Resume - Able to operate and maintain well and familiar with typical oil / gas production...

Misco Jobs

Resume #88045

CONTACT INFORMATION:
View contact information...

Objective: Transfer science and Technology, with excellent skill, knowledge and working experience to the company for achieve company goal.

Place / Birth Date: Nganjuk, 9 May 198 1

Age: 28 Years Old

Sex: Male
Status: Married Nationality: Indonesia

Language: Indonesia, English (Excellent)

Health: Excellent

Skill, Knowledge, Working Experience: Excellent

Working Experience: 7 year and 10 month in Oil and Gas Company

Current Position: Senior Production Operator

EDUCATION

1. POLITECHN IC MALANG from 1998 until 2001 Degree in
2. SMU (Senior High School) Loceret from 1995 until 1998 Degree in
3. SMPN (Junior High School) 1 NganjukFrom 1992 until 1995 Degree in
4. SDN (Elementary School) Pacekulon IV from 1986 until 1992 Degree in

COURSES AND T RAINING

1. Computer MS office at September 2001 until December 2001 in LP3I Malang
2. Intermediate English Language at September 2001 until December 2001 in
LP3I Malang
3. Basic Japanese Language at September 2001 until December 2001 in LP3I Malang
4. Pre Employment Training Program Gulf Resources (Kakap) Ltd. By Institute of Training in Energy and Mineral Resources Oil and Gas Training Center in Cepu-Indonesia at 21 Jan – 18 May 2002. With Certificate.
5. Basic Fire fighting Training. By Institute of Training in Energy and Mineral
Resources Oil and Gas Training Center in Cepu-Indonesia at 20 May – 24
May 2002. With Certificate.
6. H2S and Other Toxic Atmospheres. By Global Training Cent er in Jakarta at
June 20 02.
7. Passenger Ditching Helicopter Underwater Escape Training (HUET) & Sea Survival by Surv ival Systems Asia (safety and Surv ival Training Services) in Association with PT. Samson Tiara at June 2002 with Certificate.
8. First Aid Training. By Emergency First Aider 118 in Jakarta on July 2002.
9. Centum CS 3000 Operation. By Training Center of Yokogawa Indonesia in PT. Yokogawa Indonesia (Wisma Aldiron) Jakarta at 7 - 9 October 2002 with certificate.
10. Basic Gas and Diesel Engine (Caterpillar) in Trakindo Training Center
Jakarta at October 2002.
11. Total Plant Solution System Overview. By PT. Hone ywell Indonesia in
Jakarta Indonesia at 21 – 22 October 2002 with Certificate.
12. Gas Turbine Generator and Gas Compressor Set Operation and
Maintenance. By PT. Pakarti Hand ayani Jakarta in Jakarta at 28 – 31 October
2002.
13. Technical Training of Modicon Level 1 Programming. By PT.Scheneider
Indonesia for PT. Conoc o Phillips Jakarta in Jakarta at 19 – 22 November
2002 with certificate.
14. Gas Production Operation. By MCP Professional Training and Developing Excellence in Jakarta at 17 – 21 Dec 2002 for Conoco Phillips Jakarta with certificate.
15. Certificate of Pedestal Crane Class A Operator. By Institute of Training in Energy and Mineral Resources Oil and Gas Training Center in Cepu- Indonesia at 30 Jan – 01 February 2004. With Certificate.
16. Crane Operator Training. By Institute of Training in Energy and Mineral
Resources Oil and Gas Training Center in Cepu-Indonesia at 27 – 29 Jan
2004. with Certificate.
17. Training of Scaffolding Safety and Working Health as Scaffolder. By
ALKON Jakarta in Jakarta at February 2006 with certificate.
18. CEMS (Continued Emission Monitoring System) Training in KF Platform
Kakap Field South China Sea on August 2006.
19. Training of Sampling and Analysis Technique of Oil Content in water using spectrophotometer method. By PT Core lab Jakarta on Kakap Natu na FPSO
at 2 Oct 2007 with certificate.
20. Bright Star Training. By Star Energy in Mawar Indah Hotel Ciawi at 28 –
30 Nov ember 2007.
21. Certificate of Pedestal Crane Operator class A. By Institute of Training in Energy and Mineral Resources Oil and Gas Training Center with association PT.ALKON in Surabaya -Indonesia at 03 – 05 March 2008 with Certificate.
22. Awareness ISO 14001:2004. By Star Energy SHE o n KH P/F Kakap Field at 7 February 2009 with certificate.
23. First Aid by Indosafe Pratama on Jakarta at 18 – 19 May 2009 with certificate.
24. Operator training Harmonas DEO DCS system by PT.Yamatake Berca Indonesia on Jakarta at 8 – 10 Oct 2009 with certificate.

JOB TRAINING AND RESEARCH

1. Last Assignment title: the effect of CaCO3 additional on coconut sugar quality in P3GI Pas uruan 2001.
2. On job training on Ultra Jaya Mil k Industry Aug - Sep 2000 In Bandung
3. On job training on Educational and Training Center for Oil and Gas Jan-May 2002 In Cepu, Indo nesia.

