Resume - Plant construction field that utilize my experience, skills and education, Contr...

Misco Jobs

Resume #87475

CONTACT INFORMATION:
View contact information...

Painting & Insulation Engineer

3 years in India and 12 years in State of Kuwait, and 1year in Saudi Arabia, Plant construction field that utilize my experience, skills and education, Contribute to growth of the Corrosion preventive coatings, Industrial Hot and Cold Insulation onshore, offshore,Petro chemical plants, oil refinery, power plants and commercial projects.
Strong knowledge:- Inspection & Test Plan, Quality Control procedure, and Construction, of Industrial Coatings, and linings. Industrial Hot and Cold Insulation, and Internal Hot & Cold Rubber linings, Water proofing systems, Steel structure Fire proofing and Marine Coatings, Interior and exterior Decorative Paints. Concrete surfaces and Coating systems.

Strong knowledge of International Coatings & Lining Standards
* Steel Structure Painting Council ( SSPC ) Good Painting practice, Steel structure Painting volume.
* National Association of Corrosion Engineers ( NACE ) Surface preparation, application, and inspection standards.
* American Standards for Testing of Materials (ASTM) Material Standards for Industrial Hot and Cold Insulation for Piping and Equipment.
* PIP – Process Industry Practice for Insulation standards.
* Oil Company"s Material Association ( OCMA )
* B. Gas ( British Standards for Painting, and Methods of Inspection.)
* Qatar Petroleum Technical specification for Painting and Wrapping of metal surfaces. (New Construction and Maintenance)
* Bharath Petroleum Corporation ( standards for Coatings & Linings)
* ONGC Oil and Natural Gas Corporation of India ltd. Specification and Coatings.
* VAISAI EAST Development Project ONGC Ltd. Specification for protective coatings and cathodic protection systems.
* Aker maritime Oil and Gas Technology UK. Pls.
* American Water Works Association ( AWWA ) Protective Coatings for Portable and Drinking water Lines and Tanks.
* Kuwait National Petroleum Corporation (KNPC) Coating Procedures & Inspection.
* Kuwait Oil Company Coatings and specification
* Bechtel France Coating Procedure (Reliance Petrochemicals India Ltd.) Painting and Insulation procedures.
* SHELL international exploration and production B.V. ( Pearl GTL Project) Specification for protective coatings and Insulation.
* Saudi Aramco Coating Procedure (paints, Coatings and Linings) Inspection standards.
* Sabic Coating and Inspection Standards
* Arabian Petro Chemical Company (PETROKEMYA) Engineering specification for painting and Insulation
Technical Experience in India and Abroad, around 15 years in the field of "Coatings,
Linings, Industrial Hot & Cold Insulation,
* In India 3.5 Years worked at (MIL) Madras Industrial Lining as lining Supervisor, from 1993 to 1997 March.
* In State of Kuwait 12 Years at Various Contractors and in Different projects, worked as Site supervisor, Site in-charge and projects Engineer, from 1997 June to 2008 August.

EQUIPMENT SKILLS.
Various abrasive Blasting methods depends upon the original surface conditions as well as the type of abrasive, blasting equipment, size, hardness, type, and abrasive shape. Inspection of Surface prior to and after blasting.
* Wet blasting, Low pressure water + abrasive injection, Steam blasting
* Dry grit, mineral, steel shot, copper slag, blasting methods
* Needle gunning, Flame cleaning, Chemical cleaning such as pickling.
* Fireproofing and mixing methods.
* Insulation – Cladding and fittings.

Operation Knowledge with Blasting and Painting Equipment
* Plural component Spray system, Air assisted Airless Spray, Conventional Spray, Roller and Brush application. Various Decorative hand tool applications.
* Blasting Pot & Compressor (complete set) and Auto Blast system.
INSPECTION SKILLS
Inspection and Test of surface prior to and after blasting &Coating.
* Weather conditions, Air, Relative humidity, Dew point Temperatures
* DFT and WFT Gauge
* Digital and Magnetic Thermometer
* Dust tape kit, Pencil Hardness Tester, Dolly Test for Hardness
* High Frequency Holiday Detector
* Pencil Hardness Tester, Dolly Test for Hardness
* Standard Anchor Profiles, Surface profile (Testex replica tape Test)
* Soluble Salts Test on Steel Surface (Sulfate, Chloride, and Nitrate Tests) Potassium Ferricyanide Test, Copper Sulfate test.
* Fireproofing and insulation Test methods
* Calibration of Instrument and Control.

