Resume - DCS AUTOMATION SYSTEM DESIGN ENGINEER

Misco Jobs

Resume #87643

CONTACT INFORMATION:
View contact information...

EXPERIENCE 2 Years 2 months

Engineer, Alstom Projects India Ltd. July 2007-Sept 2009.

CORE COMPETENCIES:
* Presently Hands on experience in Alstom's ALSPA P320 DCS system.
* Design and testing of Close loop and Open loop controls in Water Steam Cycle area using ALSPA P320 system.
* Designing and testing of HRSG Sequencer, Unit Master Sequencer & AGC logics.
* Design of Logic/Process Function Plans (PFUP) with the help of CONTROCAD tool.
* Designing of Dynamic Objects & Mimics and uploading them into Centralog
* Complete HMI Engineering.
* HMI database management.

PROJECTS UNDERTAKEN

1. MUARA TAWAR 5(INDONESIA) Duration: Jan'09 –Sept'09

The MUARA TAWAR 5 consists of a Gas Turbine, a water cooled Generator for the GT, a two casing Steam Turbine, a water cooled Generator for the ST and all auxiliaries to operate plant. The Gross power output of the plant is 242.5 MW with a gross Heat Rate of 6758.3 kJ/kWh.

Key responsibilities:
Implementation and testing of the Water Steam Cycle open loop and closed loop systems like Feed Water tank Temperature Control, Feed Water Tank Level Control, Condensate Level Control, HP/LP Feed Water Pump System, HP/LP Turbine By-Pass, Fuel Gas preheater System, Air Removal System, Clean Drain System etc. in ControCAD.

2. CSS-F GCOM, CSA ATLANTIC PROJECT Duration: Nov'08 to Dec'08

The CSS-F GCOM is from the gateway designed to interface the P320 system with the ABB Gas turbine control system Egatrol. The CSS-F Gcom gateway enables the P320 to receive digital points and analog measurements From the ABB systems, including time-tagged events, and to transmit digital commands and set point commands to the ABB systems. The project was the first in its kind because it focused on minimum communication with the ABB control system Egatrol.
Role:
Undergone 3 weeks of on job training in ABB Baden (Switzerland) on CSS-F GCOM HMI Engineering along with External FAT.

Responsibilities:
* Designing of Dynamic objects considering Inputs coming from ABB ADVANT EGATROL System through GCOM.
* Designing of truth tables and full HMI Engineering based on Inputs coming from ABB ADVANT EGATROL System through GCOM and the commands going from ASPA to ABB ADVANT.
* Testing of the created ALSPA Dynamic Objects with ABB ADVANT.
* Updating GCOM signal list of controlled objects.
* Loading of CSS-F with ALSPA.
* Preparation for External FAT and completion of Successful FAT with customer in ABB Baden (Switzerland).

3. GTX COGENERATION PROJECT Duration: Dec'07 to Oct'08

The GTX Cogeneration project is an ALSTOM Turnkey Combined Cycle based on one GT 13E2 Gas Turbines, one Heat Recovery and Steam Generator (HRSG) and associated interconnection with existing steam network of Condor(CCP16,18), Kestrel(CCP 20) and desalination plant. The global power output will be of 146,48 MW.

Role:
HMI (DB) and Graphics part of the project. Implementation and testing of Automatic Generation control, HRSG Sequencer and Unit Master Sequencer.

DCS Responsibilities
* Creation of Logics and Testing of HRSG Sequencer, Automatic Generation Control & Unit Master Sequencer.
* Implementation of Logic in the ControCAD according to Process Functional Plans (PFuPs).
* Creation of Mimics (graphics) from P&ID using Controcad and uploading them to Centralog.
* Views creation (mimics, extended & windows) in View tree, creation and implementation of static and dynamic drawings.
* Version instrumentation, trouble shooting and subsequent loading of views in Centralog.
* Creation of GT Interface Variable list with Egatrol system (ABB GT Automation System).
* Designing of GTX, Kestrel and Condor Network Termination Details using AutoCAD.
* Creation of Common Mimics (Mimics common for all three plants GTX, KESTREL, CONDOR).
* Documentation of HMI Logs, Graphs and MIMICS.
* Creation of input/output variables in the ControCAD as well as in I/O Management file according to the I/O list and updating I/O list with new variables if required Involved in Preparation of Mimics using CENTRALOG HMI tool.
* Modification in the existing Mimics of Kestrel and Condor due to GTX extension.
* Preparation for External FAT (Factory Acceptance Test) in Massy (France).

