Resume - Debasis is a geotechnical engineer and numerical modelling specialist within Sco...

Misco Jobs

Resume #87837

CONTACT INFORMATION:
View contact information...

Date of Birth 04/05/1974 Nationality INDIAN

Education:
Masters in Civil Engineering (Specialisation in Soil Mechanics & Foundation Engineering), Jadavpur University, Kolkata, 1999 (India)

Bachelor's in Civil Engineering, North Bengal University, West Bengal, 1997 (India)
Employment details
Employer SCOTT WILSON LTD, BIRMINGHAM, UK
Year July 2008 to Contd-

Projects handled

1. Tsuen Wan Drainage Tunnel, Hong Kong
Activities Performed/ Detailed Task Assigned
Finite Element modelling and SCL temporary support design for 5km, 6.5m ID drainage tunnel, inlet caverns and access adits in mixed ground conditions. Numerical analysis of tunnels at critical stretches based on rock cover, identifying the critical parameters for design, identifying the zones of potential failures, planning excavation sequences and providing numerical modelling inputs for design of tunnel linings. Analysis was also carried out on critical intersections with multiple openings to identify the potential failure zones in rock pillars between openings as part of this detailed design. All analyses were performed using Phase2 FE software.

2. A41 Expressway, Sandwell Metropolitan Borough Council
Activities Performed/ Detailed Task Assigned
Checking capacity of bored piles under foundations of footbridge for both axial and uplift loadings.
Checking forces and movements in secant piled walls, supporting vertical walls in excavated areas using PLAXIS.
CAT II check of secant pile walls, steel sheet pile walls, Bridge foundation bearing capacity & settlement along different sections of Grade separation interchange.

3. Westbourne Park-Crossrail Project
Activities Performed/ Detailed Task Assigned Performed preliminary analysis of contiguous bored pile wall using WALLAP at different sections to evaluate stiffness, deflections of wall and predicting moments and forces in wall. Also performed detailed FEM analysis of wall sections at different retained heights using Plaxis.
Detailed analysis of pile group using Repute software to support new gantry girder legs.
4. Tottenham Court Road Station Upgrade, Crossrail Project
Activities Performed Geotechnical modelling of new SCL tunnels in London Clay for independent CAT III design checks. Finite Element analysis of complex cross-sections comprising multiple new SCL tunnels, existing London Underground Tunnels and new deep excavations for ticket hall structures. Assessment of tunnelling induced ground movements and the impact of tunnelling on existing tunnels including existing cast iron-lined escalator barrels. Analysis was carried out using Plaxis software to provide lining forces and moments for stability and structural lining checks.

5. Humber Gateway: Metmast (Seawind Group)
Activities Performed Analysis of Monopile supporting Met Mast for an offshore wind farm using ALP & LPILE softwares.

6. M1 widening scheme, Highways Agency
Activities Performed Analysis of wall sections along highway alignment for different retained heights & options. Identifying geotechnical design parameters, methodology, risks and construction considerations. Preparing summary reports to assign geotechnical design parameters, forces & movements in wall sections along with preparation of risk register.

7. Liverpool Street Powerlink- Crossrail project
Activities Performed Geotechnical interpretation and Finite Element (FE) modelling of primary and secondary SCL support for the independent Category III design check on a new SCL cable tunnel and shaft linking into existing underground infrastructure at Liverpool Street Station. Numerical modelling was carried out using the Plaxis software to model the excavation and installation of SCL support in several stages and to assess the forces and moments exerted on primary and secondary support.
Analysis included consideration of the transmission of loading onto the sprayed lining against early-age strength gain of the SCL as well as modelling of permanent SCL support under long-term loading. Sprayed concrete linings for the shaft and tunnel are to be formed using steel fibre reinforced concrete.

Employer SMEC INDIA PVT LTD
Position Held Geotechnical Engineer
Year Feb 2007 to July 2008
Activities Performed/ Detailed Task Assigned
Kameng Hydroelectric Project
Review of failure on Powerhouse excavation cut slope and re-design of proposed slope stabilisation methodology by Slip circle analysis using SLOPE/W software. Also performed design of bored piles for slope stabilisation including preparation of design report and specifications.
Rhotang Pass Highway Tunnel
Review of Geotechnical inputs for Numerical analysis on proposed X-section of tunnel.

Srinagar Hydroelectric Project
Preparation of slope stabilisation reports on cutting of proposed powerhouse slope, Preparation of spreadsheets for Plane wedge analysis and wedge analysis by SWEDGE software.
Preparation of slope stabilisation reports on cutting of proposed dam excavation cut slope, Preparation of spreadsheets for Plane wedge analysis and wedge analysis by SWEDGE software.
Numerical modelling and analysis SCL supported head race tunnel intake portals, transition, junctions and main tunnels. Design work included recommendations for excavation sequences and support recommendations with analysis carried out using Phase2 software.
Check of Slope cuts by SLOPE/W software for excavation profiles in construction areas.
Panan Hydroelectric Project
Design of concrete liner of HRT tunnel for hydro project as per Bedded Beam model using STAAD PRO '05.
Preparation of report on foundation improvement of CFRD dam using Vibroflotation method.

