Resume - Experienced derrick operator, floor hand, roustabout, and driller

Misco Jobs

Resume #87788

CONTACT INFORMATION:
View contact information...

Objective: To obtain a drilling position where my hard work, extensive knowledge, skill and aptitude to learn can be tested and utilized

Education:
* Whittier Christian High School
* Cypress College (General Education)
* Computer Career Connection (Computer Repair A+Certification)
* East Los Angeles Occupational Center (Electrical)

Qualifications:
* RCO certification
* I have received safety awards for hours worked without accidents and injuries.
* Able to operate a forklift and backhoe
* I have many years experience in the oilfield industry and construction field.
* Have extensive knowledge of tail-gate meetings.
* I have trained floor hands and derrick operators
* I have qualifications to be floor hand, derrick operator and driller

BC2 Environmental Drilling 11/27/06 – 2/12/08
Helper
* Loaded trucks with cement, concrete, sand, gel and asphalt.
* Assembled and positioned machines, augers, casing pipes, and other equipment,
* Operated forklifts to move pellets of various materials.
* Changed the drill bits according to the type of strata, using hand tools.
* Cleaned trucks, work areas, and drill rigs
* Followed and enforced safety procedures.
* Perform other duties as may be assigned.
* Inspected core samples to determine nature of strata, and gave samples to geologists for analysis.
* Cleaned and prepared sites for excavation and boring.

KENIA DRILLING 12/13/01 - 04/21/03
Floor Hand
* Get equipment together for that day's projects.
* Cleaned up work areas and removed debris after extraction activities were completed
* Perform other duties as may be assigned
* Organized materials in order to prepare for use
* Drilled or bored holes in rock for blasting, grouting, anchoring, or building foundations.
* Used tongs to connect and disconnect drill pipe, equipment maintenance, assisting in lay casing after well is drilled, assisting other members of the crew as needed
* Changed drill bits

NABORS DRILLING 06/02/01 - 12/03/01
Derrick Operator
* Control the viscosity and weight of the drilling fluid and pumps.
* Inspect derricks for flaws, and clean and oil derricks in order to maintain proper working conditions.
* Supervise crew members, and provide assistance in training them.
* Retrieved and ran pipe in to holes

POOL WELL SERVICES 04/26/99-06/01/01
Floor Hand/Derrick Operator
* Guide lengths of pipe into and out of elevators.
* Steady pipes during connection to or disconnection from drill or casing strings
* Control the viscosity and weight of the drilling fluid and pumps.
* Retrieved and ran pipe in to holes
* Changed drill bits
* Used tongs to connect and disconnect drill pipe

BEYLIK DRILLING 0- 08/01/96-4/25/99
Floor Hand/Driller
* Drove or guided truck-mounted equipment into position, level and stabilized rigs, and extended telescoping derricks.
* Placed and installed screens, casings, pumps, and other well fixtures in order to develop wells
* Worked on a double stage drilling rig
* Tightened and loosened pipe in and out of hole and got samples for casing builders
* Operated a back hoe to retrieve materials and clean out pits
* Also learned to drill under supervision of Mike Hart.

VECO DRILLING -01/95-07/96
Roustabout
* Assigned to an offshore rig site on Thumbs Islands on a 7 day on 7 day off schedule. Was also assigned to rigs on Island White and Grissom in Long Beach
* Worked on platform harvest in Santa Barbara
* I put pipe on cat walk for floor hands above, greased all moving parts to ensure proper working condition
* Cleaned up drill rig work areas
* Loaded and unloaded all supplies using forklifts
* Put fuel in rigs and relieved floor hands when necessary
* Made sure while picking items up all slings were good stayed out of pinch point areas and made sure shackles were tight.
* Assisted other members of the crew as needed, and "general housekeeping"

