Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #87715 next resume »»
CONTACT INFORMATION:
View contact information...

Over 25 years experience in construction/pipeline business. On the job experience includes pipeline work, pipeline utility inspection, heavy equipment operation, supervising crews in hazordous waste remediation, remediation of contaminated soils, underground utilities, site preparation, & other major earth moving jobs.

EDUCATION/TRAINING:
OSHA 40 Hour Hazardous Waste Worker Training 29 CFR1910.120(E)
OSHA Construction Standards Training (Geo Construction)
Trench & Excavation Safety Training
ISNetworld Operators Qualification (Updated May/2007)

EMPLOYMENT:
Feb/2009-May/2009 Heavy Equipment Operator, WillBros,Inc.
Operated trackhoe on tie-ins, backfill, & clean up for pipeline project in
Atlanta, TX area. Operated trackhoe on lowering in & tie-ins for line being constructed in Jacksonville, TX area

Nov/2008-Jan/2009 Heavy Equipment Operator, Gin-Spin, Inc.
Operated trackhoe on tie-ins for pipeline project in Stonewall, LA area

October 2008 Pipeline Utility Inspector, CH2MHill, Inc.
Was responsible for bending inspection on line near Craig, CO area

June/2008-Aug/2008 General Superintendent, Pipeline Services of Iowa
Managed 10 mile 16 inch Magellan pipeline project in Houston, TX
Responsible for 176 employees which included 5 foremans

Feb/2008-April/2008 Superintendent, Copperhead Pipeline
Managed 2 crews on rehab project in Kansas

2007 Foreman, WillBros RPI
Supervised 2 backfill crews on line going from Longville, LA to Buna, TX &
also helped with lowering in & tie ins

2007 Foreman/Assistant Superintendent, Sunland
Supervised 4 crews on dual line at Exxon Corridor from Mt. Belvieu to
Webster, TX. Work also went thru Teppco plant in LaPorte, TX. Crews were responsible for ditch, lower in, tie ins, backfill, & clean up. Worked closely with Superintendent & gas company personnel.

2007 Assistant Superintendent, Tanner Pipeline
Oversaw start up of 7 miles of 24" line in Eunice, LA area which included right of way, stringing, environmental, matting across wetlands, etc.

2006-2007 Pipeline Utility Inspector, Mustang Engineering
Inspected over 19 mile pipeline project from Goforth to Isbell in Cleburne,
TX area for Eagle Mountain Pipeline. Chiefed over final clean-up which also included dealing with land owners.

2005-2006 Heavy Equipment Operator, Driver Pipeline
Operated heavy equipment on right of way, clearing & cleanup, stringing, dug ditch, lowering in & tie-ins on 9 miles of 30" in Longview, TX area

2004-2005 Heavy Equipment Operator, WillBros RPI
Operated blade, track hoe, clam hoe, & various other equipment on pipe-
line projects in Sanger, Centerville, & Hillsboro, TX areas

2002-2003 Heavy Equipment Operator, Sunland Inc.
Operated heavy equipment on pipeline right of way & cleanups, dug ditch, bore pits, and backfilled on various pipeline projects which included line going thru Texas City and LaPorte, TX

2000-2001 Pipeline Utility Inspector, BMH Eagleton, Inc.
Oversaw directional drills, road bores, welding, backfilling & cleanup on various pipeline projects in the Texas area.

1997-2000 Owner/Heavy Equipment Operator, Wolf Excavating
Job estimates & bids, managed & oversaw all jobs & employees in a self-owned company

1995-1996 Foreman, DIECO Pipeline Services
Managed a crew during rehab work & pipeline maintenance for Oxychem

1994-1995 Project Supervisor, Environmental Remedies
Sewer rehab work for City of Houston, TX, met & dealt with city inspectors, managed crews, oversaw & operated equipment on an envir-
onmental job for Dupont.