4. CONDOR UPGRADATION PROJECT Duration: Oct'07 to Oct'08

The CONDOR Upgradation Project is an ALSTOM Turnkey combined cycle based on four Gas Turbine, four HRSG and two Stream Turbine. The global power output will be of 14,648 MW.
Role:
To Upgrade HMI, Graphics and create document for HMI with reference of ALSPA P320 Series4 to ALSPA P320 Series5 along with External FAT.

PRACTICAL TRAINING

Undergone training on ALSPA P320 system at APIL, Delhi, which includes
* Hardware structure definition in Alspa P320 s/w.
* Use of libraries- system and business, Creation of MVM's & SVM's.
* Definitions and use of: PFUP functions, Function diagrams, owners, closed loops and open loop functions.

HMIDB
* Views creation -(mimics, extended & windows)
* In-house training of wiring schedule for ALSPA DCS system with Marshalling and Local Junction boxes.
* External Training at Dadri Power Plant and Badarpur Power Plant for Thermal & CCPP Processes.

EDUCATION QUALIFICATION

Institute of Engineering and Technology (IET), Lucknow Jun '03 – Jul '07
B.Tech. in Electronics and Instrumentation Engineering May 2007
RESULT: 72.7 %

B.N.S.D.Sinksha Niketan, Kanpur
U.P.Board Intermediate Examination, 2002 RESULT: 83.4 %

O.E.F.Inter College, Kanpur
U.P.Board High School Examination, 2000 RESULT: 83.0 %

PERSONAL DETAILS

* Date of Birth: 05th April' 85
* Sex: Female
* Marital Status: Single
* Nationality: Indian
* Languages Known: English, Hindi

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7001 to 7050 of 15341)

Go to Search Parameters...

Brief Description

Analysis Estimation-Officer 10 years as operations engineer in power plant

HSE, H2S, Fire fighting, Fire protection, Inspection, Rig or Plant, Off or on Shore

Electrical Engineer, Transformer especiallist, excellent project management, supervised High Voltage test field project C$ 20 M, excellent computer skills including networks administration

Master Qualified Instrument Engineer with 10 years experience of detailed design engineer

Working as Mechanical Maintenance Supervisor.

Summary of Experience

Masters Degree in Metallurgical Egg with Specilisation in Welding Egg. Prepare, Review & Approve Welding Procedures as per various Codes / Standards. API 510 Pressure Vessel Inspector.· Trouble shooting of welding and related issues.

Inst. Engineer with 13 years Inst. Design experience in the field of Oil. Petrochemical Refineries. Attended FAT/ SAT, Hazop etc.

Seeking professional or technical employment in Software Engineering, Computer Science, or Web Development. Offering extensive education and experience in computer science and mathematics.

Operation Drilling Engineer - Drilling Superintendent - Drilling/Completion/Work Over Supervisor

30 + years in Security and Law Enforcement. Extensive management experience having worked in several positions throughout the world

The past ten years in the construction industry has been most fruitful and challenging as I have found that supervision work includes duties of engineers,architects & contractors at times, from co-ordinating M&E & Architectural activities down to helping the main contractor to arrange meeting with c

Construction Manager / Superintendent /Commercial

Project Manager/ Superitendent/Estimator

PDS, CADWorx, Rebis AutoPlant

HSE Officer

24 years exp. oil and gas manufacturing, machining, repairing, rebuilding of all components of drilling and service rigs. Also gas plant experience. Have a red seal machinist ticket acquired with a grade 12 education at the northern institute of technology, Edmonton Alberta Canada.

A senior Process Analyzer Specialist with twenty – five years of experience in the Petro Chemical Industry. Strengths include: design work, upgrades, start–up assistance, works to meet tight deadlines and budgets; pays close attention to detail.

Fully experienced in all aspects of maintenance of oil and gas production facilities, hands on experience of major overhauls of rotating equipment which includes operation of GE frame 5 Gas turbines.Responsible for supervision of all disciplines to ensure safe and efficient maintenance proceedures.

