Resume - An extensive career having an experienced blend of commercial and construction c...

Misco Jobs

Resume #87418

CONTACT INFORMATION:
View contact information...

CAREER EXPERIENCE

UNITED GROUP INFRASTRUCTURE (UGI) 3/2004 - current

Project Manager - Water Supply Alliance (Melbourne) 3/09 - current
As part of an alliance between UGI/Baulderstone/SKM and Melbourne Water, responsible for managing various WTP upgrades from inception through design, construction to completion and handover.

Contracts Manager - Water Cycle Alliance (Queensland) 11/08 – 2/09
Short-term assignment responsible for the preparation of contract issues and delay claim submission for Pimpama WWTP. Conducted investigation, research, complied reports and recommended outcomes.

Contracts Manager - EastLink Motorway Project (Melbourne) 7/06 - 10/08
Member of the senior management team on this $125m D&C project with responsibilities including:
* Preparation of acceleration claim and arbitration claim submission.
* Sub-contract development and consolidation through to award of contracts.
* Monthly progress report, claim preparation & submission.
* Introducing efficiencies to internal procedures and processes.
* Review of subcontract delay claims and variations, assessing and recommending outcomes.
* Conducted vendor operator training and oversaw O&M manual production.

Project Manager - Cotter Googong Transfer Program (ACT) 7/05 - 6/06
Managing an alliance between UGI/John Holland/SKM to design & deliver several bypass projects and chemical dosing system to enable water transfer from Mt Stromlo WTP to Googong Dam for ActewAGL in Canberra. Key deliverables included:
* Meeting very strict fast track project deadlines and KPI's.
* Subcontract package preparation, negotiation and procurement.
* Testing of piping, pumping stations and commissioning of dosing system.

Construction Manager - Central Highlands Water (Ballarat Vic) 3/04 - 6/05
Construction and commissioning of four Water Treatment Plants in rural Ballarat comprising Ion Exchange, Reverse Osmosis, Dissolved Air Flotation, filtration, drying ponds, storage tanks involving mass earthworks, road works, buildings and associated mains piping.

Scope of works included total responsibility for management of civil (for buildings//roadwork's & drainage), mechanical, electrical and process contractors on four separate sites. Disciplined approached kept projects on schedule and within budget despite adverse weather conditions through.
* Planning, scheduling and co-ordination of construction, delivery and installation activities.
* Worked closely with the designers to refine the final delivered product.
* Monitoring construction to deliver savings to contractor & client.
* Oversaw all commissioning activities on site.

O'DONNELL GRIFFIN (TYCO) 10/02 - 9/03
Project Manager - Harding Dam MF Plant, Karratha WA
Overall management of the construction for the Water Corporation of WA of a 65ML/d Micro Filtration, Chemical Dosing Plant and Pumping Station at Harding Dam with accountability for the total scope of civil, mechanical and electrical disciplines.

IONICS ENERSAVE ENGINEERING - MALAYSIA 10/99 - 4/02
General Manager - Penang Operations
Full profit centre and management focus responsibility for this branch. Overseeing a team consisting mainly of service engineers and technicians providing full service, operation and asset plant management services for WTP and WWTPs. Took over poor performing operation and implemented strategies resulting in:
* Introduction and acceptance of change in philosophy and operational procedures.
* Implemented preventative planning and maintenance procedures.
* Increased branch operational activities with securing of key maintenance service contracts.
* Turned loss-making operation into sustainable profit position within nine (9) months.

Project Manager - Silterra Wafer Fab Project
Concurrent with the above GM role (During 2001), took over at the request of Fluor Daniel (Principal Contractor) and successfully brought to a conclusion the construction by Ionics of the fully automated, 1,200 gpm acid waste neutralisation / treatment facility and chemical bulk storage facilities at Kulim High Tech Park.

ALFA LAVAL MALAYSIA - Operations Manager 8/96 - 8/99
Primary responsibilities included managing the design, installation and commissioning of liquid separation, filtration and transfer systems to the dairy, beverage, pharmaceutical and chemical industries. Appointed from Australia to arrest 4 years of prior unsuccessful management and impacted by firmly establishing Alfa Laval as the No 1 supplier for quality, technical innovation and service, in Malaysia, in a highly competitive market.

PIONEER ASPHALT - Bitumen Spray Division Manager 2.5 yrs
Hands on role managing road surfacing works associated mainly with road and car park construction involving:

VIC ROADS - Engineer 12yrs
Various roles involved in the design and construction of main roads and highway work in greater Melbourne. Majority of period involved tendering, contract administration and on-site project supervision with works extending from minor intersection modification to major highway duplication and rail overpass work.

Other employment included:
APV AUSTRALIA PTY LTD - Project Manager (Aust/NZ)
KLINGER AUSTRALIA - Southern Region Manager
McNEALL PLASTICS - Applications Engineer
DYNAPAC - Product/Compaction Engineer.

