Resume - NACE Corrosion Specialist, Chemical/Mechanical/Consultant , Corrosion Engineer

Misco Jobs

Resume #87453

CONTACT INFORMATION:
View contact information...

Summary

Global Corrosion Engineer/Chemical/Mechanical consultant manager, with 30 years of broad quality oversight for major process capital equipment, field mechanical integrity reports, DOT chemical shipping classification, electrochemical analyses and R& D process engineering compatibility issues. Working knowledge of API, ASME, and NACE engineering codes. Well trained in leading failure investigations, extending the life of chemical processes, establishing new purchasing engineering standards and eliminating the effects of costly corrosive agents thereby improving processes and savings millions of dollars. Experienced in dealing with hundreds of different corrosive liquids and gases.

* Saved Hercules $ 6.7 MM over 3 years through improvements in materials handling, rotating equipment design, and dryer construction changes.

* Saved $ 32 MM over the last 10 years through projects this extended the life of capital equipment, eliminating costly field process failures, and by improving product quality for both Colgate Palmolive and Hercules.

* Certified by NACE International &CESB as a Corrosion Specialist, Materials Selection Design Specialist and Sr. Corrosion Technologist.

Professional Experience

Sr. Staff Engineer at Hercules Inc. July 2006 – July 31, 2009 (3 years 1 month)

* Saved $ 1.2 MM through the alteration of materials handling of cutter blades which eliminated compound fretting fatigue. This project reduced the chance of catastrophic failure of a cutters by practically 100%

* Conducted failure analysis of critical processing mixer leading to redesign by engineering vendor eliminating blade tip fatigue and process shutdowns saving $ 2.0 MM.

* Led international team in the investigation of two failed coiled serpentine heat exchanger dryers to determine the root cause of the failures. Dimensional modifications were made to one dryer while the other needed an upgrade in materials of construction and welding procedures at a cost savings of $ 2.5 MM.

* Extended the life of critical Kymene reactors to allow for continued operation without replacement saving $ 1.0 MM.

* Revised corporate engineering standards to bring them up to date including, FRP composite construction, Coatings and Linings as well as revision of welding methodology specifications.

* Managed corrosion lab studies and interpreted compatibility parameters for R&D and field engineers.

* Crafted materials engineering specifications for sales organization.

Sr. Engineer Colgate Palmolive Co. November 1984 – November 2004

* New formulated super fatted soap dryers developed pitting corrosion after 3 years of service. A failure analysis and several plant inspections were conducted. Recommended higher throughput velocities and materials of construction upgrade from 316 SS to Al6XN saving $ 2 MM.

* Spray detergent towers around the globe were experiencing pernicious internal corrosion Made several trips to South America to internally inspect the towers. The towers were experiencing condensation corrosion at the explosion door level mid way up. Made recommendations to shore up tower with new internal fillet welded carbon steel plate and additional insulation to prevent continued condensation corrosion saving over $ 5 MM worldwide.

* Inspection of Glycerin recovery evaporators in Brazil revealed stress corrosion cracking after 5 years of service requiring a change in material of construction. Recommendation was made to change metallurgy to 2205 duplex alloy. The evaporators were repaired with this alloy with no further corrosion issues around the globe saving $ 7 MM

* High Speed Rotary valves in abrasive toothpaste formulas were experiencing erosion pitting corrosion around the world. Made recommendation to machine new valve out of Nitronic 60 alloy. This resolved the erosion issue and eliminated the chance for metal contamination in toothpaste saving $ 2 MM worldwide.

* Resolved a Dual laminate FRP tank failed in hypochlorite service in Europe. Moved away from lined FRP to cross-linked HDPE saving $ 1 MM.

* Led a global team of packaging engineers and scientists in resolving critical Soft-soap Pump Springs crevice corrosion by testing and reformulation eliminating the issue with a worldwide saving to the business of $ 10 MM.

* Developed an eight-hour informative Corrosion course on engineering materials and chemistry. An overview of significant company corrosion issues and solutions was given. It included sections on materials selection, engineering design, corrosion testing and a how to checklist for plant corrosion inspections.

* Developed a Materials Engineering corrosion database that was used extensively by engineers and the manufacturing plants to select materials of construction for Colgate Palmolive co. saving $ 5 MM worldwide.

FMC- Metallurgical Corrosion Engineer 1981-1984

Failure analysis of machine parts and corrosion studies for FMC that included fractography, metalography, and corrosion testing. Work centered on aluminum alloy selection for the Army fighting vehicles including the Bradley.

EDUCATION/PROFESSIONAL DEVELOPMENT

Wayne State University, Detroit, Michigan. BS Material Science& Engineering, Chemistry Minor. Completed numerous ASM and NACE professional development courses. Completed UCLA extension course on Electrochemistry and uses for corrosion testing. Failure Analysis courses were taken and completed through the Society of Professional Advancement. Participated in NACE annual corrosion society meetings and section meetings for over 25 years while obtaining all NACE certifications.

