Resume - Design, collaborative Industrial design, product development, rapid prototyping,...

Misco Jobs

Resume #87856

CONTACT INFORMATION:
View contact information...

Designer

QUALIFICATIONS PROFILE
Mechanical /Electro-Mechanical Design utilizing CAD, featuring Solid Modeling, Surfacing, Flat Pattern generation in the creation of sheet metal parts, machined, stamped, welded, cast, injection molded, blowmolded, rotomolded, vacuformed, extruded, wire formed weldments, various aerospace related techniques, and fixture design.

WORK RELATED HISTORY

5/08 to 10/08– Caterpillar Wheel Loaders, Aurora, IL. Contract Position. Assigned to Light Fab Group within Medium Wheel Loaders. My responsibilities included Design for new product introduction of Roading Fenders. These sheet metal fenders are hinged to be swung out of the way during engine service. Guide, Latch, and Latch Release assemblies are components of these designs. Softwares used: Pro/Engineer Wildfire, Microsoft Sharepoint, Powerpoint, and Team Center.

11/07 to 2/08 – A.F.S.I. (Advanced Filtration Systems Inc.) Work performed at Donaldson's plant in Bloomington, MN. Contract Position. Assigned to joint venture project between Caterpillar and Donaldson: Die Cast/Injection Molded parts and assemblies in the Liquid Filtration group. Both legacy and design from scratch situations. Housings, endcaps, center tubes out of super-tough Nylon; Collection bowls: Lexan; Cast/Machined Heads: 380 Aluminum. Spin welding, urethane potting of filter media at sub assembly levels. Softwares used: Pro/E Wildfire, and Microsoft Sharepoint.

8/07 to 10/07 – Panasonic Home Appliance, Danville, KY. Contract Position. Assigned to work between the Marketing/Industrial Design group and the Engineering Management Team in Upright/Cannister Vacuums. Project assignment: turn the Industrial Design roughs of an Upright's new Dust Cover into a Moldable Pro/E Database to be tooled in China or Mexico. This included a molded Latch and spring mechanism. Surface modeling used as a design tool. Softwares used: Pro/Engineer Wildfire and Intralink. SLA/SLS capability onsite for quick Prototype availability and Working Model construct.

2/07 to 7/07– Trane Corporation – Technology Center, Lacrosse, WI. Contract Position. Assigned to the Controls Group. Trane is a HVAC manufacturer of whole building climactic systems, both Commercial and Consumer. My responsibilities included Plastic Part Design of wall mounted Control Boxes; which includes Light Pipes (Polycarbonate), Keypads (Silicon Rubber), Bezels (Noryl), and Layout of various Printed Circuit Board Componentry in the constant interplay between the Controls Group and the Software Design and Printed Circuit Board Design Groups. Softwares used: Pro/Engineer Wildfire and Intralink.

1/06 to 1/07 – Polaris Industries Research and Development Center, Wyoming, MN. Contract Position. Assigned to Victory Motorcycle Division. My responsibilities: Chrome Disk (Brake Rotor) Cover, Saddlebag Assemblies (including molded liners, cargo netting, etc); Mini-Apes Handlebar, Cush Cast Rear Wheel Assembly, Cush Billet Rear Wheel Assembly, Foglight Assembly; as well as supporting Test Engineering with Fixtures such as a Welded Bike Frame Stress Fixture, and smaller fixtures such as Lit Badge (Victory Logo w/LED backlighting) Shake Fixture. Softwares used: Pro/E Wildfire, Intralink, and Windchill.

10/05 to 1/06 – Graco, Mpls., MN. Contract Position. Graco is a manufacturer of Fluid Handling technologies. My responsibilities were with the Tooling Design group at the Riverside Plant in North East Minneapolis: Tooling and Fixture design such as Screwdriver Fixture for torqueing two different size ball valves into Filter Manifolds; O-ring Installation Tool for assembly of a spring loaded poppet valve, and various smaller fixtures. Softwares used: Pro/Engineer Wildfire, Metaphase, and Altris.

