Resume - reated designs for electrical equipment, conduit, and cable in power plants. cre...

Misco Jobs

Resume #88224

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
SEEKING A LONG TERM POSITION AS A DESIGNER IN THE ENGINEERING INDUSTRY.

STRENGTHS:

* bilingual/ spanish
* experienced in civil and electrical design
* expert communicator
* training in autocad, microstation and gsn
* works, excel, word, and access
* osha certified
* familiar with drawing and design standards
* team player
* 3-d design experience

experience:

associate designer: august 2008- july 2009
stanley consultants, englewood, co.
tools used were microstation, autocad and gsn

created designs for electrical equipment, conduit, and cable in power plants. created equipment schedules, conduit schedules, and cabling schedules to be used in the field. also created wiring lists to keep track of cables and wiring documentation in excel format and gsn.
created training manual for gsn that can be used and implemented around the company.
performed as a lead to coordinate gsn.
lead classroom instruction on gsn to other designers
routed conduits and power cabling for a power plant in afghanistan and in florida.
designed and developed electrical transmission line routing for a power plant in utah.
designed autocad standards and design standards used company wide.
communicated with outside designers and engineers, regularly
traveled to sites to perform field activities.
performed field locations of power feeds, power wiring and panel locations

drafter, designer, february 2008- july 2009
cal vada surveying, englewood co.
tools used were autocad, excel,

prepared legal descriptions for properties in colorado.
wrote legal descriptions and have developed a comprehensive understanding of legal descriptions.
developed drawings and plats, and plot plans using autocad and excel for legal descriptions
located and plotted out locations of control points using autocad

drafter, december 2007- february 2008
xcel energy, denver, co.
used autocad, gis, access

created an access database for use in power industry to locate transformers and transmission lines routed throughout colorado.
performed gis mapping and drafting for locating transformers and power lines. used autocad as primary tool.
located power points and transformer locations on field drawings. transposed information into an autocad file for permanent documentation

drafter, august 2007- december 2008
qc data, englewood, co
microstation

developed drawings to locate telephone and utility lines located in california
transposed information into an microstation file for permanent documentation
education:
metropolitan state college of denver, denver co, with majors in business and in teaching
university of northern colorado in greeley
hastings college in nebraska, with classes in business
b.a, spanish, immersion classes within the county of mexico for 6 months
technical expertise:
microsoft office suite, microsoft access, excel, autocad, microstation, gsn, gis, autocad mapping and solid works

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7051 to 7100 of 15497)

Go to Search Parameters...

Brief Description

I have been working infield of structural Design since last Eight years-using modern technologies and software. I done RCC , Steel & Precast Structures in commercial, residential & industrial Area

M.Sc. Geologist, looking for a job in oil industry

I am a conscientious, reliable and hard working person, capable of fulfilling responsibilities, following instructions accurately and working under pressure to tight deadlines. I get on well with other people and I am a supportive team player. I have 11 years extensive experience of work in accounti

Electrical Design, Feasibility Study, Safety Audit, Procurement, Installation, Punchlisting, Commissioning / Start-up & Maintenance Experience in Oil & Gas (Petroleum Refinery) Industry - Project & Maintenance Departments

Rotating equipment Engineer, 12 years of experience in petrochemicals plant(Polypropylene plant experience spheripol & novolen technology)

Presently Working with Samsung Engineering in Seoul Head Office as Lead Project Controls Since Nov 04 Trend/TIC program Implementation Contracts Management & Control

Do all activities of SHE for all units running at the refinery such as safety committee, HAZOP studies, EIA, Inspections, Audating, work permits

I hold a bachelor of Mining Engineering (Hons) degree from the University of Leeds in England and a Masters of Business Administration (MBA) degree from the Copperbelt University here in Zambia. My working experience spans over a period of 10 years i.e. 9 years in mining and 1 year in the financial

Analysis Estimation-Officer 10 years as operations engineer in power plant

HSE, H2S, Fire fighting, Fire protection, Inspection, Rig or Plant, Off or on Shore

Electrical Engineer, Transformer especiallist, excellent project management, supervised High Voltage test field project C$ 20 M, excellent computer skills including networks administration

Master Qualified Instrument Engineer with 10 years experience of detailed design engineer

Working as Mechanical Maintenance Supervisor.

Summary of Experience

Masters Degree in Metallurgical Egg with Specilisation in Welding Egg. Prepare, Review & Approve Welding Procedures as per various Codes / Standards. API 510 Pressure Vessel Inspector.· Trouble shooting of welding and related issues.

Inst. Engineer with 13 years Inst. Design experience in the field of Oil. Petrochemical Refineries. Attended FAT/ SAT, Hazop etc.