Inspection and Test methods for Insulation Hot, Cold and Acoustic
* Study drawings, project specifications, quality plans, procedures, purchase orders etc. and understand the requirements of thermal insulation.
* Conduct inspections of Thermal Insulation, materials, mastic and sealants, insulations and received are as per the customer specification, necessary certificate and documents are received and complied with the project specification.
* Check the materials for the appropriate brand, size, thickness, physical condition including packing etc. at the time of receipt.
* Conduct inspection and testing at specified stages of installation of installation of insulation and record the results in the inspection report form.
* Check weather appropriate materials, right size, thickness and quantity in accordance with the approved QCP & ITP are applied.
* Liaison with client and their representatives for witnessing or surveillance of inspection points during installation.
* Advise installation supervisors and technicians on preventing potential quality problems
* Make sure that inspection and monitoring devices if any used for inspection are calibrated and controlled.
* Conduct final inspection of the installed insulation in accordance with the ITP / QCP/ customer drawings and offer the same for the customer inspection.
* Identify nonconformance, documents and report it to project manager
* Supervise rework or repair if any carried out on the insulation and carry out re-inspection.
* Prepare the inspection reports in the prescribed inspection report form and obtain customer approval.

SPECIAL SKILLS
Excellent Field and Shop Working knowledge about, Different types of Coatings, Product, various application methods, and Quality Control,
* Blast cleaning, Number of Coats, Wet and Dry film thickness, Holiday detection (high and low voltage). Volume solids, viscosity, surface drying time, Temperature, Hard drying time, sag resistance, Flash point, Percentage of Gloss (finish coat), Mixing ratios (2pk) by weight and volume, Pot life, Shelf life stability.
* Corrosion preventive Generic Coatings such as Silicates, Polyamide epoxy
* Generic Coating System, High heat Induced polymerization coatings, Silicone Epoxy coatings. Organic, inorganic Zinc Rich Coatings
* Solvent Free High Build Epoxy Coatings, Chlorinated Rubber Coatings
* Sacrificial Cathodic Protection Coatings, Principles of Cathodic Protection and Cathodic protection of Buried pipe lines Cathodic protection requirements for Marine facilities and procedure for using tools and operating systems.
* Two pack Epoxy and Polyurethane Coatings, Alkyd, and Emulsion Coatings
* Powder Coatings ( U/G FBE Coating for external surfaces).
* Corrosion on stainless steel, under insulation to prevent chloride instigated, coating system for Internal and External Piping and Steel Structure. Applied during construction, Maintenance and Repair work.
system for Internal and External surfaces of Diesel, Portable water and Sea water storage tanks Applied during construction and Maintenance and Repair work.
* Coating systems for submerged zone primary and secondary structural steel with Anti – fouling system.
* Coating system for Structural steel within the splash zone. Coating systems for atmospheric zone.
* Coating systems for top side offshore facilities, Aluminum Helideck onshore new construction. Structural inspection of offshore facilities, Effect of Surface Contaminants
* Identification and supervise the upstream and downstream equipment, verification of corrosion control by use of chemical treating
* Surface profile for Anticorrosion paints, Standardization of wash water quality
* Hot Dip Galvanizing system and Field repair procedure
* Stainless Steel and Cleaning Technology, Performance test of Marine Coatings.
* Typical defects, weld defects, iron contamination, rough surface, organic contamination., Mechanical and Chemical methods of surface Cleaning
* RTRP Reinforced Thermosetting Resin Pipe Lamination for Joints.
* External Neoprene coating for Risers and J-Tubes.
* Max Mayer Italian paints and wood varnishes, Decorative Paints, Interior and Exterior wall finishes, Wood Sealers & Polyurethane Lacquers
* Enviroline Thick Coatings and linings (USA)
* United Coatings USA.( Reservoir water proof Coatings) Concrete Sealers and Reservoir Internal water Proof Coatings
* Marine Paints, Coating system-anti-fouling, and inspection procedure
* Rema tip top Rubber Linings, and Steam Curing methods ( Hot and Cold procedure)
* Industrial Self level Epoxy Flooring systems
* Coal Tar Epoxy Coatings, Liquid and Hard Membrane Water Proofing's
* Under Ground PE Coating and Line Field joint wrapping procedure.
* Glass Flake and Permaline Tank internal, Quick Drying High Build Epoxy Coatings.
* Steel Structure / Pipe / Pipe support, Hot Dip Galvanizing and Coatings