Employer MOTT MACDONALD (INDIA) Pvt. Ltd
Year June' 2006 TO Jan' 07
Position Held Senior Engineer
Activities Performed/ Detailed Task Assigned
Luhri Hydroelectric Power Project, (700 MW)
Preparation of estimation of HRT tunnels against different options of studies, preliminary cost analysis, and theoretical gauge-discharge curve, Energy calculations at 90% & 50% dependable year, preparations of tender documents for geotechnical investigations and topographic surveys. Construction planning & Schedule of tunnels regarding DPR preparations.
Middle Vaitarna Hydroelectric Power Project, (51 MW)
Reviewal of feasibility report including cost analysis, power study and water availability.

Employer NATIONAL HYDRO ELECTRIC POWER CORPORATION LTD.
Name of Project Subansiri Lower H.E. Project.(2000 MW)
Year June' 2001 TO May' 2006
Position Held Engineer
Activities Performed/ Detailed Task Assigned
Modelling, numerical analysis and design for SCL and in-situ concrete linings to hydroelectric tunnels. Numerical analysis of junctions along pressure shaft with prediction of displacement values and extent of failure zones. Analysis of displacement and prediction of plastic zones at junctions of surge chamber and head race tunnels using FLAC3D software. Analysis of displacement and prediction of plastic zones at junctions of twin underground head race tunnels in highly stressed regions.
Analysis and structural design of diversion tunnel inlet using bedded beam models.
Development of the excavation sequence and support measures for surge chamber along with design of necessary support. Analysis of excavation and support using FLAC and Phase 2 software.
Preparation of Finite Element models for underground caverns in weak rock. Interpretation of modelling results to develop optimum support design along with criteria to monitor deformations and extent of yielded mass. Analysis of excavation using FLAC and Phase 2 software.
Development of estimated quantities for excavation, in-situ concrete, SCL, reinforcement and other support arrangements for a variety of underground structures.

Employer CONSULTING ENGINEERING SERVICES (INDIA) PVT LTD
Year May' 1999 TO May' 2001
Position Held Assistant Engineer
Activities Performed/ Detailed Task Assigned

Hinduja Thermal Power Plant
Supervision of Subsoil investigation including Rock drilling, Quality control works for earth filling and compaction. Conducting meeting with the client for approval of design and drawing
Panagarh-Palsit Road Section (NH-2)
Supervision of Subsoil investigation including Rock drilling
Investigation of existing pavement along with performance of in-situ tests in sub grade, Pavement and Materials report preparations,
Identification of borrow and quarry sites for new pavement construction,
Geotechnical calculations to check bearing capacity under open and deep foundations, High embankment design using Bishop's method.
HVM Expressway
Supervision of Subsoil investigation including Rock drilling along the existing alignment of HVM Expressway.
Mechada-Haldia Road Section (NH-41)
Supervision of Subsoil investigation including Rock drilling
Investigation of existing pavement along with performance of in-situ tests in sub grade, Pavement and Materials report preparations,
Identification of borrow and quarry sites for new pavement construction,
Geotechnical calculations to check bearing capacity under open and deep foundations, High embankment design using Bishop's method.

REFERENCES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1351 to 1400 of 15494)

Go to Search Parameters...

Brief Description

Efficient and Self-motivated Process Personnel

NAME SANJEEV S. KULKARNI QUALIFICATION : MECHANICAL ENGINEERING EXPERIENCE : TOTAL 25 years oil field

Refinery process engineer

i worked in a mudlogging unit for 13 years; i'm a unit manager , i'm IWCF Certified, i know deeply all the drilling operations

Petrochemical Engineer seeks challenging assignment in Middle East

I am a successful, experienced and qualified Start up Specialist, Commissioning Production Supervisor, FPSO Trainer with over 28 years extensive experience (both onshore and offshore) within the oil, gas & petrochemical industry.

Successful manager of operations, projects and people.

Fifteen years experience in leading teams towards effective energy efficiency and Demand Side Management campaigns in petroleum refineries,industrial, commercial and residential sectors. Career tenure included: National Energy Conservation Program (IAC-Industrial Assessment Program)

Topsides Manager..FPSO

heavy equipment operator sewer and water forman

with extensive experience in maintenance planning work, can initiate strathegic planning. with good knowledge in mechanical works and handled planning work on stationary and mobile fleet machines.

Experienced Mining Guru(Mine Overseer) with an educational career spanning 23 years, with a myriad of capacities and skills in underground Gold and Platinum hard rock mining.

Senior Operator with 14 years experience in refinery , Oil&Gas and petrochemical plants

I have many years experience in design (Solidworks), documentation, and manufacturing of high resolution medical ultrasound imaging equipment, as well as extensive experience in industrial automation components and systems.

