Resume - Maintenance and Commissioning of Process control Instruments in Oil and gas Plan...

Misco Jobs

Resume #87810

CONTACT INFORMATION:
View contact information...

Post Applied for: Senior Instrument Technician

PRESENT EMPLOYMENT

At Present working in Kuwait Oil Company (K.O.C) as a Senior Instrument Technician Since 1997.I have the Experience of Process Control Instrumentation field
In Commissioning and Maintenance Project of Oil & Gas Gathering Centre.

TECHNICAL QUALIFICATION: Diploma in Electronics Servicing and
Maintenance Technology.
Trichy Regional Engineering College
Tamilnadu - 620 015.

: Electronics (N.T.C)
Government Industrial Training Institute.Tamilnadu-611 001.

SYSTEM KNOWLEDGE

DCS System: Rosemount RS3, Delta V.
PLC System: Hima (H51q), ICS Triplex, Turbo log
TMR (Man Tourbo).

Ruston Turbine: TA1500, TA1250 Woodward Control
System & Landex Control System.

Vibration System: Bently Nevada

JOB PROFILE

ƒæ Maintenance, Commissioning and Trouble shooting, Fault finding of Process Control Instrumentation in Various Oil & Gas Gathering Centre in Kuwait Oil Company.

ƒæ Errections, Commissioning, Loop Checking of Electronics and Pneumatic Process Control Instruments of Rotating Equipments Protection System for TV Compressor, Ruston Gas Turbine, Cooper Bessemer, and Solar Turbine.

ƒæ Preventive and Corrective, Breakdown Maintenance of Pressure,Flow,temperature and Level Control Instruments in Various Oil & Gas Gathering Centre.

ƒæ Servicing and Calibration of Pressure, Flow, Temperature and Level Control Smart Type of Process Control Field Instruments.

ƒæ Servicing, Calibration and Gland packing of Control valves & Smart Type Valve Positioners -Masoneilan, Fisher,Severnglucon,ABB,Blakeborough,Siemens,ABB.

ƒæ Servicing and Calibration of Level Trolls and Level Transmitters - Fisher, ABB, Masoneilan, Magnetrol, Tokyo keiso, Foxboro, Yokogawa.

ƒæ Servicing and Calibration of Different Types of Thermocouples and Multi Input Scanner cards & RTD type Temperature Instruments.

ƒæ Modification and Installation, Commissioning of Existing Pneumatic Instruments to Electronics Control Instruments in (DDP) Desalter Process Plant.

ƒæ Well versed of Instrumentation related drawings, P&ID¡¦s, PFD¡¦s, Loop & Logic Drawings, Cause & Effect Diagrams, Manuals, and Test Measuring Equipments.

ƒæ Material Maintenance Management System (MMMS) of Preventive, Corrective work orders following up for Daily Plant maintenance activities.

ƒæ Generating Work orders for Maintenance activities of Planned and Unplanned Shutdown Jobs through EWP System. (Electronic Work Permit).

ƒæ Involved with the Commissioning activities of KOC Project - EF1500 for Facilities Upgrading and relocation of Underground Process Piping and Control Automation System for Oil & Gas Gathering Centre.

ƒæ System Migration and Up gradation from Rosemount RS3 System to Delta V DCS Integrated Control & Safety System.

ƒæ Installation and Commissioning of Total Plant ESD System from Relay Logic to SSLS & ESD PLC System (Hima H51q).

ƒæ Installation and Commissioning of Automatic Dewatering System Level Probes (Agar Corporation) for Product and Storage Tanks at KNPC.Mina Al Ahamdi Refinery.

ƒæ Involved with Safety regulations team for permit to work System and Understanding safety Interfaces with Hazardous & Non Hazardous area.

ƒæ Involved with the System vendor for Interface with Modbus and Serial links with Hima PLC System to Delta V DCS System.

ƒæ Installation and Commissioning of Fusible Plugs at Crude Oil Storage Tanks for Deluge Auto Operation.

ƒæ Configuration and Commissioning of MOV's for Effluent Water disposal Plant and VSM crude Export Pumps.

ƒæ Modification and Revamping, Loop Checking of Ruston Gas Turbine with Woodward Governor System, FT-50 Control System for Condensate recovery Unit for TV Compressor in Oil & Gas Gathering Centre at KOC.

EXPERIENCE: 12 Years.

EMPLOYER
DESIGNATION DURATION
KOC Project No-29410.
Contractor-Kremenco Senior Inst. Technician. Since May 2007
Kimmco. Instrument Foreman
May 2005 - March 2007
KOC Project No-11154
Contractor -Heisco Senior Inst.Technician October 2001 - Nov 2004
KOC Project No-97G010
Contractor- Dabbous Instrument Technician October 1997 - Sep 2001

PERSONAL DETAILS.
Date of Birth: 26-05-1974
Marital Status: Married.
Nationality: Indian

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6151 to 6200 of 15488)

Go to Search Parameters...

Brief Description

University degree in Logistic's & Economics, 13 years hands on Middle East experience in all Procurement matters of small to huge EPC (design & built) Construction projects in public, defense & petrochemical works in both managerial & operational positions.

Crane operator/ outside machinist

My areas of expertise includes commissioning, start up, shutdown and operation of gas plant, refinery and oil production units.

I am Mechanical Engineer having 14 years of working experience in Maintenance of Petrochemical and Fertilizers Plants. Good knowledge of SAP, MS OFFICE.

I am an Electrical Engineer from Colorado School of Mines. I have worked for two major oil companies. I have worked on several areas of energy industry as an Electrical Engineer.

