Resume - More than eighteen years of experience in premium International Oil and Gas Engi...

Misco Jobs

Resume #88094

CONTACT INFORMATION:
View contact information...

EDUCATIONAL QUALIFICATIONS

B. Engineering, Chemical, 1991, India.

SUMMARY OF EXPERIENCE

2001 TILL DATE

Employed as "Principal Safety Engineer" since 2001.

My major job responsibilities include leading a team of Engineers and Designers in performing the following design and engineering activities for Conceptual, FEED (Front End Engineering Design), Basic Engineering, Detailed Engineering and EPC (Engineering, Procurement and Construction) Phases of various Oil and Gas, Offshore & Onshore Projects, within budgeted man-hours and Project schedules:

- Process Safety / Technical Safety Design & Engineering: Preparation / review of technical safety deliverables on assigned projects including project safety design philosophy, project HSE plan, plot plan / equipment layout, design of active & passive fire protection systems for hydrocarbon handling area and buildings / enclosures including fire water / foam systems, inert gas (Inergen, FM-200 & CO2) systems, development of fire proofing zone layouts, hazardous area classification, fire & gas detector layouts, fire & gas cause & effect charts, escape route layouts, personnel safety / life saving equipment layouts, fire fighting equipment layouts, safety sign layouts, development of technical specifications, requisitions and procurement of personnel safety, life saving and fire fighting equipment.

- Loss Prevention / Safety Studies: For applying the hazard & effect management process to significant project risks. These include participation in Hazard & Operability (HAZOP) Studies, Hazard Identification (HAZID) Studies, Safety Integrity Level (SIL) Assessment Studies, Project Health, Safety and Environmental Reviews (PHSER), Project Technical Reviews, preparation / review / coordination of Fire Water System Hydraulic Simulation Studies, F & G Detection / Mapping Studies, Fire, Explosion & Dispersion Modelling Studies, Consequence Analysis, Risk Assessment Studies, Escape, Evacuation and Rescue Assessment (EERA) Studies, Emergency System Survivability Assessment (ESSA) Studies and Health Safety and Environmental Impact Assessments (HSEIA).

1991 - 2001

Previous experience included the following for Oil and Gas, Offshore & Onshore, Projects:

- Process Design & Engineering: Process design & engineering of offsite storage terminals / facilities and road / rail transportation facilities for refineries, petrochemical and gas processing plants and including preparation of process design basis, process flow diagrams (PFD's), process & instrumentation diagrams (P&ID's), equipment & instruments datasheets and cause & effect charts.

- Pre-commissioning and Commissioning: Development of operating manuals, pre-commissioning / commissioning procedures / documents, participation in pre-commissioning and commissioning activities.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 15341)

Go to Search Parameters...

Brief Description

Extensive open pit mining experience in most diverse and difficult cultures, in Africa , Central Asia ,India , hands- on project construction experience at a 40 Million USD Dephosphorisation Plant ,Acquisition of Mining properties in West Africa

Financial Accounting, Costing, Budgeting and Project Accounts

An experienced construction planner and P3, P6 user. He has both design and site experience. His strength is in planning, construction sequence, resource optimization and cost application. He has been working in Singapore for more than 17y.

*Twenty-seven (27) years of experience, have been working in MIDDLE EAST, EUROPE and in Far East Asia. Highly professional with strong communication and leadership skills. Well organized with flexibility and common sense. Computer literate in WIN 95/98,Office 2000,MS XP and Internet task.

Positions - Project Manager, Project Control Manager, Planning Manager and Director in the area of process simulation, predictive control and risk. Hands on, onshore plants (oil, gas), aluminum, ammonium nitrate, offsite and utilities, offshore platforms and pipelines. Capex from $100M to $5Billion

I have Fifteen (15) years of professional and technical engineering experiences in my field of expertise. Strong civil, structural and geotechnical engineering, analysis, design and calculation skills in vertical and horizontal projects such as petrochemicals, industrial, institutional

A, resourceful and dynamic Information Technology (IT) professional with over 15 years experience in oil and gas and technology industries.

A production/well completion engineer with over 20 years experience in Canada and overseas

Drilling Financial Controller responsible for all drilling expenditures

15 plus years of Rig and Merchant Naval experience with good administrative and communication skills as a Radio Officer/Purser/Fleet Administrative Officer on board foreign going vessels and rig. Have good experience in handling chopper program, boat program, material movements, crew changes, crew t

Responsible for entire Process monitoring, Trouble Shooting/ Rectification or modification for optimum Production in each section.

I have Very good Experience in the Petrophysical Operation, Studies and Well reservoir Survillance. Have experience in QC/QA of integrated studies. Have leadership experience

30 YEARS OF INTERNATIONAL PROJECT MANAGEMENT EXPERIENCE

Geoscientist

Honor degree in Mechanical Engineering form UK and have gained more than twenty five years experience in the fields of major sub-sea assets management, assets integrity, offshore operations, projects and contracts management, inspection, maintenance and marine related projects.

Marine Pilot/ Mooring Master/ Loading Master

Sr. Technical Writer with Software, O&G expeience, PMP Cert

Materials Controller/Warehouse Supervisor/Logistics Supervisor

Multi skilled engineer, Technical Advisor, Mud Engineer

Over 19 years experiences in construction of storage tanks starting from pre contract stage to execution including cost estimation, manpower and equipments planning, scheduling, material procur2ement, customer and engineering general correspondence, progress calculation , progress tracking, and i

15 years Mechanical Engineer within Oil / Gas & refinery industry, inclusive 5 years maintenance experience; 5 years for nuclear power project; P.Eng of APEGGA, Canada

Can perform both technical work and sales work involving oil/gas industry more specifically as an advisor, planner, support or salesperson.