ARCO REFINERIE - VECO INC. 05/94-12/94
Electrician's helper
* Primary duties included assisting electricians to install, repair, replace and maintain electric systems, appliances, and equipment
* Tasks ranged from reading meters in dimly lit areas to working in areas of hot temperatures with poor ventilation, using hand tools and saws to cut conduit and wires, and carrying tools and equipment up and down stairs.
* Assists electricians in cutting, bending and in the assembly and installation of electrical conduit.
* Install conduit, wiring and related devices for refineries
* Pull wires through raceways and conduits, mounting outlets and switches
* Trace out short circuits in wiring, using test meter.
* Thread conduit ends, connect couplings, and fabricate and secure conduit support brackets
MOBIL REFINERIE - IRWIN INDUSTRIES -01/92-3/94
Fire watch
* Stayed at work areas for 30 minutes after crew to ensure that fires did not ignite
* Measured toxicity levels to ensure that workers were safe to enter work area
* While crew was working, manned the area with fire hose and extinguisher

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2301 to 2350 of 15312)

Go to Search Parameters...

Brief Description

I have more than 15 years experience in the industrial field, but I am certified in the field of quality management and assurance, and right now I am working as quality management and assurance manger in ole jordan(bmw, rover and mini automotive dealership) and I have been worked in arab potash comp

Preparation of companies to ISO 9001, 14001, API SPEC Q1, OHSAS 18001 or any other Management systems standard certification.

I was working at sea for 28 years, including 12 years as a Master. Though I have a quite large experience in the trading on tankers I would like to find the same position in offshore industry, such as FSO, AHTS, PSV w/ot DP.

VP exploration of several junior mining companies. Responsible for the discovery and development of 3 MOZ (+) Au Charaat deposit in Kyrgyzstan. Twenty six years experience in Ore deposits discovery and development with emphasis on Au as well as Cu, Mo and W

Experienced Senior Drilling Supervisor • 29 years hands-on oil field experience, including cyberbased Jack-ups, semi-sub and platform rigs and all size land rigs.

I was directly responsible for all completing timely daily drilling and cost control reports required by the operator and regulatory agencies; ensuring equipment and materials meet project and regulatory requirements; ensuring project inventory requirements are met; enforcing company health, safety,

Welding Supervisor

Msc in Safety, HND Safety tech. NEBOSH, ASP

I am a dedicated professional who understands the importance of retaining accounts. My ability to get the job done, including quickly and accurately diagnosing and troubleshooting technical problems, has solidified the loyalty of numerous clients. I assure you, these factors, as well as the skills i

I desire to maintain a safe and efficient work standard that will reach the client goals as well as keep moral at its highest between all service groups involved. I plan to do this through excellent communication skills and proffessionalism.

Have been a Project Manager/SCM for more than 10 years, also have been in charge of Permitting.

PDMS piping designer. PDMS modul design, draft, izodraft. Layout drawings and ISO sketch. Expeience in: piping design for power plants, Steam turbines, compressor plants, support design for chemical industry and refinery

I am actually working on behalf of ExxonMobil refinery in France as a system and network engineer. I have a good experience in control systems (PLC and DCs based systems) as well as in SCADA supervisory. You can find enclosed my CV with a brief description of my skills.

Accountant, Accounts, Finance, Financial

I am capable of all aspects of the oil field.

Over 8 years(1 Year in Kazakhstan) Professional Experience in Project Document Management, Administrative and Document Control of Engineering Procurement and Construction activities of Process Plants including Oil and Gas Installations (NGL and Sour Gas Facilities), Refineries and Petrochemicals. M

I have 25 years experience in mining. My day-to-day output reflects a high level of motivation, efficiency, and ability to meet any objective. I have a proven ability to troubleshoot, perform under a minimum amount of supervision, and demonstrate a high degree of initiative and good judgment.

Over 25 years experience in automotive, heavy equipment, and tractor / trailer repair, maintenance, and rebuilds. Repair, maintenance, and diagnostics on all types of heavy equipment / tractor trailer in shop and field service. Rebuild on all types of engines to include Caterpillar, Cummins / Detro

I am a multi skilled and highly proactive manager, with strong people management skills which have been developed in highly competitive and constantly changing environments, I have worked in the industry for some 17 years, both in house and also in the service providers roles.

Worked as Material Engineer for Saudi Aramco Material Standardization Division for Equipment Spare Parts Cataloguing Project. Proficient in using SAP R/3, MACs, UNIX and ESP4.

