Resume - M.Tech-Control Systems Engineer with 2 years of Experience in Teaching and Proje...

Misco Jobs

Resume #88011

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVE:

To work in a professional environment where my skills and abilities can be utilized and enhanced towards the growth of the organization.

ACADEMIC RECORD:

1. M.Tech in Control Systems from the University College of Engineering, JNTU, Anantapur with a percentage of 74.5% First Class with Distinction grade during 2006-2008.

2. Bachelor of Technology (Electrical and Electronics) with an aggregate of 76% and First Class with Distinction grade from Audi Sankara College of Engineering and Technology, affiliated to JNTU, Hyderabad during 2002-2006.

3. Intermediate (Mathematics, Physics, Chemistry) with an aggregate of 81.1% from Board of intermediate during 1999-2001.

4. Secondary School Certificate with an aggregate of 81.8% from Board of Secondary Education in 1999.

COMPUTER SKILLS:

PROGRAMMING LANGUAGES: C
DESIGN Languages: Matlab
Tools: Neural Network Tool box in Matlab, Fuzzy Tool
Box in Matlab and Neuro-Fuzzy Tool Box in
Matlab

PROFESSIONAL EXPERIENCE:

„« Working as a lecturer in JNTU college of Engineering, Anantapur from August-2007 to till date and handling various subjects and labs for M.Tech and B.Tech.

Subjects Taught:

I taught the following subjects at Graduate and Post Graduate levels i. Adaptive Control systems for M.Tech students ii. Control Systems for B.Tech students iii. Electrical Machines for B.Tech students iv. Basic Electrical Engineering fir B.Tech students v. PLC and their applications for M.Tech students vi. Artificial Neural Networks and Fuzzy Systems for M.Tech students vii. Control Systems Lab for B.Tech students and viii. MATLAB Simulation lab for B.Tech and M.Tech students.
ix. Electrical Technology lab for B.Tech students

PROJECTS:

M.Tech Academic project:

Title: Maximum Power Point Tracking in Photovoltaic Cells Using Neuro-Fuzzy Controller at JNTU College of Engineering, Anantapur.

The aim of the project is to track the maximum power point in photovoltaic cells for various irradiance and temperature conditions. For this the modeling of Photovoltaic Arrays is done by using MATLAB programming and the Maximum Power Point is tracked by implementing Fuzzy logic based method and Neuro-Fuzzy based MPPT method in MATLAB environment. This work mainly augments for the research in Non-Conventional energy sources that are abundantly available and pollution free.

I have also assisted my project guide in publishing a paper in MEDWELL International Journal.

Details of Paper Presented In Medwell Journals:

Title: Modeling and a MPPT Method for Solar Cells
Author: R. Kiranmayi
Source: Journal of Engineering and Applied Sciences 3 (1): 128-133, 2008

B.Tech Academic project:
Title: PWM Actuating System for Air Craft Control, ECIL HYD.

The main aim of this project is to regulate the position of control surfaces of the Air Craft located in the Wings, Rudder and Elevator based on command signals received. The actuating system consists of PWM based Amplifier and Actuator connected by cables. As this is a servomechanism based project it mainly deals with the construction and working principle of PWM amplifier.

OTHER ACHIEVEMENTS:

* Secured 6th rank in PGCET-2006 M.Tech entrance.
* Stood first in all school and college level academics.

PERSONAL PROFILE:
Date of Birth: 11/11/1983
Place of Birth: Chittoor
Sex: Female
Nationality: Indian
Languages: Tamil, English, Telugu and Hindi

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5051 to 5100 of 15512)

Go to Search Parameters...

Brief Description

A position as a Computer Web Designing / Software Programming / Hardware & Networking / Data Entry / Documentation for a company concerned about the integration and design of their operational network.

Thirteen years of experience in the field of project management, feasibility Studies, front end engineering, conceptual design, Project proposals, detail design, flexibility Analysis, procurement assistance in piping/pipeline design.

Qualified Civil Engineer-total of 16 years of experince in construction industry as Structural Engineer and Design Engineer in the filed of civil engineering and post tensioning of buildings ans bridges

Process Engineer in Oil & Gas Consultancy.

Area of Interest AVO/AVA, Inversion, Reservoir characterisation using Pattern Recognition and Spectral Decomposition and Attenuation.

Completion and workover engineer (11.5 years experience)

Mineral processing engineer, AutoCad drafter and transportation system design

Experience in field development plan, identification of workover requirements, well completion, acquisition of subsurface data, optimization of well performance and project management,

I beleive my strong college degree and work experince in mining, construction and logistics operations will be an asset for any organization.

Over 13 years of professional experience in all facets of highway engineering covering planning, design using MXROAD software and AUTOCAD, including widening of national highways and Expressways. Experience cover route selection of Highways, geometric design, pavement design of pavements etc.

Contract Oil & Gas Technical Writer Twenty years of progressive responsibilities in oil and gas industry.

mapping, remote sensing, exploration, aerial primary data acquisition.