Supervisor - SAFE Underground Mining/Training - Production/Development and Construction. Atlas-Copco, Boart-Longyear, Wagner, Caterpillar, etc. 20+ years in Underground Gold, Silver, Lead and Zinc.

* Construction Project Manager * Engineering Design Manager * Civil/Structural Engineer

Customer service, Training and I & C; Problem Solving + fault finding; Contract negotiations / Presentations; Flexibility and adaptability to rapid changes

A result oriented professional with 15.0 years of experience in Production Planning and Control, Quality Assurance, Operations & maintenance and Projects. Currently associated with Equate Petrochemical Company, Kuwait

Computer knowledge, documentation, teaching, research works and quick learner.

I am a mechanical Engineering graduate having seven years of experience in Petroleum storage terminal.

Exploration Geologit experience in Gold, Base metal Experience

Facilitator for maintenance departments. Business Process mapping, maintenance performance assessment, Installed and directed a successful planned maintenance system that has improved equipment availability and significantly decreased direct operation cost. Meeting federal and state environmental re

Ngondi Bessala is a Senior geologist with more than 20 years experience as Exploration Geologist, Operations geologist and wellsite geologist with major companies Elf then Total, Conoco Phillips as consultant, with independants Perenco, Maurel & Prom, Addax Petroleum and CMS energy

I have 3 yrs experience as a Mud Engineer and a landscape irrigation license. I am also working toward a Masters in Project Management

Perform a loop checking to check the data output from Field to DCS should be no Tolerance and Testing the Integrity of the Loop and the operation of any recorders or similar devices installed in the loop.

Diploma mechanical eng.

Seeking a suitable challenging position in the field of Electronic & Telecom Engineering which gives scope for future growth and learning opportunities.

hold a Bachelor's Degree in Biomedical Engineering ,

15yrs In the Indian Navy as a Hydrographic Surveyor, served onboard various Indian Naval Surveying Ships and four years as a Hydrographic Surveyor with Fugro India Pvt Ltd worked on various survey ships and offshore construction Barges in oil and gas field.

Very Good Experience in Honeywell DCS,Safety Manager

„Ï 9+ years experience in PRODUCTION FIELD.

Hplc Chemist,Responsible for Research & development of Analytical chemistry methods

Good organizational & management skills and able to work in team environment and independently.

Free! I come with17 yrs exp in the technical, operational and management aspects of Well Completions in the Oil & Gas industry. I am interested in rewarding and challenging opportunities as a Completions / Well Services / Well Test Consultant where I can contribute from my wealth of experience.

Heavy Duty Mechanic

EHS Management Expert with 14+ years of Experience

A seasoned professional with rich experience of 3.5 years in the areas of process engineering, equipment erection and commissioning with specialisation in the area of Oil and Gas Industry.

My training as a professional Accountant, coupled with my three years on-hand experience as an ‘Finance / Operations Officer’. (B.Sc Accounting and PE II ICAN)

Work as Instrument Technician in oil & gas for almost 9 years. Familiar with most of the instrument and equipment for calibration. Work with Petronas,Malaysia before and now with Ras Gas,Qatar.

I am 42 years old and Master Degree, currently I am still working for Valeinco as Logistic Manager and I ahave many experiences in Project Management such as Contract Services Manager, Project Manager and Project Coordinator and with my experiences I am confidence to be one of your candidate/staff.

I skill work the wireline logging services onshore and offshore.Experience prepare and maintenance tool pre-job and post-job,rig up and rig down, logging open hole,case hole,production logging,fishing tool,perforating and logging TLC ( logging with drillpipe ).

Senior level Operator with strong computer skills, team building strength, and highly adaptable.

Electrical Engineer

Detail Driven Engineer with an experience of 3 years. Diploma in Mechanical Engineering and a track record of success in consistent achievement of engineering project goals.

Maintenance and Commissioning of Process control Instruments in Oil and gas Plant.Trouble shooting and faultfinding of ESD and DCS loops.Servicing and calibration of Control valves,pressure,flow,temperature,level control instruments.

Primavera P6/P3, MS Project, MS Office

2+ years of experience in Automation field. Currently working as Executive Engineer in M/s.Yokogawa India Limited

GRAUDATE.AND DIPLOMA HOLDER IN INDUSTRIAL SAFETY MANAGEMENT AND ALSO HAVE 6 YEARS 4 MONTHS EXPERIENCE.

NDT level II, piping fabrication and errection, welding inspection etc.

9 years experience in production operator (oil and gas field) at present i am working in sudan

Analytical chemistry lab-skills for testing materials in quantitative and qualitative purpose with conventional or instrumentation techniques (UV-VIS, Atomic Absorbance and Infra Red Spectrophotometry, High Performance Liquid Chromatography, Gas Chromatography, Flamephotometry.

20 years of HR experience in recruitment, remuneration, pay structure development, performance management, job evaluation, benefits, organizational design, employee relations, database management, leadership, management, facilitation, coordination

I have over 36 years in the Oil & Gas Industry. International experience on land & offshore. Experience in remote location logistics. Have worked in desert, mountains, & jungle. Have drilled HTHP wells with oil base mud. Experience drilling horizontal & underbalanced. Spanish Speaking.

Bachelor in Engineering - Metallurgical Engineering.

Preparation of Techno-Commercial Proposal for various LSTK Projects like, Refineries, Petro-Chemical Companies, Steel Plants, Power Plants, Oil Bulk Plants, Gas Plants, Substations, Cable Laying, Plant Utilities and Various Industrial Projects.

Diploma in Chemical Engineering

BE in Mechanical Engr

Design Engineer-Static Equipments with 4 years Experience

Ensuring good quality control of mud system by analysis of drilling Mud additives

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 [ 124 ] 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out