* Shrink fit sleeves for pipe joints and small diameter pipes
* Polyethylene Tape wrapping system for spool weld Joints and re
* Protection of Non Ferrous Metals
* Surface preparation, coatings, and inspection of Concrete surfaces.
* Fire proofing, Cementatious and Intumation.
* Industrial Hot and Cold Insulation. Process Industry Practice requirements for Cold and Hot insulation materials and insulation systems

CAREER EXPERIENCE

Experience & working Projects

Organization: MIL (madras industrial Lining) Engineering Enterprises. India.
Period: 1993 – 1997 March.
Designation: Field Supervisor. ( Rubber lining & Coatings )

Duties and Responsibilities, In the above working period in maintenance of Chennai petroleum Facilities, Rubber lining (soft, semi hard, synthetic, lining and curing systems) for storage tanks, Pipeline internal external coatings, maintenance of water tube Boilers, economizer, air pre-heaters, soot blowers, Cooling towers, Refinery furnaces, and Maintenance in various plants associated with M/s Chennai Petroleum corporation Ltd.

Organization: - Ghaida Al-Kuwait Gen. Trad. Co.
Period: 1997 to 2000 February.
Designation: Project Supervisor.
* Kuwait Oil Company (KOC), Worked as Painting Supervisor with Sub contractor, Ghaida Al-Kuwiat General Trading & Co. Specialized Coating Services. For a period of 2.5 years, 1997 – 1999.
* Under KOC GC (Gathering Centers) Pipe Line Internal Lining and External Coating. Steel Structure Epoxy Coating Prior to Fire proofing works.
Project Scope and Work
* Internal lining and external coating for Sea water Pipe lines
* Epoxy Coating and Fire proofing for Steel Structure.
* Oil Storage Tanks internal Glass Flake Coating & External
Three coat system. With Color code band, Service Identification Mark.
* Rubber lining for Chemical storage tank and pipe lines.

Responsibility:-
* Coordination with Contractor and Clint
* Documentation, Site Drawings Handling and Quality Control, Organizing QC Inspections and Test Plan
* Material Storage and Control, Data sheet, Batch Certificate follow ups.
* Preparation of RFI for each stage prior to blasting, cleaning, primer coat, intermediate, finish coat and Final Inspection.
* Attending Inspection as per Project Specification and recommended NACE/SSPC Standards.

Organization: - Arsaan Paints (interior and exterior Painting Contractors)
Period: - 2001 – 2004
Project: Various
Designation: - Painting Engineer
Duties and responsibilities, during the period worked in the above painting company, establish painting facilities for particular job, manpower handling, Instrument, material Control. Quality Control and Documentation is the main activity during the work. While working with this company in my supervision Commercial projects like shopping complex, ministry building and power station, maintenance works of painting and rubber lining as well as mechanical modifications are under my control and job shall be done in my supervision.
In this period of working interior and exterior paintings of decorative coatings, such as exterior texture finishes, and internal Technical handmade designs with paints are done. Wood varnish, lacquer finishes, Floor and Ceiling handmade decorations, ceiling water proofing with liquid and membrane applications are major activities In this period I got the vast experience in the field of interior and exterior Decorative Coatings and commercial water proofing works, as follows……..
* Interior technical handmade designs of water based and alkyd paintings External texture finishes like sigma, jotun decorative. Coatings and underground foundation water proofing works, Wood varnish, lacquer, and sealers. Exposed Concrete sealers, treatment of cracks, expansion joint sealers, Grout systems, Floor tiles and marbles.
* Concrete Underground Reservoir around 60,000 m2 uni-coat applied using plural component machine. Expansion joint works and surface preparation by sand blasting two coats of uni-coat water proof membrane coating.

