Resume - +30 Years experiance as Mining Engineer, and Metallurgist

Misco Jobs

Resume #87637

CONTACT INFORMATION:
View contact information...

Education:
B.S. Mining Engineering Montana Tech. Butte Mt.1980
B.S. Mineral Processing Engineering Montana Tech Butte Mt 1980
Licensed E. M. T. Nevada 1988
M. S. H. A. Training Instructor Dept. Labor Birmingham AL 1999
DTH Drill Basic training Atlas Copco Roanoke, Virginia 2008

Experience:
Drilling and Blasting Systems 1695 old Covington Rd NE Conyers, GA From: 8-92 to 9-2008
Title: Driller, Drill Tech., Safety Trainer, Safety supervisor, Field Supervisor, Consumables Supervisor.
Duties: Drilling and Blasting Systems (DBS) is a contractor that drills Production Blast holes for quarries and mines in a four state area. I was with this company for 16 years and performed a number of duties under different titles. In chronological order:
Driller/Drill tech. operation of a truck/track drilling 6.5", 5.5", and 5" Dia. Holes We drilled primarily production holes with some exploration holes, duties included standard Maintenance of drill and company truck, quality control and Customer relations..
Safety trainer: Performing MSHA safety training, Annual refresher, new miner and task training.
Safety supervisor: included, compliance with all state and federal regulations, I wrote the Safety training program and the task training programs which were later approved by MSHA.
Field supervisor: I supervised Drillers in North Carolina maintaining safety requirements, production goals, moving drills O.T.R. and Public relations with customers.
Consumables Supervisor: Purchasing and distribution of consumables, tools, safety items, Rebuilding hammers, chucks, backheads, Fabrication of numerous products, wrenches, Bit grinding stands, fishing tools and miscellaneous tools.
Reason for leaving: Down turn in economy caused layoffs. Company began cutting corners, despite my objections, in what I felt were safety issues. This caused an incident after which I resigned.

Haily & Rast Joint Venture Roswell, GA From: 7-91 to 6-92
Title: Driller
Duties: Operating a track drill and blasting in advance of municipal storm drain construction project.
Reason for leaving: Drilling portion of project completed. Went to work for next employer, DBS.

Western States Minerals 4975 VanGordon, Wheatridge, Co 80033 From: 1-91 to 6-91
Title: Mine Planning Engineer Supervisor: Dwight Crossland
Duties: Included Evaluation of Geological, Mining, and Metallurgical work Performed and in progress on gold project. Mine planning and design utilizing Med system software. Operations Engineer for White Pine mine.
Reason for leaving: Low gold prices caused reduction in force.

Placer Dome U. S. Box 497 McDermitt Nevada 89421 From: 2-88 to 12-90
Title: Mine Engineer Supervisor: Randy Powell
Duties: Included Ore control, mine scheduling, meeting production goals, calculations of annual ore reserves using in house software, budgeting, long and short range mine planning, surveying, and road construction projects. Also I had the opportunity to become involved with the daily operations of the mill and furnace. This included experience with bench scale flotation, furnace and leaching test work for the purposes of feasibility studies.
Reason for leaving: Falling Mercury sales caused closure of mine.

Montana Talc Company 28769 Sappington Rd. Three Forks Mt 59752 From: 4-86 to 10-87
Title: Quality Control Engineer Supervisor: Bob Walish
Duties: Responsibility for product Quality. This included trouble shooting a new mill during start-up, setting the grinding conditions for dry grinding mills and trouble shooting the "ladder logic" software for a totally automated mill. I supervised the lab technicians and set up the sampling and testing programs. The lab also provided technical support for customers, Exploration Dept., Marketing, and R&D. While I was with the company Montana Talc became recognized as a quality product.
Reason for leaving: Sagging market conditions caused a reduction in staff.

Western Co. of N.A. Sidney, Montana 59270 From 1-84 to 3-85
Title: Lab Tech. And E.O. Supervisor: Ken Buhler
Duties: Conducting tests in quality control lab and driving oil service trucks.
Reason for leaving: A slump in the industry caused layoffs. I returned to college.

In Partnership developing Peterson Lode claim near Butte Mt. From: 4-83 to 9-83
Duties: Mine surveying, mapping, sampling and evaluation.
Reason for leaving: The price of silver fell from $10/oz to less than $4/oz that summer.

