Resume - NDT Level III

Misco Jobs

Resume #88251

CONTACT INFORMATION:
View contact information...

Summary
Customer oriented project manager with excellent interpersonal skills; a team player able to work well with all levels of an organization or with clients.
An effective presenter with excellent verbal and written communicative skills.
The ability to quickly and easily learn new technology either in self study or corporate training settings.
Able to remain focused while developing strategies which produce timely and effective results oriented solutions.

Employment History
Corporate NDE Level III August 2008- Present
Fluor
Greenville, South Carolina
Reviewed and approved NDE vendor procedures for Code and Specification compliance (ASME, API and AWS, CSA).
Provided NDE training to Fluor personnel
Provided NDE Level III support on projects in Russia, Qatar and the Netherlands
ASNT Level III UT, PT and MT

Consulant (Applications Development) March 2007 – August 2008
Structural Integrity Associates
Charlotte, North Carolina
Developed Phased Array Techniques for ultrasonic inspection in the Fossil Power Plant piping and components.
Developed manual and automated Phased Array Techniques utilized in the EPRI PDI (Performance Demonstration Initiative) Qualifications.
Performed field Phased Array ultrasonic inspection on boiler, piping and turbine components.

Project Manager
EPRI (Electric Power Research Institute) May 2005 – March 2007
Charlotte, North Carolina
Coauthored ten (dissimilar metal) accessibility assessment publications.
Prepared as well as administered four automated and manual RPV PDI demonstration sessions as well as managed electronic data security on three domestic and international Nuclear Ultrasonic Inspection qualifications.
NDE Level III March 2003-April 2005
Wesdyne (Contract)

Waltz Mill, Pennsylvania
Level III and data analysis activities on PWR (Pressure Water Reactor) top head CRDM inspections. Prepared associated final evaluation reports.
Pre-Sales Technical Consultant
Amdocs IP Solutions April 2001 - September 2001
San Jose, California
Performed software product presentations
Prepared RFP responses.

Technical Lead Infrastructure Consultant
Hyperion Solution June 2000 – April 2001
Sunnyvale, California
Installed and tested /server software products (assuring that the product met customer expectations.
Additional activities included training clients on installation and troubleshooting techniques.

Windows and UNIX Software Test Engineer System/Administration
Compaq Computers (contract) July 1999 – April 2000
Colorado Springs, Colorado
Performed system administration and software testing on Windows based applications.

NDE Level III
General Electric Inspection Services (contract) *August 1994 – April 1999
Huntersville, North Carolina * May 2002 - January 2005
Performed robotic ultrasonic system and enhanced imagery sales demonstrations for prospective clients.
Responsible for data analysis of automated ultrasonic nuclear reactor pressure vessel inspections results and the preparation of associated final reports.
Wrote technical training documents and provided technical training.
PDI Qualified RPV Automated Ultrasonic Ultrasonic Testing, detection and sizing.

NDE Level III
Cooper Nuclear Station September 1996 – May 1997
Brownville, Nebraska
Planned and executed Level III NDE (ISI and the corrosion program) outage activities at Cooper Nuclear Station (Nebraska Public Power District).

NDE Project Manager/Technical Lead
CTI Inc. *August 1989 – August 1994
Martinez, California
Performed automated ultrasonic scanning system sales demonstrations.
Planned, managed and executed automated ultrasonic inspections.

NDE Project Manager/Technical Lead
Combustion Engineering/Amdata (contract) October 1985 - August 1989
Windsor, Connecticut
Planned, managed and executed automated and manual ultrasonic inspections of fossil power plants.

*Various domestic and international projects.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2851 to 2900 of 15341)

Go to Search Parameters...

Brief Description

34 years in oil industry, toolpush and wellsite supervisor

Civil and Structure AutoCAD Draughtman with 17 years experiance

I have more than 10 years of maintenance experience as an instrument technician

Adaptable, Senior Procurement specialist with international experience in Europe, Middle East and the FSU, with EPC’s, operators and service companies. A buyer, with experience of procurement procedures, expediting, inspections, shipping (incoterms) & customs. Knowledge of sulphuric acid plant procu

Metallurgical engineer, Technical consultant, multi-task,

Visionary professional with 11 years Operation experience in Oil and Gas plant, Petrochemical and Cryogenic plants

OBJECTIVE: To be a Resident Engineer or a Project Manager.

I have 15 years experience as Extraction-Production Onshore Oil & Gas Engineer (artificial lift, Sucker Rod Pumping, PCP): Section Head of Field Extraction-Production Onshore Oil & Gas, Technologist Engineer, Night Shift Engineer, Echometer, Optimization Wells, Slickline

NDT Level III

My experience in different Engineering Consultancy Company like SMEC International Ltd.as well International Contractor like Construction & Industrial equipment Ltd in St. Lucia, Caribbean Island, Strabag International assigned in Libya, Willbros International Inc.,Houston Texas, assigned in Nigeria

A highly effective Chemical Engineering Professional who meets challenges head-on and creates positive change. A creative and detail-oriented Six Sigma Black Belt, with a proven record of success in new product development and process improvement; and track record of success developing and leading

BSc in env. MSc in safety eng.