KEY SKILLS AND COMPETENCIES

PERSONAL
* Demonstrated strengths in people management. Able to lead by example with focus on teamwork and accountability.
* Strong commercial and financial acumen accepting accountability for all inherent requirements for managing costs and profit, with sense of personal responsibility.
* Practical action and business nous dexterity combined with a natural disposition for keeping a finger on the pulse of activities.
* Analytical and incisive – ability to combine strategic problem solving skills with common sense, analysis and win-win resolution.

PROFESSIONAL
* Proven track record in project and asset management across multi disciplined sites with a focus on tight delivery programs.
* Successful management of assignments, external agencies and subcontractors ranging from product manufacture to project management.
* Over 30 years experience in the engineering field with a natural, yet professional approach towards getting the job done.
* Practical experience of the intricacies and fundamentals in engineering associated with, construction, operation and maintenance.

PROFESSIONAL QUALIFICATIONS & BUSINESS TRAINING
Degree: MBA - International Business, Washington International University 7/02
Diploma of Civil Engineering: Caulfield Institute of Technology 1/81
Advanced Courses: Time Management / Situational Leadership / Contract Management
Tack International Courses: Leadership in Management / Management Accounting
Knowles (Australia) Contract Management Seminars 05 - 08

MEMBERSHIPS of PROFESSIONAL ORGANIZATIONS
Australian Water Association
Institute for Independent Business
Institute of Management

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1851 to 1900 of 15478)

Go to Search Parameters...

Brief Description

Project Engineer & System engineer along with detail design experience and product development expertise gained from 20+ years working for NASA.

skilled tradesman. Mobile/Tower crane operator, Heavy duty equipment mechanic, Rigger, Inspector, Apprentice Millwright

An extensive career having an experienced blend of commercial and construction credentials in the engineering/infrastructure field including civil and mechanical engineering works involving co-ordination of consultants, contractors & public utilities, managing deadlines and optimising costs

A professional with 24 years of multi-functional & multi-ethnic/culture experience in Technical and Project Management areas. Experienced in handling multi projects, excellent communication skills & man management capabilities, team building, business road mapping, problem solving abilities

I am a Mechanical Engineer with work experience basically in Oil & Gas and Refining Project Management, Gas Compression Plant Maintenance, and Process Safety Management. Currently I live in Venezuela and planning to relocate to the United States. I have dual citizenship and fluent in both languages.

25 years of professional experience in the Front-end and Detailed Design and Engineering, Projects Engineering, PMC, Factory & Site Acceptance Testing, Supervision of Installation, Testing and Commissioning of state-of-art DCS, SCADA, Safety Shutdown and F&G Systems and field instrumentation

TQM facilitator & instructor /Lead teams to resolve to improve process/ 4 yrs offshore Maintenance Supervisor /2yrs manager offshores field/ 4yrs CMSM coordinator/6 yrs contol management stocks

Masters degree management. 20+ years commercial/ heavy industrial construction. Carpenter based w/15 years management

Field Acquisition QC. Over 20 Years experience in Land Seismic. 3D Design by OMNI and MESA. Field processing of 2D/3D land seismic data (MicroMax,ProMax, VISTA, APEX) . Creating and verification of SPS files. Static correction.

Environmental Compliance Manager Results-driven, Certified Professional Geologist with extensive leadership, knowledge and experience in ensuring environmental compliance.

Working as In charge OIL/GAS LABORATORY TESTING OF LPG/C2C3/NAPHTHA/OIL ETC. PROCUREMENT/CALIBRATION/MAINTENANCE OF EQUIPMENTS

Worldwide experience in planning, managing, designing and implementing a wide range of water resources and water supply projects.

French Engineer with international and overseas experience Contract Management, General Management In the field of Water Treatment.

OBJECTIVE: Add value by leading people and projects, solving problems, bringing order from chaos, turning dysfunction into productivity, in a petroleum exploration or development geology management position.

Management consultant/ environmental scientist specializing in NEPA, RCRA, CWA, CAA, environmental assessments and fraud investigations.

Contracts Experience in Construction, Management and Administration (EPC), Materials Manager (PMC), Materials Control, Procurement & Expeditor; Fluent in English, conversational in French, Russian. Seeking to continue professional career effectively utilizing my skills and gained experience

More than(18) years in piping design & construction. Specialize in stress analysis of piping system using Caesar 11. Worked in oil refineries, onshore & offshore, gas plant & petrochemicals e.g. Saudi Aramco & Saudi Basic Petrochemicals ,Petromin Shell & Jeddah Oil Refinery.

Registered Mechanical engineer with heavy industrial, mining and USACE construction experience.

Specializaion in environmental management in an iron ore industry backerup by the experience in a regulatory body dealing with environment conservation.

-University – Master Science in Geology evaluated by York University. -Environmental adviser course – 1000 hours;

Senior Mechanical Engineer (M.Sc.) having experience as plant manager and project manager, specialist in mining, safety glass, manufacturing plant and brewery investments.