Dresser Magcobar, Box 6504, Houston, Texas 77005 From: 4-82 to 10-82
Title: Metallurgist II Supervisor: James T. Gullett
Duties: Mineral Processing test work on Barite ore samples using flotation, Mineral jigs, shaking tables, dense media, and Pilot plant test work.
Reason for leaving: Downturn in the oil industry caused massive layoffs.

Basic mining and underground Development From: 6-81 to 11-81
Title: Process Engineer Supervisor: John Peirce
Duties: Supervision and renovation of 75 S.T.P.D. silver flotation mill.
Reason for leaving: Mine closed due to depleted ore reserves.

Blue Range Mining Co. 1155 W. Porphyry Butte Mt. 59701 From: 4-80 to 6-81
Title: Mill Superintendant Supervisor: Larry Hoffman
Duties: Supervision and Security of 100 S.T.P.D. Gold mill utilizing mineral jigs and shaking tables, in Alaska. Design and renovation of flow circuit to remove shaking tables and replace them with flotation cells and leach of the concentrate. Carbon in Pulp final recovery.
Reason for leaving: Seasonal Employment, Unsafe work practices, Isolation.

Personal:
D.O.B. 3-23-57 S.S. 516-72-8532 U.S. Citizen Single

References:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 301 to 350 of 15478)

Go to Search Parameters...

Brief Description

+30 Years experiance as Mining Engineer, and Metallurgist

Highly skilled and experienced Sr. Drilling Engineer, experience with land/offshore (including deepwater), having worked as Drlg Engineer through Drilling Engineering Supervisor for a large scale GoM deepwater developement project.

Accomplished presence in providing EHS decision support to Top Management through strategic planning for more than 16 years.

My techanical abilities in the use of Primavera and my leadership skills may be of significant interest to you. Upon review of my qualifications I think you will find that I would be a very valuable member to your company.

Around 2 decades of functional experience in Maintenance, Repair & Overhauling of Heavy Mining & Construction Equipments such as Bulldozers, Graders, Excavators, Loaders, Rig/Drill Machines, Cranes, Tower cranes, Compacters, Crushers, Batching plants, Water Pumps, Generators, Concrete Pumps/mixer

A highly experienced & qualified, possessing extensive experience in handling any size of organization in various aspects of Finance & Administration seeking a managerial position.

Total of 20 years offshore , for just over the past 4 years I have been working as night drilling supervisor in the UK North Sea. I started my career in mud logging and moved on to being a wellsite geologist,

20 years experience in the mining maintenance field. Experience covering fitter to mechanical superintendent roles.

20 years experience in design, installation, commissioning, performance testing, client personnel training to final handover of the DCS control system for epc power station projects. Excellent working relation with design, process, control, instrument, operation and vendor system personnel.

High educated Creative leader with 18 years of experience in business and human development and multi languages speaker seeking new challenges, quality experiences and more traces

I hold Master degree in palynology and currently Phd student doing research on ordovician silurian palynology

Bachelor Degree in Electrical Engineering,Masters in Management,Having Good technical knowledge about Engg.standards such as IEC, SEC-standards, IEEE, BIS.

looking for a new experience abroad

Chartered Civil Engineer with 30 plus years' experience in project control, construction, & design of major infrastructures, including reclamation, highways, water, drainage, sewage treatment works, underground and above-ground railways. Specialised in Geotechnical Engineering.

20 years experience in drilling/work

Engineering design, offshore and onshore pipelines and facilities, Report writing DBM, FEED, PEP

I graduated from university studies, firstly Drilling and Production then MASTER (Horizontal Drilling Wells). For 2 years I worked as Engineer in Cementing Department for SC Petros SA (Romania), then for 18 years I worked as Engineer and Data Analyst in Drill Stem Testing Department.

Production chemist involved in oil & gas flow assurance, development and validation analytical operating procedures, reliability plant engineering

Working as Dy. Manager (Forestry) and associated with raw material storage management, procurement and Tissue Culture.

