Resume - Indonesian Mining Engineer with Operations Experience Surpac and Vulcan

Misco Jobs

Resume #87790

CONTACT INFORMATION:
View contact information...

University Education: Bachelor Degree, Mining Geological Engineering (S1)
National Technology Institute, Yogyakarta, Indonesia

Over 13 years of international experience in the mining industry. Experience includes both technical and operational supervisory roles of increasing responsibility. Fluent in Bahasa Indonesian, with good verbal and written English skills.

Training:
* First Class Approved Handler for both UG and Open CUT from NZ, 2008
* I-Kon Blasting Training for UG, NZ, 2008
* Blaster II and Indonesia Blasting Permit, 2005
* Search and Rescue Program and Certification, 1999
* Environmental Impact Assessment Course Type A Certification, 2001
* First Aid Course at PT. Freeport Indonesia Company, February 2002
* Heavy Duty Equipment Examiner / Trainer, licensed for underground mining equipment 2001
* Presentation Skill (PSK 100) by PT. Freeport Indonesia Company, May 2002
* Caterpillar Trainer (Loader & Truck) By Trakindo Utama, June 2002
* Leadership Training for Basic and Advanced, 2004
* Six Days Supervisory Training, May 2004
* Master Observation Program Training, May 2004
* Fire Warden and FFE training, June 2004
* Lower and Middle Supervisor Certificate, 2005

Employment Experience:
Sept 2008 - present: Metal X (Bluestonetin Tasmania Mine Project)
Mine Planning/Production Engineer (Underground Stoping, Back filling w/ CRF)
* Special Projects Supervisor for mine dewatering
* Issue Development and Production designs and schedules
* Supervise surveyors, engineers and contractors
* Production drilling and blast design (Surpac & Ringking)
* Stope production & Back Filling sequences.
* Grade control coordination with geology.
* Mentoring and supervising junior mining engineers.

June 2007 ¡V Sept 2008: OceanaGold (New Zealand)
Sr. Production/Drill & Blast Engineer (Underground Open Stope Mine)
* Underground stope and development design
* Drill and Blast design and schedules
* Development and implementation of construction schedules
* Assist in transition from open pit to underground mine
* Mentoring open pit engineers to underground competencies
* Stope Reserve calculations and stope sequencing
* Achievements: Consistently exceeded Production goals, achieved all Safety goals, implemented geotechnical solutions for improved stope performance
* Software: Surpac, Ringking, Vulcan, MineSight for design, iGantt, MWP, MS Project

July 2005 ¡V June 2007: PT Freeport Indonesia Company (Indonesia)
Chief Engineer, Planning and Scheduling, Biggosan Project (Open Stope, Paste Fill)
* Planning and design for both development and production
* Create and issue integrated development and construction schedules to the mine contractor (Redpath)
* Track contractor progress and issue production status reports for the Project Manager
* Reconcile monthly actuals to plan and report KPI's
* Establish warehouse inventory levels for consumable supplies necessary to support the project
* Act as Safety Representative, participate in accident investigations, produce written incident reports
* Conduct HS & E internal Audits/inspections, 10 Point Safety inspections
* Software: Vulcan, iGantt, MWP, MS Project

November 2004 ¡V July 2005: PT. Freeport Indonesia Company, Underground Shift Foreman
* Directly supervise four shift foremen
* Mentor staff (Instructors) for daily work activities, including, safety and QA/QC
* Supervise Drill & Blast operations to optimise multiple heading development by the contractor
* Conduct daily safety meetings, issue daily line outs to the crews, input shift reports
* Developed JSA's, SOP's, and PJO's
* Examiner and Trainer for underground equipment operation
* Delivered professional competency based training and assessments

June 2004 ¡V November 2004: PT. Freeport Indonesia Company
Crew Leader (Sr. Instructor) Quality Management Service, UG Mine Training Department
* Directly supervised two Shift Foremen and seven juniors
* Drill & Blast supervisor, development and production
* Involved in Development design and short term scheduling
* Lead daily, weekly, monthly safety and planning meetings
* Examiner and Trainer for underground mine equipment and underground skills competencies
* Acted as Safety Representative, conducted incident and accident investigations
* Develop, implement, monitor and review Training and Assessment Schedules
* Develop training materials, modules and training matrix

„« May 2003 ¡VJune 2004: PT. Freeport Indonesia Company
Project Leader for Underground Training Dept (Apprentices Program/Papuan Development)
* Coordinate daily, weekly and monthly training for miners, operators and mechanic apprentices
* Directly supervise six instructors; two Mechanic, two New Miners & two Operators
* Examiner and Crew Trainer for underground and open pit equipment
* Planner/Scheduler for equipment preventative maintenance