Have a wide range 4yrs experience as Safety Engineer in a construction firm. I develop and implement safety programs to minimize losses due to injuries and property damage hey try to eliminate unsafe practices and conditions in industrial plants, mines, and stores as well as on const

Drilling Engineer – DCWO planning, programming, engineering, operations evaluation, performance analysis; deep HPHT gas wells, high deviated, ERD and horizontal oil wells, sidetrack wells; land operations; harsh desert (Middle Asia) and arctic (Siberia) environment; English-Russian-Slovak

Over thirty years of experience in major US and International design/build facilities programs where responsibilities have included senior-level Project Management, Construction Management, Engineering and Design Management, equipment selection, installation and start-up. P&L responsibility for all

In search for the position where my background would be valuable, your esteemed organization came to my attention as one that might find my experience of interest. The enclosed professional profile will provide you with information concerning my overall education and capabilities for your review.

I have over 28 years of experience in the field of Electro- Mechanical Engineering of which 6 years in Middle East and 7 years in Nigeria with European MEP Contracting Company. My responsibilities include Pre Tender estimation, Estimation of manpower and material for the projects, supervise and impl

Senior Mechanical Engineer experienced in detailed mechanical / thermal / process and E&I design of Fired Heaters, Reaction Furnaces, Reformers, SCR’s WHRU’s, Boilers, Incinerators, Flares and associated ancillary equipment. Very strong E&I, DCS / PLC & BMS skills.

By working 17 years in the field of petrochemical field, I experienced all kinds of key projects like FCCU, Hydro-cracking unit, Hydro-treating unit and have expert ability to do piping static and dynamic stress analysis. Also I have five years working experience as a mechanical engineer in refinery

35 years of experience in the process industry working for engineering firms, equipment manufacturers, chemical company

Proven track record in project management in oil refinery handling bid projects with multinational contractor, excellent team leader with motivation schele

I am proficient in researching title and court records, including but not limited to conveyances, mortgages and other indexes, along with curing said title when needed. I am able to determine from said title or records mineral and/or surface ownership in Louisiana, Mississippi, Alabama and Texas.

Conducting a piping training program from zero skill up to a skill trainees supervising the assigned work from planning, organizing, leading and controlling. Performed piping work activities from designing and drawing the piping tie-in to existing pipelines, drawing various structural platform

Twenty years of professional experience in, design, consultancy, construction and maintenance, covering a broad range.

25 years of experience in construction, installation, commissioning, testing and maintenance of Electrical, Electronics and Instrumentation equipments and controls in Petrochemical Industry

Graduate Mining Engineer having vast experience in mining operation, Drilling & Blasting and Marketing / export of explosives.

Have more than 20 years experience in Piping Design and Engineering including Stress Analysis and Piping Materials Control for various projects in petrochemical plants, refineries and commercial chemical plants. Presently working in Worley Parsons (Colt Engineering Corporation), Calgary, Canada

A challenging position in a result-oriented company that seeks an ambitious Person, where acquire professional skills and devotion towards safety on priority, sharing of knowledge as a learning point and grow with the company in allocated budget and high safety/quality services to the client.

A result-oriented and talented professional with an extensive experience 26 years in the oil & gas industry . Expertise in commissioning, DCS control room operations, oil refining processing , crude oil & gas processing, oil & gas operational environment.

PMS-Planned Maintenance and Spares & Purchase Database administrator and building.

Underground: Project Engineer (evaluation, design, development & production; metals mining), Senior Engineer or Technical Services Supervisor

Rig Manager/ Drilling Superintendent/ Drilling Supervisor.

Canadian, B.Sc. geology, 28 years experience in mineral exploration, evaluation, development, production and administration, particularly in gold. Lived and worked in Canada, Saudi Arabia, Botswana, Russia, Iran and assignments in Kazakhstan and Uzbekistan. Computer literate.

I am a qualified Metallurgist and in addition to I have extensive Metallurgical experience in the Diamond, Base metals and Andalusite fields. I am an innovative and enthusiastic person. I have been involved as Senior Process Engineer, Plant Design Engineer, Chief Diamond Sorter and Plant Manager.

Over 18 years experience in 2D and 3D seismic data processing. Processing land desert and mountain data. Processing experience gained in Geofizyka Krakow Ltd, WesternGeco and CGGVeritas. User knowledge of Unix, Linux , excellent Omega SPS and Tango, basic ProMAX. Good MS Office skills.

Exploration ,Mining

Advanced Process Controls, RealTime Process Information Systems, LIMS

PROJECT MANAGEMENT, CORROSION & MATERIALS,INSPECTION & INTEGRITY ENGINEER/MANAGER

More than eighteen years of experience in premium International Oil and Gas Engineering Consultancy Companies within the field of Process Safety, Technical Safety and Loss Prevention.

A Graduate Civil Engineer of 18 years experience (10 years in Kuwait & 8 years in India) in various levels in the field of Project Management and Construction, at present working with Kuwait National Petroleum Company¡¦s Project Department On Secondment basis.

First 1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out