Schlumberger 17 years Coiled Tubing / Nitrogen services/Fracturing

Design and drafting OIl and Gas processign facilities, Structural, Piping, Civil. 7 Years experience with 3D CADWORX modelling on Canadian and international projects. Recently worked on Enterprise's Meeker II facility as well as Green River Gas Plant (PROPAK) early 90's.

Bilingual English-Spanish Project Manager with over 6 years of experience working for diverse industries including the Oil, the light and heavy construction, and the Steel Production.

Smelter expert - ISA smelter; waste Heat Recovery Boiler (WHRB), DM Plant, Electric Arc Furnace, Rotary Holding Furnace (RHF), Converters, Anode furnace, casting wheel and Sulfuric Acid plant.

I would like to apply with your company for the position of a INSTRUMENT SUPERVISOR /TECHNICIAN I have 11 years of oilfield ,gas plant ,power plant and some process plants experience as an SUPERVISOR, TECHNICIAN . I am having good work experiance with clients like ENI , IRAN PHASES 4 & 5 KOC -

Responsible for crude evaluation, expansion project related configuration studies, perspective planning and scenario analysis and retro analysis.

Exploration Geologist

Graduate /Diploma in Computer Application, Tally , Corel draw, Typing Speed @ 40 W.P.M.

I have completed my Masters degree in Chemical Engineering from Lamar University. I have experience in ASPEN PLUS, ASPEN DYNAMICS, HYSYS, PRO-II for two years. I did my internship in Dynamic Engineering Purity Inc. for six months.

mechnical welding and NDT inspector

I am a mechanical engineer and I have been in the OIL & GAS DRILLING profession for past five years as rig mechanic, who is engaged in repair and maintenance of RIG equipments. I have good communication skills as well as great commitment towards work

HYSYS simulations, process design, optimization, Process flow diagrams (PFD) and P&ID

Never give up persom and full of integrity

Presently I am working with M/s B. S. Chaudhry & Co. as a Mud Engineer on E 760-II (1600 HP SCR), M 900-1 (900 HP), M 750 (750 HP), Cardwell-6, & Cardwell-7 since Jan.-2007 to till date continue at Mehsana Asset under MMC contract with ONGCL

M.Tech-Control Systems Engineer with 2 years of Experience in Teaching and Projects Handling

Retain & supervise outside professionals (including attorneys & land professionals) for lease and property acquisitions. „X Negotiate, prepare and administer oil & gas leases, operating, farm-out, and exploration agreements. Build Abstracts of Title. Sharp, innovative, quick learner and have

2 years and 3 months of experience as geologist of underground mine of Au/Ag and the exploration to ore deposits of Au, Ag, Cu and W. All this in my country, México.

Having experience in Mechanical Engineering in the field more than 10 years of Oil and Gas and Manufacturing industries mostly in engineering and inspections. Has worked in INDIA,and SINGAPORE on Onshore & Offshore.

my educational in Highway Engineering has been balanced by actual work experience. I have worked for a leading Infrastructure contractor Arabtec Construction from November 2004 to Jan.2007 and recently I¡¦m working with a leading government authority RTA as Traffic Safety Engineer

over 10 years experience in electronic and over 2 years offshore electrical.

Geologist with strong work ethic & 5 years exprience in Appalachian Basin with a sturdy skill set.

Substation Automation engineer with 5 years of experience

DCS, Control system and Maintenance Engineer

MCA with 2 Years exp in asp.net,vb.net,asp,vb,c#,html,sql,access

Regular visits of unmanned platforms and Taking care of all production / maintenance activities on day to day basis.

I am working as a highway engineer from past 6 years. I have over 3 years of experience with MX design software, 2 years with Inroads one year with Land Development Destok. In my past experience I involved using Indian code, dutch codes and AASHTO codes.

As a Land / Hydrographic Surveyor with 19 years experience covering a variety of harbour surveys, ocean, dredging, engineering, buildings, breakwater construction, jetty construction, roads and offshore construction surveys working with numerous projections and spheroids.

Experienced Consultant Wellsite Geologist with 10 years of International Experience

Project management of a quarry/mining operations.

Experienced Electronics and Communication Engineer for 13 years, performing electronics and communication task which includes bench troubleshooting, repair, maintenance, installation and commissioning. Performing Assistant Supervisory task.

E & I designer

Currently Working with PCPL (PETRONAS CARIGALI PAKISTAN LTD). As a FMC Field & Materials Coordinator

Establishment of Health, Safety and Environment Management function

Higher secondary (Pre Degree Certificate, Kerala University in India) & • Three Years Diploma in Mechanical Engineering (Technical Education Department Kerala, India.)

Seven year experience in HVAC design and maintenance

I am NACE International’s CIP Level 3 (Peer Review) Certified Coating Inspector having over 13 years of experiences in QA/QC Inspection of Corrosion Prevention Activities & Insulation Inspection for Oil & Gas Projects.

Safety Director, Electrical Construction

Over 24 years of extensive experience in progressively responsible positions in the Construction Industry. I speak Russian.

First Prev 101 [ 102 ] 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out