Experienced derrick operator, floor hand, roustabout, and driller

Welding Engineer Specialist

23 years of experience in Oil & Gas production and maintenance for offshore and onshore facilities. Experience includes in monitoring Condensate Stabilization Unit, Crude Oil Processing, Gas Compressors and Gas Dehydration System.

Professional Surveyor & Mapper, Thirty years experience. Construction Layout, Quanity Surveys, As-built Surveys.

Asphalt foreman and paver operator

EDUCATION : TECHNICAL SCONDARY SCHOOL 1977

Innovative Crew Foreman responsible for safety and production and 10 employees. Career safety leader with zero crew accidents. Excellent trouble shooting skills and reputation for new ideas to improve the process. Ability to maximize product yields and find ways to upgrade systems. Direct experi

Over 20 years as an industrial electrician

Diploma of Engineer - geologist/hydrogeologist with some experience in micropaleontology.

Work ethic, sense of urgency, accountability and a multitude of diversified experience is what I have to offer.

Twenty four years experience in the safety sector of the oil and gas industry.

33 years mining experience from onsetter shaft timberman stoper developer shift boss mine overseer work 2 years for telcom as a telephone electrician i'm compitent in all mechanical machinery can do welding and small electrical installations

Wellhead, X'mas Tree, Valves, Operations

Worked in Gas Dehydration, Well head, Gas Swetling, Utility & Tank Form& LPG Plants

Hands on experience in Primavera Planner, V 5.0, V 6.0 (Planning and Controlling Projects)

28 YEARS OF EXPERIENCE IN ENGINEERING RELATED DESIGN AND CHECKING OF MAJOR PETROCHEMICAL, NUCLEAR, REFINERY, INDUSTRIAL AND COMMERCIAL FACILITIES UTILIZING AUTOCAD, MICROSTATION, PDS FRAMEWORKS, SMART PLANT REVIEW, TRIFORMA & BENTLEY NAVIGATOR,. WORKED ON A VARIETY OF DOMESTIC AND INTERNATIONAL PROJ

20 yrs piping detail engineering in Petrochemical/Oil and Gas / Offshore with multinational EPC companies.

Process Operations Superintendent

4 year Bachelor of engineering degree. 21 years total experience. Familiar with drilling/workover /fishing operations and tools. Past three years working as Company man/Drilling supervisor.

Experienced In Construction & Commissioning Of Oil & Gas/ Petrochemical/ Refinery/ Fertilizer And Power Projects Both In Offshore & Onshore.

Team leader for Well Engineers, using probabilistic casing design & stress check software in order to design and write drilling & completion programs for deep HP/HT wells. Contract holder for drilling contractor and also active with VAR’s, WDP & other Shell initiatives.

I want drilling supervisor/Rig superintendent job

I have successfully completed innumerable complex and difficult Tasks/projects at minimum cost. At present I am working on a ‘Project’ namely ‘Rajiv cum Bush effect’ with my son (Computer Student) to revolutionize method of Production of Bits which has immense commercial value.

I was in overall command of the vessel and responsible for the operation and safe navigation as per local and international maritime laws, conventions, rules and regulations. Responsibilities -cargo operations as per relevant C/P terms/clauses,Risk Assessment,personnel management.

Over 12 years experience in oil and gas industry

Experienced CSA Designer

As drilling fluids engineer, my experience covers a wide range of mud engineering aspect : to control the running of the mud system on the rig accordance with the operator’s requirements and in a safe manner, to ensure there are sufficent quantities of the correct materials to meet these requirement

Conduct safety meeting before start to work, Supervision, planning of works, review all P & ID, Isometric Drawing, arrange and withdraw all materials involved in the area of assignment, conduct hydro testing and pneumatic testing of lines, conduct pre-commissioning and commissioning activities, work

worked in General Banking and Forex department

I have been working in the field of safety professions for 12 fruitful years in deffirent construction industries such as Oil and Gas, Refinery plant, Petrochemical plant and civil works construction. I got a various training for International safety standards, including OSHA training.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 [ 47 ] 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out