Seeking professional or technical employment in Software Engineering, Computer Science, or Web Development. Offering extensive education and experience in computer science and mathematics.

Operation Drilling Engineer - Drilling Superintendent - Drilling/Completion/Work Over Supervisor

30 + years in Security and Law Enforcement. Extensive management experience having worked in several positions throughout the world

The past ten years in the construction industry has been most fruitful and challenging as I have found that supervision work includes duties of engineers,architects & contractors at times, from co-ordinating M&E & Architectural activities down to helping the main contractor to arrange meeting with c

Construction Manager / Superintendent /Commercial

Project Manager/ Superitendent/Estimator

PDS, CADWorx, Rebis AutoPlant

HSE Officer

24 years exp. oil and gas manufacturing, machining, repairing, rebuilding of all components of drilling and service rigs. Also gas plant experience. Have a red seal machinist ticket acquired with a grade 12 education at the northern institute of technology, Edmonton Alberta Canada.

A senior Process Analyzer Specialist with twenty – five years of experience in the Petro Chemical Industry. Strengths include: design work, upgrades, start–up assistance, works to meet tight deadlines and budgets; pays close attention to detail.

Fully experienced in all aspects of maintenance of oil and gas production facilities, hands on experience of major overhauls of rotating equipment which includes operation of GE frame 5 Gas turbines.Responsible for supervision of all disciplines to ensure safe and efficient maintenance proceedures.

About 10 years experience working for Copper and Cobalt mine. Experienced in both underground and Openpit minig methods. Proficient in the use of datamine mining software, and I'm conversant with both underground and opepit mapping

Exploration Geologist, Geologist, good in Mapping, drill crew supervicing, Diamond and RC core logging, trainning of local field assistants and field technicians, office management and administration, map production, report writing

I m B. Tech. in Bitechnology working as Mud Engineer

Professional Qualified Accountant-CPA(K), Diploma in HR Management holder & have a hands on experience in Fund Accounting . I am a team player, work with minimum supervision, dependable and expert of high integrity. I have hands on experience in Computerized Accounts i.e QuickBooks & Sage

I am working as a Plant Inspector with AIB-Vincotte International ltd. I am involved in inspection activities in Petroleum sector for the last 11 years, am well familiar with most of International codes and standrards such as API, ASME, BS, ISO etc.

reated designs for electrical equipment, conduit, and cable in power plants. created equipment schedules, conduit schedules, and cabling schedules to be used in the field. also created wiring lists to keep track of cables and wiring documentation in excel format and gsn

20 years of project management, EPCM international experience in Oil & Gas. On shore, chemical, petro chemical, LNG, power plants, offshore platforms, from inception of project through design to built up & close out. Cost estimation of global tenders of capital projects,.

I'm a Mechanical Engineering Graduate with vast experience in oilfield static and rotating equipment operations and process drawings

INSTRUMENTATION ENGINEER EXP. IN OIL&GAS FROM SAUDI ARAMCO PROJECT

Able to operate and maintain well and familiar with typical oil / gas production flowing well, Sub Sea Well and Gas lift well.

Rotating Equipments : Centrifugal Pumps, Split Casing Pumps,Sea water pumps Steam Turbines, Gas Turbines, Reciprocating Compressors, Turbo Compressors, Rotary Feeders, Lobe Blowers, Conveyer Belts ,Diesel Generator ,Hydraulic pump, High pressure piping, valves, High pressure water tube boiler, Heat

I have worked as Mudlogging Geologist in Baker Hughes Inteq For two years, For detail View my CV

The above given details are true to best of my knowledge & if any wrong I agree to do your needful.

B.E. graduate with more than 2 yrs of experience in Primavera and IT

Mechanical engineer having more than 2 years of experince in mantanance of underground mining machineries in coal and metal mines .

Driller

Piping design engineer (pdms) with 2+ years exp.

BE MECHANICAL WITH POST GRADUATION IN PIPING ENGINEERING, PDMS,AUTOCAD 2004

More than 8 Years of experience in the field of ELV System specialist well versed in Installation testing and commissioning of systems Including Building management system, CCTV System, Access Control system , Structured cabling etc..Having gained extensive experience as a team leader in execution

Working for Schlumberger oilfield services as Directional Drilling Engineer in Republic of Yemen

DCS AUTOMATION SYSTEM DESIGN ENGINEER

COmputer Literate--AutoCadd,Primavera,MSoffice Applications

with computer proficiency in SESAM, ABAQUS, PATRAN, FLEXCOM, ASAS, SACS, FEMGV, STAAD Pro, AutoCAD, and MathCAD

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 [ 142 ] 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out