Dec 2002 ¡V May 2003: PT Freeport Indonesia Company (QMS BUS UG)
Underground Crew Leader
* Schedule Miner and Operator training and licensing using Microsoft Project software
* Training of local indigenous personnel for UG Maintenance & Miner roles
* Report on daily, weekly and monthly training completions

2001 ¡VDec 2002: PT Redpath Indonesia, Affiliate of Redpath Canada
Training and Safety Department Coordinator
* Short term mine planning
* Tunnel Crew leader, mine operations
* New miner training and inductions
* Develop underground training materials, JSA and SOP
* Maintain the training database in both of Excel and Microsoft Access
* Fill in equipment operator

1997 ¡V 2000: National Technology Institute of Yogyakarta (Indonesia)
Geological Engineering Department's Assistant-Principal - Stratigraphy and Surveying Lab. Geotechnical lab assistant.
University Scholastic Results:
Grade Point Average of 3.1 on a 4.0 scale

1997-2000 Semi Military Student Association (Student-Life Guard Association)
Vice-Commander Battalion and from 1998-1999, promoted to Commander, 1999-2000
Asst. Chief of English students club, 1998 ¡V 1999

Jan. 1997 ¡V Sept. 1997: PT Freeport Indonesia Inc. ( Papua, Indonesia)
Limestone Project, Construction Surveyor and Technical Advisor
* Supervise engineering designs and drawings
* Construction scheduling
* Daily as-built pickups
* AutoCAD draftsman for Special Projects

1995 ¡V 1997: PT. Freeport Indonesia Company (Grassberg Mine Planning Department):
Open Pit and Underground Surveyor
* Mine surveying with daily inputs into both Topcon and GPS surveying systems
* Import survey data for daily reports using SDR, MS Word, Excel, AutoCAD and Vulcan
* Daily monitoring of mine shovel activity and slope stability
* Daily Production reports (daily, weekly, monthly and quarterly using SDR Program)

1994 -1995: PT. Buma Kumawa (Freeport Indonesia Co. sub-contractor):
* Engineering Department Surveyor for open pit mining Modelling
* Daily Field Surveying for Blast Hole, dump and pit
* Computer data logging of Survey data for daily shovel activities
* Open pit Operator for 777 Dump Truck, DN 8 Dozer

Technical Papers:
Geology Surface Mapping and Study Concentration Copper Mineral Deposits at Ngerjo area, Regent of Wonogiri, Central of Java Province, Indonesia.
My technical paper describes the depositional hydrothermal process of this deposit and the contained copper mineral. Research included sampling both the quartz-vein stockwork and the lateral deposit of sandstone alteration for assay comparisons.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6701 to 6750 of 15509)

Go to Search Parameters...

Brief Description

4 years experience in Quantity Surveying, also exposed in construction management works.

Customer Service Professional

Project Management

Yard superntendent for an offshore construction firm; additinal responsibilities; key holder, hiring, training, safety and quality control.

I have 4 years experience exclusively as a safety and Security professional. Presently working with Technical & Trading Establishment (Technical Division of Easa Saleh Al Gurg Group) as a Health & Safety Officer. As far as my Education is concerned, I Have Completed my Diploma in Mechanical Engineer

Title Research, Cursory Reports, Mineral Ownership Reports, Leasing of Oil/Gas Properties, Curative Research

One year experienced Exploration Geologist, M.Sc. Thorough capacities of observation, analysis and synthesis. Keen on field work, discovering and having challenges. Adaptable, conscientious and an effective team player with communication skills and ability on making decisions.

I have more than 14 years expertness in construction and 6 years in LNG and oil and last project for me was in Sakhalin I work there more than 2 years

Proficient in Microsoft Office suite (Word, Excel, PowerPoint) and AutoCAD

DCS(Foxboro I/A series),PLC Installation.configuration,Programming,FAT,SAT,Commissioning,SCADA(Wonderware) application development,Serial Communication

Electrician 10yrs exp.

A graduate with B.Sc. (Honours) degree in Physics, and also HND in Petroleum Engineering who is keen not only to find a job in the Oil and Gas industry but also grow with it, Reliable, trustworthy and meticulous. Worked for Diongoweb Global Nigeria Limited and also moved on to Zeus Projects Nigeria

I have worked as an Associate RF Engineer where my responsibilities were . Post & Pre Drives, Single site verification, hand off, call dropping, blocked calls, signal level, and frequency scanning . Used Delorme Streets & Atlas for route determination & navigation.

To obtain a Full time position in a prestigious organization, where I can solely implement the acquired educational, technical skills, knowledge and can establish myself as an asset to the organization in the field of Automation, Process Control, Manufacturing and Chemical Industries.