5/05 to 10/05 – Cirrus Design Corporation, Duluth, MN. Contract Position. Cirrus Design is a manufacturer of single engine fixed wing four-seater aircraft using state of the art composite materials. My responsibilities were with the Systems group specifically to cost reduce the air conditioning system. Tasks included Design and Detail of Molded Ductwork, High Pressure Hose, Tubing, as well as Sheet Metal parts. Reverse Engineering/Layout/Detailing of Compressor/Air Conditioning Components. Design/Detail/Rapid Prototyping of Belt Housing and Compressor Bracketry in the Firewall Forward area. Design/Layout/Detail of components used in the Seating, Radio Module, and Interior Finish areas in response to controls/duct/vent changes. Software used: Pro/Engineer Wildfire and Intralink.

11/03 to 1/05 – General Dynamics, Bloomington, MN. Contract Position. General Dynamics is a Defense Industry supplier of ruggedized onboard Computing devices for command-and-control functions in air, land, sea, and space applications. My responsibilities include Mechanical Design, Source Control (Purchased Part Library) Pro/E Modeling, ECN's, Checking, and various project work as required. Large Assembly Management, Family Table Creation, Simplified Rep creation and update, and Exploded State creation and update. Sofwares used: Pro/Engineer Wildfire, Intralink, Metaphase, CIMA, and VizView.

3/01 to 6/03 - Ecowater Systems. Woodbury, MN. Direct Position. Ecowater is a Water Softening and Purification company. All their product is Injection Molded in-house. Assemblies are generally Snap-together with few fasteners. My responsibilities included Product Development, Design, Surfacing, Layout, Detail, CAD Model Repair, Tooling related changes, and change orders on both Softeners and Reverse Osmosis Product Lines. Software used: Pro/Engineer, Autocad, J.D. Edwards, AutoDesk View, and Volo View.

6/00 to 3/01 - Imation. Oakdale, MN. Contract Position. Imation is a data-to-tape or data-to-disk storage company. I was involved in Design, Layout, and Detail of projects. I worked both with the DLT Cartridge Group dealing with precision injection molded parts, and with the Servo Writer Group working with Magnetic Tape Head related issues including Tape Head Actuation.
Software used: Pro/Engineer, Intralink, and Matrix.

4/00 to 6/00 - Graco. Mpls., MN. Contract Position. Graco releases all new product at the end of fiscal year and typically uses contract people to meet these deadlines. Graco is an Industrial Coating and Lubrication Applications company. My duties included Continuation Engineering tasks and Reverse Engineering by modeling Pro/E Assemblies and creating exploded assembly documentation of a newly acquired offshore manufactured Hose Reel product line to be Private Labeled for New Product Introduction. Software used: Pro/Engineer, Metaphase, and Altris.

2/00 to 4/00 - Kohler Co. Kohler, WI. Contract Position. Kohler is a Bath and Kitchen fixture manufacturer. Kohler was mainly interested in my Surfacing experience and training and my use of Alias software in the startup/tooling up of the Presque Isle Tub project. My duties included Surfacing, Reverse Engineering, Design, Assembly Details, BOM's, and Exploded Views in the Bath/Whirlpool group. Software used: Pro/Engineer, Unix, CMS, SAP, and Alias.

9/99 to 11/99 - Toro Corporation, Product Development Lab. Bloomington, MN. Contract Position. This was a short term contract to allow the main CNC Setup/Programmer to assist in a company-wide SAP implememtation. Toro is a Commercial and Consumer Lawncare and Snow Removal Equipment Manufacturer. Worked for the Product Development Lab working with various Design Groups in moving all CAD models through File Format Translation, Nesting, Programming, and Post Processing for an Amada Laser Cutter to create prototype parts for fabrication and assembly. Part and Weldment CAD model repair, and drawing creation with Pro/Engineer. Software used: Pro/Engineer, Metalsoft, Computervision, and Oracle.

5/99 to 8/99 - IMI Cornelius, Mason City, Iowa. Contract Position. IMI Cornelius is a manufacturer of Icemakers and Beverage Dispensing equipment. I was brought in because of my Surfacing experience and training to work on their new line of Rotomolded Ice Bins. Their engineering group previous to that was basically a sheet metal based group making stainless steel bins with not a lot of Pro/Engineer Surfacing and complex geometry experience.Software used: Pro/Engineer, AutoCAD, and Cadview.

1/99 to 5/99 - Central Lakes College, Staples MN. I audited their Mechanical Design Program featuring the use of Pro/Engineer, AutoCad, and Master Cam softwares. Areas of study were: Pro/Surface, Pro/Mold, Pro/Sheet Metal, Plastic Part design using Pro/E, CNC applications (Pro/E surface models-to-Mastercam), Machine Design ( project set up by Caterpillar), Geometric Tolerancing (w/1994 additions), and Injection Mold Theory.