REFERENCES:
Will be provided

View contact information...
«« previous resume next resume »»
Search Results (Resumes 7901 to 7950 of 15497)Go to Search Parameters...
Brief Description
Senior PDS and/or PDMS Structural Designer. Experience in all aspects of design; from conception of design (FEED), layout work to detail design in the Oil and Gas (onshore/ offshore), Refinery/Petrochemical plus Power Generation industries for EPC&M companies in Europe, Asia and Australia
IT Manager
I am a civil engineering diploma holder with 8 years exp.in high rise residential and commercial buildings.
Several years of experience in CAD drafting in wood carpentry including 10 months work in Middle East, at present I work as Bulk Handling Design Engineer in a European company, part of my work is to design bulk handling system of cement cargo ship and supply vessels including loaders and unloaders,
Diploma in Electrical and Electronics Engineering ¡V 3 Years
I am interested in continuing within electrical, instrumentation and administration or even any place related because I am flexible to learn, and make myself marketable in the industry and commercial, etc. I have excellent skills and strong sense of environmental and safety issues.
Strong in mechanical,electrical and plumbing.mobile or fixed equipments or engines are my categories where I am efficient as a hard worker, innovative, result oriented
Dual Trade mechanical fitter, steel fabricator, welder with supervisory experience. I have a keen in safety and have been a safety supervisor on jobs before.
Ihave an experiece of more than two year in desiginig of heat exchager and pressure vessel in an oil and gas fied andmy objective is to work with an organisation that can utilize and sharpen my skills in Mechanical design(pv elite software), Thermal design, Process design
I am an highly versatile and enthusiastic individual. Self motivated with a confident, friendly and sociable personality.I'm a supportive team member who also works well on own initiative.I am able to work under pressure and prioritise heavy workloads.
Piping design an stress analysis
December 2008 graduate of Texas A&M University with a degree in Petroleum Engineering. I am seeking full time employment as a Petroleum Engineer in the oil and gas industry. Please find my resume attached to this email, I look forward to speaking wit
Acoustic operator/Search and Rescue Instructor/Sonar operator
Red Seal Millwright, Class 1 Drivers Liscense, Mine Rescue, First Aid Ticket, H2S Alive, Whimis, Confined spaced entry and rescue, Fall protection.
ABILITY TO DRAW AND INTERPRET ENGINEERING DRAWING
Corrosion/ Material/ Metallurgical/ QA/QC Engineer
To contribute to my Organization's success through the use of effective customer,managerial and people skill.To serve reputable Organizations with an undying passion for excellence and creativity.
NVQ level 2 Scaffolder with 8 years experience and offshore experience. Offshore survival and full medical
Advanced skills for professional design in 3D (Autodesk Inventor 2009)
Heavy duty mechanic
Oil and Gas Equipment supply
Mechanical Draughtsman with Diploma in echanical Engg. 5 yrs. Exp.
Computers, home building from foundation up. Media instalations (cable industry work)
Experienced workover rig driller looking for international or domestic work as the western Canadain oilfield has slowed down. I am hard working, a quick learner and very adapable to new surroundings. As you can see from my resume, I am a dedicated and loyal employee as well.
Skills include Lease Negotiations, farm ins and farm outs, JOAs, Oklahoma Corporation Commision forms and requirements, Pooling Orders, Division of Interests, Due Diligence, Title Curative, Ownership Reports.
Qualifications & Skills: Title Runsheets, Lease Take Off's, Ownership Rpts., Lease Acquistions and Due Diligence
structural drafter or designer, preferably on the offshore indestry.
Bulldozer Operator, performed pre and post operation of the bulldozer
I am looking for a career within a company that promotes from within and encourages continuous learning as well as where my enthusiasm, drive and knowledge will be a valuable asset.
Skills- Creative and Innovative, Good Communicative Skills. Ability to Work under Pressure. Ability To Mobilize And Supervise People. Strong in Team spirit. Microsoft Office software and the Internet, , Qualificatiions- Higher National Diploma (HND) in Insurance (Lower credit), 2007.
Instrument design wihin oil and gas industry. Using Intools and CAD packages.
I have been working for 6 years on inland drilling rigs. I worked my way up to driller last year & have 4 years exp. as a derrickman.
B.Sc Honours Mining Engineering
Senior Cased Hole Wireline Engineer
Conducting baseline Survey, Conducting technical and Enviro legal study,Modeling of Air impacts using ISCST 3 and CALINE 4 for evaluating the proposed change in concentration of various pollutants, ,Conducting Public hearing Preparation of EMP (Environment Management Plan), M.Sc environemnt science,
Welding Inspector/Trainer/Supervisor
Deepwater Completion engineer
Master Electrician
ERZ Controller (Underground Deputy)
20+ years exp and Involved in the commissioning of Copper/Gold Mine, Barrick Buzwagi
Over 25 years experience in the pipeline construction industry. Positions held range from heavy equipment operator, superintendent, foreman, & utility inspector. Qualifications listed with ISNetworld, OSHA Safety certifications
11 years of experience in Project Cost Control on Saudi Aramco Projects in Saudi Arabia. Presently working for Saudi Aramco thru secondment.
+16 yrs of experience in EPC/PMC, TPI Quality control & in Construction Companies. Having well experiences for various stages wise Inspections involving Pressure Vessels, Storage Tanks, A/G & U/G Piping & Structural Steel Works. (ONSHORE & OFFSHORE).
Comprehensive drilling experience of 11+ years in various locations worlwide with E&P Operators. Four years experience as Drilling Supervisor offshore Thailand and Gulf of Mexico. Seven years Drilling Engineering experience onshore and offshore, includes day to day rig operations management.
BSc Hohours Degree in Mining Engineering, Now working as Planning Manager for an Open Pit operation. Very good in Planning , using Surpac Mining software.
Production Technology, Completion Engineering, Well Testing, Nodal Analysis, Flow Modelling & Production Optimization
My experience in construction 6 years with contactor company.
Competent Mine Geologist, Key skills - Analytical, underground mapping, core logging, Resource estimation using Datamine as well as leadership skills
20 years Materials Controller / Coordinator
sr;mechanical engineer /project engineer/construction engineer/manager/engineer
First   Prev   151   152   153   154   155   156   157   158   [ 159 ]   160   161   162   163   164   165   166   167   168   169   170   171   172   173   174   175   176   177   178   179   180   181   182   183   184   185   186   187   188   189   190   191   192   193   194   195   196   197   198   199   200   Next   Last
Seach Parameters

Goto Advanced Search...
Keywords: (e.g. mining engineer)Find results with:
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com