Planning, Scheduling, Cost Control

Oil and gas economics manager

Cement Production Supervisor // Senior Cement Process Engineer //

Over 25 years of teaching practical and theoretical in the field of mechanical maintenance in the Philippines and Middle East

Twenty(20) years of experience in detail engineering/FEED/PMC of petrochemical complex/refinery/major industrial projects. 11 years wotking in middle east countrirs. Familiar with international codes and standards.

Mechanical engineer having a vast experience in general management for the vehicles fleet management, construction equipments, ground equipments with the most succesful profit and loss bases.

A highly experienced Pre-Commissioning, Commissioning, Start-Up and Field Engineer, Coordinator, Supervisor, Shut-Down planner, having worked on many varied projects Having a Degree – Marine Engineer, (Ship Engineer)

Proven ability to provide Industry initiative and leadership. 20 years of experience. Extensive SCADA, PLC, DCS and HMI Project Management Consulting knowledge.

Materials, Warehouse, Asset, Logistics Management

Iam seeks job for Procurement / Material coorninator

Power Plant Erection/Maintenance /Warranty Engineer

Field Engineer

dcs panel operation for terminal and plant

GRADUATE DIPLOMA HOLDER (3 year fulltime study) in MECHANICAL ENGINEERING, having Certifications as SENIOR WELDING INSPECTOR (CSWIP 3.2) -TWI LONDON, NACE (USA) COATING INSPECTOR LEVEL 1 – CERTIFIED, NQA (UK London) Certificate of Training in ISO 9001-2000 QMS Auditor, ASNT LEVEL II-RT,UT,MT,PT

I'm having good knoweldge of Land Survey work and having sound knowelge of Microsoft Excel which is very much useful in estimation works

Petrophysicist, Log analyst

He is the Manager of Technology Development in Exploration & Production in the Corporate Direction of Strategic Planning of PEMEX. Previously, he was Well Productivity Manager in the Technology and Professional Development Vice-presidency of PEMEX Exploration & Production. Also, he has been the head

Geotechnical Engineer & Ph. D in Civil Engineering with 15 years experience work as University Researcher and Mainly as Freelance Expert-Consultant.

Sales and marketing Experiences.

Comprehensive experience in contracts management and projects management, construction management, mechanical, maintenance and operations management, mainly oilfield and production plants.

Environmental Engineer with Background in Hydrogeology and Geology

QA/QC engineer/inspector in piping/pipeline and facilities construction in oil/gas. And an HND in welding/fabrication .

Have wide-ranging experience in Oil & gas (both Onshore & Offshore), refinery and petrochemical industries with good exposure towards Distributed Control Systems, Safeguarding Systems, Fire & Gas Systems and various types of Field Instruments.

Civil Engineer

I am a 3D PDS piping designer I work in various field of engineering, mostly oil & gas I have also knowledge in structural designing

Geologist, with 18 years of experience in the hydrocarbon sector, working in Venezuela, Trinidad and Tobago, Brazil and Mexico. Good command of computers. Experienced working and studying in a multicultural and diverse environment - Excellent interpersonal, communication and teamwork skills.

Safety Engineer/Professional

Senior Structural CAD Designer (direct & contract assignments)

Seeking challenging Position in Project Management where I can use my Experience, Market Exposure, Management Skill and Communication to achieve the high goals set by the organisation

7+ Yrs Exp in Mechanical CAD/FEA/CAE/CFD

Oil and Gas Production Operator, Lead Operator, workovers, Construction,inspections, repairs, trouble shooting, meter calibration, azcom, Hazmat, Confined spaces, Firefigting, water susvival, T-2, Dot, elicopter afety and fueling

I have 10 years of experience in E&P business, evaluating basins interms of potential, play maturation, volumetrics,maturing prospects, interpreting seismic data, building geological and facies model, well operation, seismic inversion, fluid substitution modelling, porosity estimation, AVO analysis.

I'm currently working at Doha, Qatar as a document controller for construction company.

QS experienced within building and civils, 31yo, 10yrs experience.

Seeking Environmental Health and Safety position

BBA Construction Management - Project Controls Specialist

I am currently working with Australian Multinational Gold Exploration Company as a Geologist with Indo Gold Mines Pvt. Ltd., Bangalore. Our Exploration target is Gold Prospect in Rajasthan, India involved with grassroots Gold Exploration. Working within a small team has allowed me exposure.

Quality control manager - BE Metallurgy - Looking after all quality complaints, Metallurgical testing

First Prev 51 52 53 54 55 56 57 [ 58 ] 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out