5/91 to 8/98 - Wagner Spray Tech (Commercial/Industrial Division). Plymouth, MN. Direct Position. Wagner manufactures Paint Application Equipment. Design, Solid Modeling, Surfacing, Rapid Prototyping, and Detailing in both the Piston Pump/Airless and HVLP (High Volume/Low Pressure) Groups. Design/Detail of Pulse Width Modulation Control Housing Assembly (Liquid Cooled) with External Operator Control Box Assembly in a joint venture with Extron Corporation (designer of the Circuit Boards) for future use in DC Electric Motor Piston Pumps. Design-in-Assembly/Rapid Prototype/Detail of Die Cast Control Housing and Molded Plastic Cover. This included Master Layouts with Circuit Cards, adjustable Micro Switches, Spring/Plunger Assemblies, Control Knobs/Switches, Wire Harnesses, cast-in-housing High Pressure Manifold, etc. Softwares used: Pro/Engineer, Computervision, AutoCAD, and J.D. Edwards.

EDUCATION
* Univ. of Minnesota – B.A.
* Regents Scholarship: coursework as an employee of Minneapolis College of Art and Design – Investment casting.
* Minneapolis Drafting School - Associates Degree, Mechanical/Electrical Drafting.
* Digital Resources, Mpls, MN - AutoCAD Training.
* Central Lakes College, Staples, MN – Audited Pro/E Mechanical Design Program
* Quannon Corporation, Mpls, MN - Autocad Advanced Training
* Fishbowl Corporation, Mpls, MN – Wildfire Training, Intralink Training.
* Synvent Corporation, Burnsville, MN – Pro/E Wildfire ISDX Training

COMPUTER SKILLS
* Over ten years of Pro Engineer usage. Currently working with Wildfire releases 3.0 and 4.0.
* Longtime use of Excel, Word, Outlook, and PowerPoint.
* Solidworks is on my laptop. Have experience with '05, currently training with '09.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8651 to 8700 of 15343)

Go to Search Parameters...

Brief Description

Design/Detail engineering, inspection , erection & commissioning of Oil & Gas Plant,Agro-Chemical industry, Refinery, Pharmaceutical industry involving PLC & DCS system, fire alarm system, access control system, CCTV system ,Public address system, local control panel & field instruments like pH met

6+ years of experience in Reservoir Engineering and Oil Industry.

Drilling specialist and Mech. diesel fitter

Experienced Civil / Structural Engineer

Responsible for on and offshore site planing for well testing operations job logistics and personnel movements. Working in a wide range of environments and positions around the world. Responsible for the safety of the crew, the accurate reporting of operations and morning reports, preparing the corr

Over 20 years experience

Wireline Operator/Supervisor

9 yrs of experience in people management, time management coordination.

I have 18 years experience in the Oil Service Industry, involved in all aspects of Coiled Tubing, Nitrogen Services, Fluid Pumping, N2/He Leaktesting(HLD), Pipeline Pigging/Testing & Well Testing. My last permanent position was Service Supervisor II for Halliburton Coiled Tubing in Australia. Since

25+ years experience

20+ years oilfield experience, excellent work ethic - personal skills - time management, own truck with commercial insurance and plates, current tickets

Inspection Coordinator / Welding Inspector

Technical skilled person for supervising piping /construction projects

A state Engineer in refining

30 years experience in the pipeline field, which includes- bidding jobs, safety procedures, quality control, facility installation, environmental knowledge, welding procedures, know procedures for filling out ground disturbance, hot and cold safe work agreements and confined space entries

CNC programming, unigraphics NX4/5, Catia V5, Autocad

I am a mig welder that is a harder worker that is willing t o learned new skills to become a better overall welder.

I have a degree in bachalor of engineering, in mechanical engineering discipline. i will be able to perform effectively if i am being taken

NDT Level II - UT / RT / MPT & LPT - Sr. NDT Tech.

Design, collaborative Industrial design, product development, rapid prototyping, surfacing, drafting, Pro/E, Solidworks, plastics, sheet metal, die cast, machining, weldments, tooling, GD&T, analysis, concepting, presentation, project management tools, materials sourcing, costing, vendor interface

Experienced Opito Level 3 offshore rigger with additional safety and working at height training.

