Resume - Highway Laboratory / QC Manager with 25 years experience in materials

Misco Jobs

Resume #88002

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To obtain a position as a Material Engineer / Constructions Laboratory Manager that will utilize my specialized skills and abilities in the area of construction and engineering.

PROFILE
Extensive experience of over 23 years in laboratory roads engineering, research and development, leadership and mentoring, testing and problem-solving. Was instrumental in the successful completion of four National Highway Projects in India, amongst others.

Key characteristics
Loyal and show a strong devotion to my employer and the goals of the company, good interpersonal skills and possess strong leadership expertise. Engage myself in the pursuit of knowledge and enjoy intellectual challenges. Responsible, diligent and industrious in my work. Decisive and work well under pressure and in high stress theatres. Excellent team player and result orientated.

Date of Birth: 25 November 1962
Nationality: Malaysian
Passport: A17599027
Languages: English, Malay, Tamil, Malayalam
Health: Fine
Criminal Offences: None
Current Location: Malaysia
Drivers License: Class: D (Light Motor Vehicle)
Computer Literate: Proficient and all Microsoft programmes and internet navigation

PROFESSIONAL EXPERIENCE
Laboratory Manager, Leighton Pvt Ltd, India, August 2006 to August 2009:
Strengthen and widen the existing two lane road to a four lane carriageway from Km 18 to Km 63 of NH 11 (Agra to Bharatpur) in the states of Rajasthan and Uttar Pradesh (India).
* Prepare all types of test formats for the Bureau of Indian Standards and carry out all types of laboratory testing of soil, aggregate, concrete and asphalt work to comply with specifications of the Bureau of Indian Standards.
* Identify borrow pit material to be used in construction; sample and test for quality control during construction.
* Prepare monthly progress report and Bar Charts to ensure progress is timely.
* Oversee the mix design of various grades of concrete and the Job Mix Formula for Asphalt Concrete (Bituminous Macadam, Dense Bituminous Macadam and Bituminous Concrete).
* Ensure that the calibration of lab equipment is done correctly.
* Oversee the application of spreading of asphalt concrete and test materials for compliance to the codes and specifications. Liaise with the Concessionaires and Independent Engineers on the quality of material or testing.
* Managed 35 subordinates to ensure that the testing of materials are comply to codes /procedure and completed on time; to ensure that no sub standard material are being used; to maintain proper test records and error free results; to guide and train the subordinates in proper handling/testing of material; and to ensure that the monthly lab test reports are timely and error free.
* Work closely with the QA Manager to adhere to the Work Method Statement as well as the Inspection and Test Plan.
Selected accomplishments
* Promoted from Laboratory Manager to QA/QC Manager in February 2008 for the remaining duration of the project.
* Was instrumental in obtaining the Commercial Operation Date for the completed project from the Independent Engineer (acts on behalf of National highway of India).

QA / QC Coordinator, UE Construction (UEDI), India, July 2002 to March 2006
In charge of the laboratory at the construction site of (1) 4/6 lane highway from Tuni to Anakapall in Andhra Pradesh, India, (BOT – Annuity Project, as well as ( 2) Western Corridor project for Sira to Chitradurga of the National Highway 4 in the state of Karnataka.
* Prepare all types of test formats for the Bureau of Indian Standards and carry out all types of laboratory testing of soil, aggregate, concrete and asphalt work to comply with specifications of Road, Transport and Highway (MORTH) of India.
* Identify borrow pit material to be used in construction; sample and test for quality control during construction.
* Prepare monthly progress report and Bar Charts to ensure progress is timely.
* Oversee the mix design of various grades of concrete including Dry Lean Concrete (DLC) and Paving Quality Concrete (PQC)
* Oversee the mix design for the Job Mix Formula for Asphalt Concrete (Bituminous Macadam, Dense Bituminous Macadam and Bituminous Concrete).
* Ensure that the calibration of lab equipments is done timely.
* Oversee the application of spreading of asphalt concrete and test materials for compliance to the codes and specifications. Liaise with the Subcontractors, Concessionaires as well as Independent Engineers on the quality of material or testing.
* Ensure that the quality of the road – consisting of Rigid and Flexible pavement – is maintained.

Quality Control Manager, IJM India Infrastructure, India, April 2001 to June 2002
Widen and rehabilitate existing 2 lane highway from Tada to Nellore Section of the National Highway 5 (NH 5) Andhra Pradesh, India.
* In charge of the main Laboratory as well as two site laboratories set up at the concrete batching plant and Hot Mix Plant respectively. Oversee the quality of work by the technicians at site laboratories and the correct and timely testing of materials to comply with specifications as stipulated by the Ministry of Road, Transport and Highway. (MORTH)
* Prepare all types of test formats for the Bureau of Indian Standards and carry out all types of laboratory testing of soil, aggregate, concrete and asphalt work to comply with specifications of Road, Transport and Highway (MORTH) of India.
* Identify borrow pit material to be used in construction; sample and test for quality control during construction.
* Prepare monthly progress report and Bar Charts to ensure progress is timely.
* Oversee the mix design of various grades of concrete and the Job Mix Formula for Asphalt Concrete (Bituminous Macadam, Dense Bituminous Macadam and Bituminous Concrete).
* Ensure that the calibration of lab equipment is done correctly.
* Oversee the application of spreading of asphalt concrete and test materials for compliance to the codes and specifications. Liaise with the Subcontractors, Concessionaires as well as Independent Engineers on the quality of material or testing.
* Ensure that the quality of the road – consisting of flexible pavement – is maintained.