Organization: Faisal General Trading & Con. Co.
Period: 2004 – 2005
Designation: Construction Supervisor.
In the above period of working, duties and responsibilities are over all site in charge for the painting projects. Main activities of the company industrial and marine coatings. During the project work we handle one cargo vessel from transocean marine paints, the contract is inspection and monitoring material and documentation within a limited period. Project is successfully finished in 21 days, at Kuwait ship - yard.
* High pressure water jetting and Sand blasting up to near white metal
* Repairing damaged metal, Primer and mid coat application within the interval timings as per manufacturer recommendations.
* Top coat at the line of boot top, Anti-fouling for boot top.

Project successfully finished in 21 days. (day and night shift) as per client requirements.

Organization: M. A. Khorafi and Partners Co.
Period: 2005 – 2006 June.
Designation: Painting Engineer
Project: Shaik Jaber International Stadium. ( Prestigious Project)
: Exposed Concrete Structure ( 1,60,000 m2 ) Sealer Coating
: Under Seat Bleaching Area Fosrock Three coat system(60,000m2)
: Plant room, underground rest rooms Dust proof coating(19000m2)
Total 1,60,000 m2 of United Coatings Sealer ( beige) applied in various stages, using by tower crane, man lift, sky climber, instant access mobile scaffolding etc. Stadium structure is in 45⁰ critical areas are coated with man lift and sky climbers. Project finished successfully in 1.2 years, without any incidents. This Project will be a great achievement in my career.

Organization: 3B General Trading & Co.
Period: 2006 - 2008
Designation: Insulation & Painting Supervisor
1. Project: Aromatics Project
Main Contractor: SK ENGINEERING & CONSTRUCTION CO.
Consultant: Bechtel
Clint: KPPC (Kuwait Peraxoline Production company)

2. Project: Olefins II, Marine terminal Project (Off-Shore)
Main Contractor: Hyundai Engineering & Constructions
Clint: Ahmadi Port, State of Kuwait
Designation: QC Inspector ( Insulation works )

Duties and responsibilities for the above projects, handling quality control and inspection for project insulation works and 32 No's heavy rigging Equipment insulation and Erection works. Aromatics project heavies column 69 meters total height, HC insulation and aluminum jacketing works done in 18 days ( day and night shift )
With Hyundai, marine terminal pipe line insulation (off shore facilities) around 7 kilo meters of 10 – 24 inch diameter hot and cold insulation systems as per client and specification requirement.

DATE OF BIRTH & AGE……………………… 24TH MAY 1969. (40YEARS)
NATIONALITY………………………………….. INDIAN
STATE………………………..………………… ANDHRA PRADESH
MARITAL STATUS……………………………. MARRIED
EDUCATIONAL QUALIFICATION………… UNIVERSITY DEGREE 1989
DIPLOMA IN FINE ARTS ( PAINTINGS)
DIPLOMA IN COMPUTER APPLICATION.

LANGUAGES SPEEK, WRITE, & READ…… HINDI, ENGLISH, ARABIC, TAMIL, TELUGU,

Therefore, I hereby agree to:
1. Give first consideration for coating construction, and inspection work to safety and public welfare.
2. Apply myself with diligence and responsibility to my work.
3. Pursue my work with fairness, honesty, integrity, and courtesy. ever mindful of the best interests of the public, my employer and my fellow workers.
4. Not represent myself to be proficient or make recommendations concerning coatings related work for which I am not qualified by knowledge and experience.
5. Avoid and discourage untrue, sensational, exaggerated, or unwarranted statements regarding my work.
6. Treat as confidential my knowledge of the business affairs or technical processes of clients, employers, or customers.
7. Inform clients or employers of any affiliations, interests, or connections which might influence my judgment.
8. Accept no money gratuities of any kind nor other gratuities whose value could cause a question as to whether they may have influenced my inspection activities, decisions, or reports.
9: Be fair, reasonable, and objective in my work, not allowing myself to be influenced by personalities or other individual considerations.
10. Completely, accurately, and honestly fulfill the reporting requirements of the specifications for any coating operation I may be responsible for inspecting.
11. Take it upon myself to determine from my superiors the scope of my authority and work within it.
12. Ensure, to the best of my ability, that the terms, and requirements of the coating specification are clearly understood and agreed to by all parties involved.
13. Strive to obtain the best possible results under given conditions with a given coating specification:

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5401 to 5450 of 15498)

Go to Search Parameters...

Brief Description

Manager, design systems, HSE mechanical service

Mechanical Engineering Graduate with seven (7) years experience in supervision of the operation and maintenance of furnace, compressors, cranes, pumps, boilers, expellers, oil heaters, water supply and water treatment. Four (4) years experience as Maintenance Supervisor in a 62-hectare Prawn Farm

Bachelor Mech Engg, FEED preparation and review, preparing PMS, piping standards and specifications, developing plot plan, piping layout and isometrics review, piping MTO, MR/PR, bid evaluation, dwg approval, stress analysis using CAESAR-II, Tender inputs for construction

I graduated with a second class upper division in Chemical Engineering from LAUTECH, Nigeria and a holder of MS Petroleum Engineering from UI, Nigeria. I have beeing Working as a research assistance since 2006 with an experience in Paints industry.

outdoor field technician

computer literate, analytical skills, high initiative , tool testing ang geological evaluation

Designer, Drafter

I am highly organized and a very proactive person, i pay attention to details, i am caring, visionary and inspiring to learn from. I enjoy working in a team.

Experienced Landman/Attorney

Well Experienced as Production Operators

Carry our inspection activities on static equipment as per specified inspection test plan or inspection work list given by client in accordance mentioned codes and standards

Experienced Mechanical Designer. Over twelve years drafting experience with ten years of design experience designing automated and semi-automated assembly machines for the automotive powertrain industry.

MCSE, CCNA, ITIL,System Administrator, Windows Server 2003,2008, MS Exchange Server 2003, 2007, ISA Server, SharePoint,

In depth knowledge of Occupational Health and Safety Act and Mining Regulations. 15 years open pit mining experience. Qualified trainer in majority of all current open pit equipment. Extensive experience dealing with government organizations such as MASHA, MOL, MLRC, etc

Graduate Mechanical Engineer with expertise in Design of Process plant equipment like pressure vessel, columns, reactors, tanks, skids etc. having expereince more than 6 years,.

I have been the oil and gas industry for the last 15 years, I have just recently became a Wellsite Supervisor, I have all the needed tickets to work in the industry, Along with being a Wellsite Supervisor I have been a Rig Manager for 7 years, Both on mobile singles and mobile double service rigs.

DCS Operation of 2400MW Plant, Steam Turbine, Oil and Gas Firing Boilers, 100 MIGPD Desalination Unit Operation

12 years customer service as a technician.

I have been working in the oil field for approximately 14 years of which I have primarily operated in the cementing field however, I have also spent some time in the QHSE field where I was part of a team that implemented both the ISO 9001-2000 Quality Standard and HSE Management Program.

Passed professional architectural licensure exam- 16th place, Graduated College with Latin Honors (Cum Laude), graduated high school and elementary with honors, proficient with autocad and microstation.

Oil and Gas Senior Operator

A highly gifted and enthusiastic geoscientist with experience in field work, identifying sedimentary facies from core material and well logs, diagenesis in siliciclastic rocks, sequence stratigraphy and stratigraphic correlations and conducting geological surveys

Equip Operator or Truck Driver /Over 15 years experience operating equipment in mining and construction/Trained in mine rescue procedures thru Ministry of Energy & Mines/ Accident free record for equip operations/ adapt quickly in adverse conditions/ work safely & productively

layout ,project management,model review

EDUCATION: Bachelor of Engineering in Mechanical from Govt. Engineering College, Jabalpur, India in April 1984 Diploma in Personnel Management from Indian Institute of Management Studies, New Delhi, India in 1987