Hands on Metallurgist with diversified experience in copper/cobalt refining as well as Sulphuric Acid Plants. I hold a B Min Sc(Met and Min processing) with over 26 yrs experience, 16 yrs at senior level

I am a diligent person and very articulate in presentation. I have a huge experience in Business Development with PETRONAS and its PSC Contractors like Exxon Mobile, Shell, Talisman and Murphy during my stint in promoting VDP status products and services. Cheers

Working in oil and gas project for more that 15 years as a QC- Piping Inspector.

Mining manager 25 yrs of experience

B.E.(Mechanical); 22 Years total Industry Experience; Served with SABIC, Reliance, SPIC & Shell;

HSEQ Manager

Supplier management, vendor development, startegic sourcing, procurement support, procurement management

More than twenty (20) years experience in the field of Engineering Construction in

Manager of milling department woodworking division, wood lamination, sawmill manager, lumber quality checker, logs scaler.

A professional, well-qualified MECHANICAL ENGINEER with extensive project management experience in the oil refining, gas, LNG/LPG, petrochemical and associated industries.

Senior Plant Inspection Engineer. Mechanical engineering graduate with 29 years of experience in Oil/ Petrochemical industries loking after Process Plant Inspection, Materials Inspection, NDT, Corrosion, Failure Analysis, Fabrication/ Welding inspection in running plants + new grass root projects.

Cost, management, financial accountant

Geologist, Heavy Oil and Oilsands. Experienced consultant, prospect generator, horizontal well planner for thermal and CHOPS applications.

dcs operator or panel operator

Process Industries, Oil & GasOffshore & Onshore Construction, Completion, Fabrication & Installation.

I have 22 Years of experience in the Detailed Design and Engineering in the areas of Plant Design & Piping for Oil & Gas, Petrochemical, Chemical and Power Projects. I am presently working as a Head Piping.

Accomplished senior manager with over 23 years experience in Financial Accounting, business development, Auditing and system designs. Special skills in Enterprise Resource Planning ( ERP) system implementation and SAP support and Training,

Extensive experience in multidisciplinary projects for the Canadian, Mexican and Venezuelan Petroleum Industry.

With 20years O&G experience, my main experience has been on major projects during design. I have experience within Operations, Construction and Commissioning and also worked on site; offshore, pipeline construction and FPSO shipyard construction. I have Australian and British Citizenship.

35+ years as Drilling Engineer, Drilling Supervisor, and Drilling Superintendent

Diploma in Polymer Tech.:Plastic And Rubber Institute London (UK), B.Sc. (Chemistry. & Physics.) Mumbai University.

Dedicated professional in Exploration and Production with 27 years experience working for the two largest major Oil Services Companies. Strong engineering background in Drilling and Completion Fluids as well as Drilling Waste Management through years of focused operational management.. Strong engi

Drafter & Designer experience in estimation and designing of transmission lines and poles. Facilitated department meetings for administration of projects. Have worked the industry for twenty-five years and have obtained a Bachelors of Science degree in, Business Administration. Ability to prioritize

Profile: A Specialist Seismic Interpreter with over 15 years experience in Oil & Gas exploration, in seismic interpretation and prospect generation. Having the ability to supervise seismic processing and acquisition activities and take on role as a Project Manager. Confident in ability to cont

Project Manager and Senior Staff Landman and Senior Right of Way Agent

Experienc in the development and management of new mines and existing operations.

Technical English instructor in oil and gas industry, rotational and residential; ESP, ESL and General English in a variety of countries; administrative/management experience as well as technical writing/translation and course writing; BA, MA and TESL cerified

Purchasing/Contract Administration career includes experience in oil & gas, subsea, petrochemicals and drilling. It also includes large and small projects and many years in chemical/refinery enviroment. My Motto: Whatever it takes to get the job done.

Over 31 years of extensive professional experience in various Highway/Road Construction projects in Bangladesh, Ethiopia, U.A.E., Yemen and Laos. Experienced in Geometric and Structural Design of road pavements. Experienced in Execution, Supervision Consultancy and Design of roads including bridges,

Working with Transocean as a Drilling Manager in Integrated services Project started for 5 Jack up rig for Bombay High field with client -ONGC. Operation commence in Jan 2007.

Drilling Engineer offshore tender rigs jackups onshore land rigs

First 1 2 3 4 5 6 [ 7 ] 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out