Operation Executive, Soil Centralab Sdn Bhd, (Malaysia) Nov 1988 to Feb 2001
New Klang Valley Expressway
* Seconded to Minconsult Sdn Bhd for the above project in charge of field (in-situ) tests; laboratory testing; site supervision of earthworks, and CBM3 (Cement Bound Material).
* Supervise CRCP (Continuously Reinforced Concrete Pavement)
* Lay and establish design mix for Asphalt Concrete and Supervision of concrete batching plant.

New Klang straits Bypass
* Seconded to Jurutera Peruding Daya for the above Project in charge of laboratory testing of soil, asphalt concrete and aggregates.
* Conduct field density tests.
* Supervise earthworks and pavement works.
* Design mix for pavement works.

North South Expressway
* Oversee the soil investigation works for the Gopeng to Kampar stretch of the expressway. Monitor quality of work by the Sub contractor: meeting specifications of the drawings and keeping to the work schedule. Check that subordinates correctly identify the follow up work to ensure continuity of work.
* Monitor and control in the slope stabilization works for the Gopeng to Kampar stretch of the expressway, Jalan Duta, Pedas to Air Keroh, Kulai to Skudai and Changkat Jering.

TV3 complex (Wangsa Maju)
* Oversee the preliminary studies and soil investigation works prior to the construction. Ensure that correct locations are identified for the contractor to conduct boreholes. Ascertain the characteristics of underneath layers at various depths.

Waste disposal project (Bukit Nanas, Lukut)
* Assist Resident Engineer in the construction; oversee and check on the quality of work by the subcontractor. And that the work is done as per the drawings and specification.

National Sports Complex
* Manage six technicians who were seconded to the consultants for the National sports Complex and Games Village. Oversee the technicians conduct testing procedures correctly; stay on schedule, and understand given instructions to deliver output as expected by the Consultants.

Malaysia – Singapore Second crossing
* Manage eight technicians assigned to the consultants for the above project. Oversee the technicians conduct testing procedures correctly; stay on schedule, and understand given instructions to deliver output as expected by the Consultants.

Light Rail Transit (LRT) 2
* In charge of Central Testing Laboratory, a lab setup by Soil Centralab exclusively to test samples and cubes for Light Rail Transit project.

Senior Supervisor, Yean Tat Sdn Bhd, (MALAYSIA), April 1987 to Oct 1988
Improvement of the Cheroh to Raub trunk road.
* Supervise the construction of the earthworks and pavement works. Ensure that the soil layer thickness is within the limits.
* Monitor the compaction of material achieves the required density.
* Identify the borrow pits for soil to be used for Embankment and Sub grade.
* Ensure that the Asphalt material is laid within the specified temperature.
* Collaborate with the Hot Mix Plant to ensure that there is continuity of Asphalt material being dispatched.
* Liaise with the client and the main contractor to ensure that the work done is up to the specification and to the satisfaction of the client prior to proceeding the next layer of work.

Inspector of Works, Sepakat Setia Perunding Sdn Bhd, ( Consulting Engineers) Malaysia, August 1984 to February 1987
Senawang to Air Keroh Toll Expressway
* In charge of the setup and quality control of the testing done in the laboratory.
* Assist the Section Engineer in supervising the earthworks, drainage and bridge construction to comply with the specification.
* Assist the Lab Engineer on the quality control of the testing done in the laboratory such as field density tests, cube crushing, establishing of bitumen content and the marshal stability of premix, Mackintosh probes and testing of soil samples to comply with the various standards.

SPECIALIZED TRAINING
* QMS Internal Auditor Training Course by TQM International Pvt.Ltd – India; April 2008 (2 day course)
* QMS Auditor/Lead Auditor Training Course Lloyd's Register Quality Assurance (LRQA) - India. March 2009 (4 day course)

EDUCATION
* Sijil Pelajaran Malaysia High School Certification, S.M.K, Bangsar, 1980
* Diploma in Civil Engineering, Federal Institute of Technology, 1983

ASSOCIATION MEMBERSHIP
International Contractors Association (ICA) and I proudly subscribe to their professional Code of Conduct

REFERENCES

Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8101 to 8150 of 15341)

Go to Search Parameters...

Brief Description

AutoCAD, ADT,3 DS Viz, MSOffice, C, C++, Unix,ProE

Iam a postgraduate in Environment Management worked with various petrochemicals, chemical, pharmaceutical, bulk drugs and Oil & Gas E&P industry for the past 8 years in various countries. My experience has been as an Environment Engineer; Environmental Specialist; QHSE Engineer and EMS staff in

Am a fresh directional driller with background in well planning and borehole survey, i have ten years experience in various drilling position.