WORKING EXPERIENCES

Company: Gulf Resources (Kakap) Ltd (2002-2003) Position: Production Operator
Location: KF P/F
Offshore, Kakap Block, South China Sea, Natuna
Assign For: Gulf Resources (Kakap) Ltd

Company: Conoco Phillips (2003 – 2004) Position: Production Operator
Location: KF P/F
Offshore, Kakap Block, South China Sea, Natuna
Assign For: Conoco Phillips (Kakap) Ltd

Company: Star Energy (Kakap) Ltd (since 2004) - Present
Position: Senior Production Operator
Location: KH P/F
Offshore, Kakap Block, South China Sea, Natuna
Assign For: Star Energy (Kakap) Ltd

TECHNICAL SKILL

Operate and Troubleshoot of Platform Facilities:

1. Taurus Gas Turbine Compressor, Electric Gas Lift Compressor, Gas Engine Compressor (ME-2000 and KH GLC CAS-100X), Gas Engine generator, Diesel Generator, Gas Turbine Generator, Air Compressor, Chlorine Generator, Test Separator, HP Separator, Gas Scrubber, Heat Exchanger, Water treatment (DGF and CPI), EST (Electric Static Treater) Separator, Fire Water Pump, Cooling Water Pump, Gas Lift Compressor, Crane Operator, Texsteam Chemical Injection Pump, TEG (Glycol) Pump, RO W ater Maker, Oil Shipping Pu mp, Cond ensate Pump, Serv iced Pump, Sump Caisson Pump, Hot Oil Pump, Flushing Pump, Switch over power generator, Oil Plant, Gas Plant.

2. Able to operate and maintain well and familiar with typical oil / gas production flowing well, Sub Sea Well and Gas lift well.

3. Laboratory measurement of water cut (BS&W), oil content, pH, SRB, iron/chlorine content and analyze crude oil sample for API Gravity.

4. Familiarize and able to handling Oil & Gas process with Distribute
Control System (DCS) Yokogawa Centum CS 3000, Yamatake DEO-Harmonas. And Ability to conduct Operations Process upset – Trouble Shooting, familiar to operate DCS system, production optimization.

5. Familiarize with safety health and environment (SHE) procedure and
ISO 14001.

6. Familiarize with procedures of oil and gas process start-up and Shut down.
7. Experiences in handling Chemicals.

8. Experiences in Pigging operation.

9. Experience in pedestal crane operator.

10. Assist in wire line / slick line activities.

11. Able to read drawing of Process and Flow Diagram (PFD) & Piping and
Instrument Diagram (PID).

12. Able in paper work as Daily, Weekly, Monthly and Yearly Production
Report.

COMPUTER SKIL LS

* Maintenance Computer
* Microsoft office
* JDE Warehouse Program
* Internet
* Email Lotus Note
* Windows

Present Job Title: Senior Production Operator on KH Platform, Star Energy
Kakap Field-Natuna, South China Sea.

REFFERENCES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7051 to 7100 of 15497)

Go to Search Parameters...

Brief Description

Expertized in Project management, Implementaion of Policies and Proficient in MS Office, Completed MBA(Management Information System)

I have been working infield of structural Design since last Eight years-using modern technologies and software. I done RCC , Steel & Precast Structures in commercial, residential & industrial Area

M.Sc. Geologist, looking for a job in oil industry

I am a conscientious, reliable and hard working person, capable of fulfilling responsibilities, following instructions accurately and working under pressure to tight deadlines. I get on well with other people and I am a supportive team player. I have 11 years extensive experience of work in accounti

Electrical Design, Feasibility Study, Safety Audit, Procurement, Installation, Punchlisting, Commissioning / Start-up & Maintenance Experience in Oil & Gas (Petroleum Refinery) Industry - Project & Maintenance Departments

Rotating equipment Engineer, 12 years of experience in petrochemicals plant(Polypropylene plant experience spheripol & novolen technology)

Presently Working with Samsung Engineering in Seoul Head Office as Lead Project Controls Since Nov 04 Trend/TIC program Implementation Contracts Management & Control

Do all activities of SHE for all units running at the refinery such as safety committee, HAZOP studies, EIA, Inspections, Audating, work permits

I hold a bachelor of Mining Engineering (Hons) degree from the University of Leeds in England and a Masters of Business Administration (MBA) degree from the Copperbelt University here in Zambia. My working experience spans over a period of 10 years i.e. 9 years in mining and 1 year in the financial

Analysis Estimation-Officer 10 years as operations engineer in power plant

HSE, H2S, Fire fighting, Fire protection, Inspection, Rig or Plant, Off or on Shore

Electrical Engineer, Transformer especiallist, excellent project management, supervised High Voltage test field project C$ 20 M, excellent computer skills including networks administration

Master Qualified Instrument Engineer with 10 years experience of detailed design engineer

Working as Mechanical Maintenance Supervisor.