Project/site /operations manager

Free! Supply,procurement,cataloger,material control,logistics,warehouse,contracts administration, SAPR3MM,expediting,inventory control

Exploration and Project with expirience on MapInfo DB managment Geologist

experienced drilling blasting supervisor competent in all aspects of blasting tecniques

Qualified Operator

Purchasing Qualified with extensive experience in the Oil & Gas Offshore Market

25 Year Sr. Drilling Supervisor, Domestic & International, Land & Offshore

17 years experience covering all aspects of Structural, Design, Management, and Construction. Working through various positions from the shop floor as Superintendent Draughtsman, Designer, Lead Structure designer and Checker, Project Engineer, Site engineer, Quality control and Bidding. Working for

Offering Extensive Experience in Industrial Electrical/Instrument Equipment And Systems.

Debasis is a geotechnical engineer and numerical modelling specialist within Scott Wilson’s Ground Engineering team. He is currently responsible for numerical modelling and geotechnical design input for tunnel linings, retaining structures and earthworks working on a variety of infrastructure sche

Free! 25 years miner operator, 2 years supervisor

electrical engineer

I have been in the Oil & Gas and Real Estate Industry for 23 years. I have attended all required courses for Real Estate along with Real Property Law for both Oklahoma and Texas. My experience has been in Oklahoma and Texas.

Instrument technician I am the former employees of one of manure / fertilizer company biggest in Indonesia.experience my job 25 yeard ( start December 1982 up to April 2008 ) area of fild instrumentation proces work responsibility : technician of calibration, loop

hi looking for job

Welder-fitter with over 20 years experience, supervisor, quality control experience, CWB certified. Dependable, hard worker, will travel.

Professional individual having Soil Investigation, Soil Improvement, Diaphragm wall construction, Quay wall construction, Piling, Drilling Techniques (All Types) Geotechnical Special Testing, Material Testing, Geotechnical & structural Instrumentation & Geological Mapping skills.

Experienced as chief operator, outside operator, control room operator, operator trainer and procedure writer. I have been involved in new facilities from checkout, pre-commissioning, commissioning and routine operation.

Electric Engineer

Exploration Geologist

Certtified hygienist with more than 30 years of experience. Presently working both onshore and offshore in the Middle East. Qualified OHSAS 18001 auditor. Masters degrees in both Occupational Health & Environmental Management. Excellent interpersonal skills. Looking for challenging position.

International Project Management Residential Commercial Industrial

Key Competencies: over 20 years of experience in technical jobs: On shore, Oil, Gas and petrochemical and Power Plant Industries involved in Project Management, Commissioning Maintenance and repair, Lubeoil/seal oil flushing of compressors and pumps, QA/QC rotary and static equipments, etc.

Dip Elect & Mech Engineering + LLB + MBA

Senior Mechanical Engineer (Projects/ Engineering / Design). I have diversified experience of about twenty-four (24) years in the field of Design & Projects Construction of Gas & Oil Production(onshore / offshore), Artificial Gas Lift, Water Flood and Oil Refining.

Well-experienced in QA/QC, NDT, DT & PWHT activities

Results-driven Senior Level UNIX/Linux Systems Administrator/Systems Engineer with broad-based experience in oil and gas, banking and government agencies. Accomplished professional who has an extensive history in the installation, troubleshooting, support and development of oil and gas apps.

I provide professional pipeline engineering skills for the owner firms

Project Manager, BTech Business Management Degree, Trade Tested Fitter.

HSE Management / HSE Adviser. HSE management of Contractors... EPC Construction & Commissioning... On-shore, Off-shore Rig / platform experience / Hook-ups, shutdowns... Senior Fire Training Officer... Mech.Eng

Over fifteen years experience as Certified Business Continuity Professional with over ten years experience as Project Management,Technical Writer and trainer and over a year as a SEI/CMMI Auditor, completing projects ontime and within budget.

Multifaceted, driven, and highly motivated professional seeks a Senior Level Drilling Engineering position in a dynamic and high-paced environment.

I am in Saudi Arabia working for a reputed company since 15 years as a bio-medical eng. with matter of broad future and to learn new technology i would like to switch to other company.iam in need of visa too.so as to go and comeback again.

Worked in IMECO (International Mechanical & Electrical Company) UAE as a Asset Management Specialist to manage & controlled Electro-Mechanical Data using by Maximo. Provide data on-time as per the requirement of the Departments, users & Oil Companies.

Gold Medalist from Indian School of Mines, Dhanbad and PGDM (Exe. in Manf.) from IIM Calcutta. More than seven years of experience in mining industry with proven expertise.

15+ years of IT experience and 6 years of SAP BWv7 and SAP R/3 ABAP experience. I would like to introduce myself as a Consultant, having an Attitude & Aptitude for Analysis, with range of skills in Technical arena. I do have solid Experience in Conceptualizing, Developing.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 [ 28 ] 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out