About 10 years experience working for Copper and Cobalt mine. Experienced in both underground and Openpit minig methods. Proficient in the use of datamine mining software, and I'm conversant with both underground and opepit mapping

Exploration Geologist, Geologist, good in Mapping, drill crew supervicing, Diamond and RC core logging, trainning of local field assistants and field technicians, office management and administration, map production, report writing

I m B. Tech. in Bitechnology working as Mud Engineer

Professional Qualified Accountant-CPA(K), Diploma in HR Management holder & have a hands on experience in Fund Accounting . I am a team player, work with minimum supervision, dependable and expert of high integrity. I have hands on experience in Computerized Accounts i.e QuickBooks & Sage

I am working as a Plant Inspector with AIB-Vincotte International ltd. I am involved in inspection activities in Petroleum sector for the last 11 years, am well familiar with most of International codes and standrards such as API, ASME, BS, ISO etc.

reated designs for electrical equipment, conduit, and cable in power plants. created equipment schedules, conduit schedules, and cabling schedules to be used in the field. also created wiring lists to keep track of cables and wiring documentation in excel format and gsn

20 years of project management, EPCM international experience in Oil & Gas. On shore, chemical, petro chemical, LNG, power plants, offshore platforms, from inception of project through design to built up & close out. Cost estimation of global tenders of capital projects,.

I'm a Mechanical Engineering Graduate with vast experience in oilfield static and rotating equipment operations and process drawings

INSTRUMENTATION ENGINEER EXP. IN OIL&GAS FROM SAUDI ARAMCO PROJECT

Able to operate and maintain well and familiar with typical oil / gas production flowing well, Sub Sea Well and Gas lift well.

Rotating Equipments : Centrifugal Pumps, Split Casing Pumps,Sea water pumps Steam Turbines, Gas Turbines, Reciprocating Compressors, Turbo Compressors, Rotary Feeders, Lobe Blowers, Conveyer Belts ,Diesel Generator ,Hydraulic pump, High pressure piping, valves, High pressure water tube boiler, Heat

I have worked as Mudlogging Geologist in Baker Hughes Inteq For two years, For detail View my CV

The above given details are true to best of my knowledge & if any wrong I agree to do your needful.

B.E. graduate with more than 2 yrs of experience in Primavera and IT

Mechanical engineer having more than 2 years of experince in mantanance of underground mining machineries in coal and metal mines .

Driller

Piping design engineer (pdms) with 2+ years exp.

BE MECHANICAL WITH POST GRADUATION IN PIPING ENGINEERING, PDMS,AUTOCAD 2004

More than 8 Years of experience in the field of ELV System specialist well versed in Installation testing and commissioning of systems Including Building management system, CCTV System, Access Control system , Structured cabling etc..Having gained extensive experience as a team leader in execution

Working for Schlumberger oilfield services as Directional Drilling Engineer in Republic of Yemen

DCS AUTOMATION SYSTEM DESIGN ENGINEER

COmputer Literate--AutoCadd,Primavera,MSoffice Applications

with computer proficiency in SESAM, ABAQUS, PATRAN, FLEXCOM, ASAS, SACS, FEMGV, STAAD Pro, AutoCAD, and MathCAD

Extensive diverse EPC Management, Operations, Consulting - domestic & world=wide, all disciplines Refinery, Petrochem, Chemical and Pharm. projects, operations and plant trouble shooting with associates power and infrastructure.

Managing multidisciplinary Sub Surface Team in respect of strategic planning, coordination and monitoring of sub surface activities

Expertise in analysis of Chemicals, petrochemicals, petroleum products using instruments like ICP-OES, GC, HPLC, AAS, FTIR, CS Analyzer etc. Having expertise in SPC / SQC techniques, LIMS and SAP QM module. Research in Petrochemical and petroleum products. Worked for Chevron Oronite lube additive co

If you are looking out for someone who can 'Make a difference', Daring, Challenging, 'Thinking out of the box', Multi-tasking ability, is not afraid to speak up his mind plus Business Development, People Management proven experience & skills, please read this application.

Exploration geologist in oil company. Structural geologist

Ph.D., Zoology (Commanded) Bharathidasan University, Tiruchirappalli, Tamilnadu, India, Thesis title-Oil effluent toxicity and detoxification responses in the freshwater mussel, Lamellidens marginalis

Having more than 12 yrs experience in safety field. Ready to accept any new challange. could able to work any pressure environment.

I have 22 years of experience in the mining industry, Blasting Certificate For Open Cast Mines; Blasting Certificate For Scheduled Mines; Detnet Blasting Certificate.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 [ 141 ] 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out