Automation engineering experience in oil and gas sector. Programming experience Hardware and software knowledge

Chemical Engineer with 11 years Experience in Process Engineering, Production in chemical industry

Job Objective To pursue a career with a major international industry. The position should offer career opportunities, expansion of knowledge and an immediate challenge

My qualifications are reinforced by over 20 years of Industrial Insulation as a front line supervisor. Multi-tasking for the past 5 years as a Painting Supervisor as well as Insulation Supervisor, has expanded my talents to a broader range that may well serve you better.

Engineering, cadd designer, autocad, microstation

Industrial Engineer, with more than 9 years Experience in Planning and Cost, in EPC and developmental projects, both onshore and offshore. Worked in Oil,Gas,Petroleum and Automotive field.

13 years Completion/Workover experience. Completion, sand control, fracturing, matrix acidizing design. Extensive project management experience including three assignments in operator's offices. Operations and engineering management experience.

project in erection, maintenance and up gradation project of 40 MW power station and

Assistant Product Engineer " Wafer Probing ang responsible for Yield improvement "

Hands on experience in Vibration Monitoring & Analysis of Plant Rotating equipment by the use of SKF Microlog 60 with SKF Prism4 1.35 & SKF Machine Analyst 2.2 vibration analysis and data management software. Familiarity with the data base creation, modification and report preparation using SKF MA

i m the student of BS GEOLOGY 7TH semester nd looking for job.

More than 8 years HSE experience.

1yr Apprenticeship in BHEL,Trichy

Desktop technician

Over 16 years of experience in leadership roles within complex operations, supervising diverse teams and managing challenging programs/assignments within U.S and international locations

A focused team oriented Petroleum Technologist who brings with a varied work experience in production line and Electrical and Electronics troubleshooting able to work in ambiguous and demanding situations with positive results.

Highway Laboratory / QC Manager with 25 years experience in materials

marine engineering steam ship,maintenance fitter,malaysia maritime academy

Good communication skills; Microsoft and Programming skills; B.Eng in Mechanical Engineering.

Electrical and electronics engineering

Metallurgist with heat treatment and quality control exp. as a technican.

Working knowledge of PLC's

A Safety Professional with a enthusiastic approach to Safety & Environmental issues, excellent communication skills, able to plan & prioritise busy management schedules while ensuring high visibility and involvement

I am a skilled solid tradesman with a solid family looking for interesting ,rewarding employment.

I am a B.Tech. (Applied Petroleum Engineering) from University of Petroleum and Energy Studies, Dehradun (India). Though I am not experienced but i have certain skills like I work well as part of a team andI find it easy to get on with people.

Diploma in Mechanical Engineering. (Good in Auto CAD Draughting and Designing)

Senior Weld Mgr / Engineer. I have for decades specialized in providing management support for the implementation of Best Weld Practices and the establishment of Weld Process Controls. I

Proven record of growth and success building businesses from start-up to profitable operations in highly competitive environments. Very skilled at identifying market opportunities and creating strategies to effectively exploit them. Proven success record setting strategic direction, executing to pl

I have 15 years of working experience with over 5 years in senior management positions with international companies in Asia.

Geological Mapping - surface and underground. GIS, 3D CAD/mine planning software, computer programming C, C++, Fortran. Rock Mass Stability - including mechanical and geophysical properties. Technical and business writing, public speaking, and teaching skills. Knowledge of seismic risk assessment.

Free! HSE Manager - Value Assurance Manager - Asset Integrity Manager

POSITIVE ATTITUDED, HARD WORKING

I have a post graduate degree in Petroleum and Gas Engineering; while preparing my thesis based on secondary oil recovery (Niger Delta),I work in collaboration with SPDC Nigeria. They provided me with data.I have skills also in drilling Engineering in areas of casing design and mud Engineering.

Electrical Engineer with experience in Engineering,Procurement and Construction

Contract working, supervision of dam construction, geological worlks etc.

Electrician and editor of substation

Experience in Mound storage pressure vessel construction, fabrication. ERP software application experience, Project execution, commissioning and operations.

SNR Supervisor & Superintendent experience currently working offshore

Able to repair and maintain the functionality of Auto/Heavy Equipment Electrical

Seeking a position in management with the opportunity for further career advancement through using sound judgment and personal performance. Will consider a staff position with opportunity for advancement.

I have a TWIC and Safety card, currently looking for offshore and overseas posistions.

To obtain a full time career that will enable me to utilize my skills and abilities. To also have the opportunity and availability for advancement with the company.

I am process engineer for vertical batch annealing line have 7 years experience, Training Courses(communication skills - business writing - problem solving and decision making - fundamentals and statistics analysis)

BS biomedical engineering, looking for a job where i can use my knowledge and skills to overcome the problems.

I’m currently on an M.Sc progamme in Petroleum Engineering at Heriot-Watt University, Dubai campus, I hold a B.Sc. Degree in Geology from the University of Legon, Ghana.

Indonesian Citizen healthy, 32 year’s of age, Certified Welding Specialist for last of ten (10) years, GTAW-SMAW: SS,CS,Duplex SS.

Qualified electrician - Electrical Technician - Diploma - Busy with btech degree

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 [ 163 ] 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out