Plant construction field that utilize my experience, skills and education, Contribute to growth of the Corrosion preventive coatings, Industrial Hot and Cold Insulation onshore, offshore,Petro chemical plants, oil refinery, power plants and commercial projects

15-years Professional Experience in Contract Department (QS), Planning & Scheduling, Construction & Testing, Oil & Gas Fields, Fertilizer & PTA

I have had acquired a sound knowledge of engineering principles with emphasis on designing and exposure of mechanical equipment and piping system installation. In addition, I have excellent knowledge in codes and standards such as asme, astm and api. Expertise includes,To attend and witness any test

GIS Consulting, Spatial database, image processing, natural resource management, remote sensing, AVL, GPS, spatial multimedia, ground water modelling, foundation engineering

B.Sc. Degree, WellView, DIMS, Drilling and Drilling Fluids Programming, strong computer skills in VB and Office

I have 12 years experience on design and manufacturing industries. Moreover I completed 4 design courses (Stress Analysis, Finite Element Analysis, Structural design, Computer Aided Mechanical Design) and 5 manufacturing (Manufacturing of Composites, Mechanical forming and shaping of metals)

Sales and marketing experience in consimer and industrial products 11 years experiences and 6months SAP-SD functional module experince as fresh.

i am d.p.singh, working as a operator in indian oil corporation ltd at panipat refinery, and having 12 years experiences.

To be employed directly by a Company that provides training, employment stability,. competitive compensation and Visible Rewards in Exchange for dedication, Commitment and Performance.

- Managing Personnel - Financial Forecasting - Financial Modeling - Financial Analysis - Financial Reporting - Budgeting - Variance Analysis - Government Reporting - Develop Standard Costs- General Ledger - A/P, A/R, Payroll - Inventory, Cash

Included in this resume are details of my experience on gas pipelines. I have welding inspection qualifications and have experience of NDT techniques which are used in the pipeline industry. I also have experience of construction on gas pipelines while working for Transco.

* Over 4 years of reservoir engineering experience in USA and Canada * 8 years of petroleum engineering/well completion experience in China * Expertise in using BOAST 98, SGM, ECLIPSE and IMEX

A detailed, oriented, dependable and organized individual with progressive responsibilities within the Environmental, Health and Safety Field with Hand- on Field and Laboratory Experiences. Resourceful in achieving tasks accurately, timely and neatly. Enjoys accepting and handling new challenges.

Results oriented, highly focused professional offering over 14 years of experience in oil & gas research with strong working knowledge of lease terms and provisions. Proven team leader committed to reaching company objectives

A. CIVIL STATUS DATAS

Am a chemical Engineering Graduate with 6 months work experience at Kaduna Refining & Petrochemical Company. A Safety expert & a plant operator. posses good team spirit & can work under pressure.

Engineer for Power System Analysis, SCADA/EMS chief engineer

More then 25 years in maintenance

I have more than 11 years of experience in petroleum and water testing in laboratory.

repairing,overhaulilng,diagnosing,servicing and troubleshooting of heavy duty machines,and other equipment.

EXPERICNE SALES AND PURCHASING

Over 23 years of rich experience in Technical Training, Erection & Commissioning, Production Planning and control,Safety,Environment,Health, and Quality in the fertilizer industry and Petrochemical industry seek suitable new assignments in Training and Development in Fertiliser,Petroleum,Petroche

Chemical engineer with storngpetrochemical operational background,strong analytical ability,rich experience of percommisioning,commisioning ans startup of plant,was involved in major debottlenecking of the plant

Registered Professional Engineer with 13 years experience in mineral processing and extractive metallurgy. Holder of a B.S. in Metallurgical Engineering and a M.S. in Environmental Science.

Major expertise are as follows Stress analysis in CAESAR-II software for static and dynamic load cases (viz. Static, Wind, Modal, Analogue, Safety relief, Slug flow and Seismic Analysis). Engineering of pipe support including spring hangers.

First Prev 101 102 103 104 105 106 107 108 [ 109 ] 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out