Detailed Structural designs of Civil Structures(RCC structure i,e, Buildings(Multi-storied office and residential), Roads, Bridges, Culverts, earth retaining structures(Retaining wall), Dams, rig & machinery foundations for Gas exploration

More than 10 years’ experience of coordinating structural projects and technology development acquired during the Master and Doctor Courses in Civil Engineering and working as engineer in construction, aerospace, offshore and onshore industries.

Working as a Rotating Machinery Specialist with specialist skills in machinery Componenant condition monitoring by Vibration analysis (CSI RBMware), Bentley Nevada DM2000 online monitoring system, Adre data collection, Flexware performance analysis, Ultrasonic check by CSI sonic scan and etc.

Strengths: detail oriented, flexible, analytical, self-motivated, adaptable, effective communicator and articulate. Experience in field drilling operation management with extensive hands-on technical, administrative and managerial functions; drilling technology assessment & implementation, contract

Presently working as Site Supt. Civil here in the construction of Khursaniyah Gas Plant (KGP) at NGL Trains 1 & 2, Saudi Arabia with Saudi ARAMCO. Representing the client in all civil works aspect of the work, I supervise two (2) major contractors-Bechtel/Technip Joint Venture.

Mining Engineer from with 24 years experience in underground as well as opencast mines. I have exposure in Lead-Zinc, Chromate Mines, Bauxite Mines and Limestone Mines. Presently, working as functional head of Limestone Mines captive to Cement plant.

I am confident and Expert; I am having 14 years experience with FIDIC contracts Worked on projects of Infrastructure Projects, Highway Roads, Bridges, Underpasses, Mechanical, Electrical, Water Work, Strom Water, Sub base Drainage, and Irrigation system, Construction of soft and hard Landscaping

Over 9+ years of experience in Portfolio management, Start stream TLM, Accounts, Operations & system automation.

Structural design of Post Tensioned Concrete Bridge, RCC High Rise Building, Tunnel, Highway Interchange Structure. Familiar with AASHTO LRFD, BS, ACI. Skilled in finite element softwares (MidasCIVIL, SAP, STAADPro, SAM-LEAP5 and AutoCAD). Specification, Report, AIP writing.

An accomplished and result-driven Management Executive with multi-faceted marketing experience. Exceptional communicator with demonstrated success interacting with people at all levels.

Free! Dear Sir untill now I have more than 9 years experience in construction, conversion & repair of the Supply Vessels, ULCC tankers, Tug Boats & Jack Up Drilling Rigs. 6 years experience as Project Engineer. Currently I work at the position of the Project Coordinator in ship repair.

Lead Process Engineer for Oil& gas Offshore/Onshore projects for Conceptual, Basic /FEED and Detail Engineering, Optimization and De-bottlenecking

I have a total of 13 years of experience working as an Engineer in the Petroleum Industry. For the last 10 years I have been working as a Process Engineer handling all aspects from Conceptual Engineering through to the Detailed Engineering Phase. I am seeking work as a Senior Process Engineer.

Involved in commissioning and pre-commissioning activities.

To secure a long/short-term contract, or permanent position. In Construction, Maintenance, Commissioning etc. My current position is as an Electrical/Instrument Engineer (as to the above position I am negotiable).

Fourteen years of combined experience in petroleum engineering and G&G (U.S. & international.) Experience includes integrated 3D reservoir modeling, numerical simulation, reserves assessment, field development, and reservoir studies.

Three years diploma in Civil Engineering (Technical Education Board of Punjab Pakistan)

„Ï A thorough understanding of risk engineering and Health Safety and Environmental (HSE) management systems in petrochemical, chemical, oil & gas industries, gained in a consulting environment. „Ï Consulting experience related to Process Safety Management & Fire Audit, Dust Explosion

Health, Safety and Environment Specialist/Instructor with National (CIED-PDVSA) and International (North Sea) Certification. HSE and H2S Instructor. 20 years experience in Drilling, Production and Crude Oil Transportation in Safety related areas with National and International Operators and Contract

HVAC PROJECT MANAGER

Professional Oil and Gas Geologist (Masters Level) with 10+ years global Wellsite and Operation Geologist experience. Experienced in pre-planning, supervising and post-well wrap-ups of multi-well/multi-rig programs.

Chemical Engineer, P.E. Petrochemical Design Background Experience

ISO Compliance, 6 Sigma, Asset Mgmt, Vendor Mgmt, Catering, Transport, HK, Costing & Budgeting, HR, Employee welfare, FBT, Guest house mgmt, PF, ESIC, Medical, Fire drill, Security, Solving Employee feedbacks, Auditing, Billing.

I am a proficient project Manager in GIS with ESRI and ERDAS technologies

 11.0 years exp. normal Operations in a petrochemical & Gas plants mainly in operation of centrifugal compressors (cooper, kobelco & Elliott),reciprocating compressors ( IR ,SULZUR & Burckhardt ) ,all type of pumps (mainl

13 years in quantity surveying

18+ years automotive mechanics,11+years powder metal industry blending heatreat operations etc.

Rotating equipment / mechanical maintenance technician / Commissioning technician

Experienced, results oriented, safety minded manager

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 [ 38 ] 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out