tubular n flat products of stainless steel like sheets, plates, coils, pipes in ss304, 316, 304L, 316L.
28+ years with broad experience in Petroleum Engineering (Facilities, Production, Reservoir, etc.). Onshore, offshore, international. Any location considered. Rotational position preferred.
A self starter, motivated and eager to learn new things, willing to provide guidance and help others become team players by setting an example and leading the way.
Seeking a challenging position in Chemical, Oil-Refining, and Petrochemical Engineering field where my technical, professional, and problem solving skills can best be utilized for the future growth of the company.
Drilling Supervisor/Engineer with B.S. in Petroleum Engineering and 30 years experience.
20 years in Oil/Gas in Eng. ,Procur.and Construction including Piping Design in accordance with international codes, Procurement Technical Services & Construction Supervision. Management of Eng. Staffs in Multinational and International Environments Conversant with ARAMCO and SHELL DEP Specs
Instrument technician - PLC/DCS programmer
Senior Offshore Structural engineer with 13 year of post graduate experience in analysis & design of offshore structures
Strong managerial and technical skills successfully proven in planning, executing and managing business process, projects and Drilling & Warehouse operations, delivering timely results. Analytical, client-oriented, problem solving, leadership and communication abilities complement my professional
20+ years experience as Piping Designer in FEED, EPC, EPCM, Detail Engineering in Oil & Gas, offshore,Petrochemical,and Refinery & Chemical industry.
Management and supervisory skills
I am a Senior Petroleum Engineer Technologist with over 20 years oil and gas experience. My diverse background provides a comprehensive knowledge of all aspects within the petroleum industry.
Experience in Pre-commissioning, Commissioning, Startup,Operation and Trouble shooting.Acquaintance in Panel operation. Experience in operating Distillation Columns; Experience in Water Treatment/Waste Water Treatment; Driving HSE performance; Knowledge in Computers and Operating System. Acquainta
I am an independent consulting Mining Engineer based in Perth, Western Australia. I specialize in temporary management replacement, mine design, and mine project evaluation in Australia, Asia, and Latin America. No job is too small and all inquiries will be responded to.
Experienced, registered professional petroleum engineer with 20+ years direct petroleum-related experience. Two graduate degrees in Petroleum Engineering (Stanford University). Extensive management experience with senior technical professionals in all related disciplines.
Process economist for complex chemical and metallurgical processes
Consultant in well stimulation, well completion, production operations and reservoir engineering. Designed and supervised: - Hydraulic fracturing and TIF, Western Siberia - Massive hydraulic fracture in very high temperature reservoirs - Matrix acidizing, acid fracturing, scale control
With some 20 years of work experience,my research has focused on fish stock assessment and management. My interests include applied Statistics and ecological modelling to assist in analyses of various aquatic resources. He has a Bachelor in Zoology, and a M.S. and Ph.D in Fisheries.
I put at your disposition 23 years of experience in the laboratory and field activities at PDVSA-Intevep, Research Center and Technological Support for the Oil Industry of Venezuela, with the drilling & completion and materials performance groups for production operations.
- Head of electron microscopic laboratory (mineralogy, asbestos, x-ray-analysis) - Research staff member (electron microscopy, Material science) - Lecturer (petrologic, ore and electron microscopy, mineralogy) - Research assistant (petrologic and ore microscopy) - Exploration geologist
Petroleum Engineer
DSV with over 20 years experience.
Diploma of Associate Engineer (Telecommunication / Electronics Technology), Computer uses Certification in Software Application, Installation and Hardware troubleshooting with maintenance. Pakistan, Certificate of instructions on computer operating systems, Basic training of Radio mechanic
I am a Senior Process Engineer with 27 years of operation and process design experience in the oil and gas industry. I worked for Saudi Aramco for 23 years as a Senior Process Engineer in an NGL Plant, gas plant, & a refinery. I have B.S & M.S. in Chemical Engineering from University of California.
Civil Marine, Dredging & Coastal Engineering. record: 70 projects
30 years experience in Metallurgical Investigations and Concentrator Operations processing base metals.
Road works
Chemical Engineer with experience operations/erection/commissioning of Oil and Gas,Large Chemical Complex
Conceptual design, front end and detailed engineering of process plants including preparing piping layouts , equipment layouts ,plot plan,Preparing and checking PDS 3D/Auotplant models,Isometrics,Pipe support and stress analysis,MTO,BOM,Manpower Management,to complet project within budget and time
Commissioning, Start up Specialist, Operations Supervisor, OJT, Proactive multi-skilled Team Leader with detailed knowledge of process plant/man-management. HND in Chemical Engg; Valid Offshore Pasport Holder.
I have experience with rotating equipment such as turbine, compressors, motorrs, pumps and gearboxes.
12 years of experience in various design, training and project planning activities which involves Static and Dynamic Stress Analysis of different Nuclear, Petrochemical and Pharmaceutical Piping Systems, Selection and Design of Pipe Supports, Piping Layout design, Isometric Drawings, Integrated Pla
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   [ 25 ]   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Goto Advanced Search...
Keywords: (e.g. mining engineer)Find results with:
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com