I am intrested to work as senior planning engineer with a consultant, project management group or with a developer in Abu Dhabi, UAE

Senior Operations Technician with over 25 years of experience as control room panel man/ field operator of LNG Plant, Jetty coordinator LNG. High pressure hydro cracker (isomax), hydrogen plant, CDU, Vacuum distillation and Visbreaker units. National Diploma in Technology Chemical Engineering

Free! Exploration Geologist, Structural Geologist, Exploration Manager

Indonesian Mining Engineer with Operations Experience Surpac and Vulcan

Engineer - Technical Support and Design LPG SNG GAS Operations

Fleet management coordinator

Participated in conducting FAT/SAT of Foxboro SCADA., Participated in conducting FAT/SAT of Ascom PDH/SDH Telecom System. Went for 15 days training for Administrator and Operator training on Foxboro SCADA System at Foxboro Rome, Italy.

Free! A highly motivated professional who excels and thrives on challenging work. Self-managing; results oriented – used to working under pressure, with the ability to prioritise work tasks and meet deadlines. Excellent communication and organisational skills, and leadership qualities.

Solutions-oriented Field Service/Application Engineer with a proven track record of delivering effective product engineering, maintenance and customization across a diversity of industries.

A Supply Chain Executive who has developed and executed a comprehensive supply chain strategic plan which has driven optimal customer satisfaction and profitability.

I am an Instrumentation Supervisor with a large experience in oil and gas projects, I have worked many years for importants companies in Brasil, Saudi Arabia, UAE, Mexico and USA.

Team Player, Computers, Procurement, Administrative

PDS frameworks, microstation, autocad. Over 30 years in the mining/Oil and Gas engineering field as a senior lead civil/structural designer. Now design supervisor mentoring junior and intermediate deisgners.

Safe Operation of Cranes to 300 Tons

I’m looking for a job that offers short or long term possibilities in your cuisine with responsibilities and possibilities of advancement.. I have twenty years experience, with a total of four years of culinary studies in two of French most reputed schools ( Auch and Mazamet ).

Primavera Project Scheduler

I have hands-on experiene in the field of Oil&gas, refinery as well as Petrochemical for past 10 years in Indai as well as Guld. I was invloved in the Control System FAT, Power-up, SAT, Hot/Cold cut over and Maintenance.

I believe my experience and solid record of achievement makes me an ideal candidate for the current open position in your company.

Presently working as Control Room Operator in a Natural Gas Plant & Shallow Water Platform for almost 5 years. Had also worked in Abu Dhabi with GASCO (NGL Plant) as process/utilities/control operator for 4 years & 7 months. Senior operator with Brunei Shell Petroleum (LNG Plant) for 4 years.

Experienced Geologist/Technologist with strong management skills. Varied exposure to all aspects of the Mining Industry.

Engr, design, & spec of process instruments with field instrumentation, PLCs, & DCS's in refineries & petro-chemical plants. Created schematics, loop diagrams, install details, location plans, & data sheets. Proficient in AutoCAD. 100+ university hours in Industrial Tech & Instrument Technology.

Maintenance, troubleshooting, and repairs @ plants, boosters, etc.

Seeking a position with an organization that allows me the opportunity to utilize my education, experience, skills, and talent to achieve and promote a common goal in a teamwork environment.

Construction Engineer in Oil and Gas Facilities

30 years of field experience; 14 years in mid to upper level management in the areas of: mining, oil field, construction and power generation. Proven ability to complete large scale equipment assemblies at remote locations.

Below is my resume, it will show that I have worked in the United States as a pipefitter for over 20 years. I am interested in working overseas on a job in-which my wife can accompany me.

Excellent communications skills, having worked with many groups of people who spoke little, if any English. Highly motivated individual with 29 years experience in the oil and gas industry.

Equipment operator, Open pit Operations

My qualifications appear to be in line with your requirements: - Over fourteen years of successful experience - Extensive experience with PDS, Plant view, Micro station and AutoCAD software - Strong background as a Lead and Senior Designer

CADD Drafting, Geo-Tech or Digitizer

Worked in Oil/Petrochemical/Refinery projects for a period of 21 years as Manager Construction.

Develop plant layout. Nozzle orientation. Check vendor prints. Prepare detailed drawings. Modeling 3D and Isometric. Job control and records. Pursue codes, standards and specifications. Assist construction. Maintains job control and records. Check work for accuracy. Prepare punch list.

Interested in finding new employment with growing company, foreign or domestic.

Graduate of the College of Construction Management Technology from Oklahoma State University. Competed on the Design Build Construction Management Competition Team at the AGC level. Completed and passed the first level of testing for the Contractor Certification.

Approximately 25 years within offshore and onshore Oil, Gas and Power generation construction engineering environments. Developing into a more specific Health, Safety and Environmental management capacity concentrating on Safety in Design and Construction, HS&E development (Projects

14 Years of experience in OIL an Gas Industry in Venezuela Engineering experience in Oil Treatment Plants, Compressor Plants, Oil and Gas Gathering Systems, Pipelines, Rotating Equipment.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 [ 135 ] 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out