Summary of Experience

Masters Degree in Metallurgical Egg with Specilisation in Welding Egg. Prepare, Review & Approve Welding Procedures as per various Codes / Standards. API 510 Pressure Vessel Inspector.· Trouble shooting of welding and related issues.

Inst. Engineer with 13 years Inst. Design experience in the field of Oil. Petrochemical Refineries. Attended FAT/ SAT, Hazop etc.

Seeking professional or technical employment in Software Engineering, Computer Science, or Web Development. Offering extensive education and experience in computer science and mathematics.

Operation Drilling Engineer - Drilling Superintendent - Drilling/Completion/Work Over Supervisor

30 + years in Security and Law Enforcement. Extensive management experience having worked in several positions throughout the world

The past ten years in the construction industry has been most fruitful and challenging as I have found that supervision work includes duties of engineers,architects & contractors at times, from co-ordinating M&E & Architectural activities down to helping the main contractor to arrange meeting with c

Construction Manager / Superintendent /Commercial

Project Manager/ Superitendent/Estimator

PDS, CADWorx, Rebis AutoPlant

HSE Officer

24 years exp. oil and gas manufacturing, machining, repairing, rebuilding of all components of drilling and service rigs. Also gas plant experience. Have a red seal machinist ticket acquired with a grade 12 education at the northern institute of technology, Edmonton Alberta Canada.

A senior Process Analyzer Specialist with twenty – five years of experience in the Petro Chemical Industry. Strengths include: design work, upgrades, start–up assistance, works to meet tight deadlines and budgets; pays close attention to detail.

Fully experienced in all aspects of maintenance of oil and gas production facilities, hands on experience of major overhauls of rotating equipment which includes operation of GE frame 5 Gas turbines.Responsible for supervision of all disciplines to ensure safe and efficient maintenance proceedures.

About 10 years experience working for Copper and Cobalt mine. Experienced in both underground and Openpit minig methods. Proficient in the use of datamine mining software, and I'm conversant with both underground and opepit mapping

Exploration Geologist, Geologist, good in Mapping, drill crew supervicing, Diamond and RC core logging, trainning of local field assistants and field technicians, office management and administration, map production, report writing

I m B. Tech. in Bitechnology working as Mud Engineer

Professional Qualified Accountant-CPA(K), Diploma in HR Management holder & have a hands on experience in Fund Accounting . I am a team player, work with minimum supervision, dependable and expert of high integrity. I have hands on experience in Computerized Accounts i.e QuickBooks & Sage

I am working as a Plant Inspector with AIB-Vincotte International ltd. I am involved in inspection activities in Petroleum sector for the last 11 years, am well familiar with most of International codes and standrards such as API, ASME, BS, ISO etc.

reated designs for electrical equipment, conduit, and cable in power plants. created equipment schedules, conduit schedules, and cabling schedules to be used in the field. also created wiring lists to keep track of cables and wiring documentation in excel format and gsn

20 years of project management, EPCM international experience in Oil & Gas. On shore, chemical, petro chemical, LNG, power plants, offshore platforms, from inception of project through design to built up & close out. Cost estimation of global tenders of capital projects,.

I'm a Mechanical Engineering Graduate with vast experience in oilfield static and rotating equipment operations and process drawings

INSTRUMENTATION ENGINEER EXP. IN OIL&GAS FROM SAUDI ARAMCO PROJECT

Able to operate and maintain well and familiar with typical oil / gas production flowing well, Sub Sea Well and Gas lift well.

Rotating Equipments : Centrifugal Pumps, Split Casing Pumps,Sea water pumps Steam Turbines, Gas Turbines, Reciprocating Compressors, Turbo Compressors, Rotary Feeders, Lobe Blowers, Conveyer Belts ,Diesel Generator ,Hydraulic pump, High pressure piping, valves, High pressure water tube boiler, Heat

I have worked as Mudlogging Geologist in Baker Hughes Inteq For two years, For detail View my CV

The above given details are true to best of my knowledge & if any wrong I agree to do your needful.

B.E. graduate with more than 2 yrs of experience in Primavera and IT

Mechanical engineer having more than 2 years of experince in mantanance of underground mining machineries in coal and metal mines .

Driller

Piping design engineer (pdms) with 2+ years exp.

BE MECHANICAL WITH POST GRADUATION IN PIPING ENGINEERING, PDMS,AUTOCAD 2004

More than 8 Years of experience in the field of ELV System specialist well versed in Installation testing and commissioning of systems Including Building management system, CCTV System, Access Control system , Structured cabling etc..Having gained extensive experience as a team leader in execution

Working for Schlumberger oilfield services as Directional Drilling Engineer in Republic of Yemen

DCS AUTOMATION SYSTEM DESIGN ENGINEER

COmputer Literate--AutoCadd,Primavera,MSoffice Applications

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 [ 142 ] 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out