OBJECTIVE:
------------
Looking for a varied assignment corrosion engineering job. Looking after mechanical integrity, corrosion control, failure analysis, chemical inhibition and monitoring, project engineering work.
------------

ADDITIONAL INFORMATION:
------------
U.S. citizen, enjoy golf, swimming, traveling, and reading.
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5501 to 5550 of 15341)

Go to Search Parameters...

Brief Description

20 years of construction and equipment operator and house and equipment repair

I'm BSc mechanical engineer and having over ten years of experience in the field of operation and maintenance.

Expert in presplit blasting techniques. valid UAEand Oman Blasting License.Experince of 2500 BLASTS. Worked with multinational companies.

Occupational Health And Safety Professional, Post Graduate Cert. In OHS&E Management

Dragline Operator with 23+ years in the Bowen Basin

Jounyman Heavy Equipment Mechanic

NACE Corrosion Specialist, Chemical/Mechanical/Consultant , Corrosion Engineer

A dynamic, Mechanical Design/Process Engineer offering over 20 years of outstanding experience in Machine/Tool Design and Project Management. Successful problem solving skills with the talent to transform complex design criteria into simple design solutions.

Looking for growth

I am a Senior Designer in offshore structures having more than 19 (nineteen) years of experience in my field. I am having hands on experience in checking of all offshore structural drawings viZ, Jackets, horizontal and vertical framings, decking etc.

Have one year job experience as a Ship design and Ms. degree in Naval Architecture subject .

Electrician Technician

Roustabout and floor man For roustabout duty cleaning and mixing on hopper and assist floor men derrick man and assistant driller.

Oil field experience in a variety of areas, Supervising drill crews.

I am young and dynamic, with Bachelor and Master degree in computer science. If I get an opportunity to serve in your reputed organization

PATRAN-NASTRAN, SACS 5.1 & 5.2, STAAD V8i, SESAM(GENIE) NAUTICUS, AUTOCAD, MS-WORD, MS-EXCEL, MS POWERPOINT, WINDOWS-XP, 2000, 98

bachelor of engineering (mechanical)

welding by an electric arch and welding by gas.The experience of work over 10 years.

Instrument Engineer (KNPC- Kuwait National Petroleum Company)

Direct and supervise work of subordinate members of surveying parties.

Piping Designer/Construction Manager

Turnover engineer skill gained through varied qualifications and experiences in the field of Commissioning and HSE.

Slick line Operator , QHSE Trainer , Crane Operator

Piping Design Enginee,PDMS,PDS

I can work any where on a drilling rig, Driller,Derricks,Motors,Floors ect.

B.E. (Instrumentation technology) from Visveswaraiah Technological University, Belgaum, Karnataka. Diploma in “Total Quality Management” course from NILEM

A highly motivated and dynamic Civil engineer with 10 years of experience in designing commercial and industrial structures. I am looking for a position of Civil Engineer/ Design Engineer in an organization where my experience and knowledge can be used to the best.

Have more than 10 years working i construction firm in Singapore as a M&E trades

Over ten years hands -on experience in XRF spectrometry in cement and steel industry

HVAC Field Service,BAS,DDC

QUANTITY SURVEYOR

I believe that my key qualities are my excellent interpersonal skills and strong communicative ability, combined with my talent for effective organisation and prioritisation.

Make a Job Safety Analysis and Standart Operational Procedure and Permit Works.

work in Saudi Arabia Israel Dubai Oman Lubia South Africa

14 years experience combined as a mill operator and mill supervisor

Seismic Interpretation - SMT Kingdom (2 years), Landmark (occasional), mapping and gridding - Petrosys. Microsoft Office (all areas).

Mining Engineer with 5 years mining experience

Professional Experience Mainly related to Industrial and Oil Jobs

Piping Layouts, AutoCad and PDMS

MBA in SCM, Excellent Command in MS Office.

I am looking for the opportunity to utilize all of my skills as a safety specialist- occupationally and behaviorally and HSE safety trainer. I am very interested in the global possibility in my field. I have 11 years experience in the petroleum industry and 8 of those years involved in HSET.

Electrical Engineer 10 years of experience in Projects in Oil& Gas,Refineries,Fertilizers,High Rise Buildings

EIT

Diesel mechanic, hardworking and 11 years experience

I am a mainer engineer working with bp shipping, uk and wishing to shift my career to shore based job

5 yrs experience in Piping & stress analysis

Columbia MBA with Research and Journalism Background

I am an Instrumentation & Controls Engineer and have almost 2 years of experience in the Oil & Gas Engineering and Services field. I have a Masters degree in Communication Systems (Electrical Engg). As an Instrumentation Engr, i was responsible for Engineering Design and Specifications.

Engineering technician

5 years working experiance as a QA/QC Engineer

First Prev 101 102 103 104 105 106 107 108 109 110 [ 111 ] 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out