Construction Manager with 22-years experience in Mechanical Construction discipline for Industrial Projects (Oil & Gas, Refineries, Petrochemical Project and Power Plant Projects).

I hold a BSc in Engineering and have extensive experience in procurement and contracts activities in the upstream oil and gas projects. I seek an employment in the Middle East region as Senior Procurement /Contracts Engineer.

Engineering manager, Planning, Contracts and administration. Production engineering a specialty.

Sales Management Executive providing leadership in hiring, directing, and motivating a sales force consisting of direct / indirect channels in the pursuit of increasing revenue, profitability, and market share.

MAINTENENCES MANAGEMENT OF HEAVY EARTH MOVING AND CONSTRUTION EQUIPMENT

Experiance in Detailed engineering, System Engineeering (PLC ,SCADA,DCS) FEED study, instrument selection, BOM preperation, Hotcutover, start up and commissioning, engineering and feild engineering

Autocad programming(VB, Visual Lisp, AutoLisp), Database, Report Generation (Crystal Reports, Active Reports)

I am a construction engineer having experience of more than 3 years in multi storey building construction

PDS Modelling, Microstation & ACAD 3d Modelling

Bachelor’s degree in Mechanical Engineering passed from N.E.D. University of Engineering and Technology Karachi in the year 1998

5 yrs extensive training and experience in PDS-EERaceway and Microstation, 8 yrs in Autocad

With 5 yrs experience, Chevron Indonesia, as a Petroleum/Reservoir Engineer. Activities include EOR optimization, reserves estimation, depletion plan, project management, reservoir surveillance, workovers, drilling programs, and artificial lift optimization.

M.S in petroleum geology and petroleum engineering. years working experience in reservoir characterization, formatioin evaluation in industry. knowledge in reservoir simulation, prduction and drilling engineering.

Power Station Chemist in the Philippines with experience in power plant desalination and ultrapure water treatment, corrosion issues, water/steam purity control, fuel gas and oil chemistry and engineering projects related to power plant chemistry.

I have completed my graduation in Computer Science. Have worked with Bell Canada as a Tech support Customer Representative. Right now working in a telecommunication Industry for Sony Ericsson as Software engineer.

engineer with excellent telecommunication knowledge

i am structural civil engineer from algeria and i have 9 years experience in such field, i speak and write both french and english

I have been involved in Health, Safety and Environment in excess of 25 years and I am an experienced and qualified Health and Safety Professional in a Construction, Oil /Gas, Drilling Off-shore and On, Aviation and Petrochemical environment. This has enabled me to undertake the following:

Chemical Engineer

29 years of Intergraph/Microstation, 9 years of AutoCad, 8 years of civil roadway design ,5 years InRoads, 4 years GeoPak, 3 years PDS/Frameworks, 2 years Bentley Structural TriForma

Aircraft maintenance engineer with turbine experience. AC/DC, hydraulics, pneumatics troubleshooting and maintenance. Vibration diagnostics and diagnostic software.

I do not have any experience. I want to make mining my career. I am very hard working, and want to mine until I retire. The only relative experience that I have is construction. I worked construction in Las Vegas for one summer.

Characterization of locations for production studies. Static models Generation. Seismic interpreter. Professional development toward the coordination of technical teams. Flexible to work under different technological platforms and interpretation (Geology, Geophysics and Petrophysics)

i m working in huawei technologies pakistan from 26/9/06 as site engineer and 2 times promoted as quality control engineer and civil work manager

Im newly graduate of Bachelor of Science in Industrial Technology major in Computer Technology.... of course i am a commputer literate, software (such as MS Word, MS Power Point, MS Publisher),Assembling & Disassembling System Unit,Knowledgeable in Basic Programming (such as HTML & JavaScript)

I have extensive mining and heavy equipment operator experience and training.

Design and development of civil and structural engineering projects. / Effective management of crews during field testing and inspections. Design and development of several mechanical engineering projects in an industrial chemical plant.

pipe fitter,6G certified gtaw& smaw welder ,field experience, saudi arabia Aramco project, Malaysia liquified natural gas under hyundai constraction, kellogs proponent , petron bataan refinery Philippines

3D Modeling, FEA, ANSYS, GTSTRUDL, STAAD, RAM, RISA, CAESAR II. USA, British, Euro, China, Russia Codes and Industries Standards.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 [ 174 ] 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out