Resume - ERZ Controller (Underground Deputy)

Misco Jobs

Resume #88264

CONTACT INFORMATION:
View contact information...

WORK HISTORY

CARBOROUGH DOWNS COAL (VALE)

30/06/2008 - STILL EMPLOYED

Position: ERZ CONTROLLER (DEPUTY UNDERGROUND)
DEVELOPMENT AND LONGWALL

Duties:

- Ensuring a pro-active approach to safety management and maintenance of mine standards.
- Assist with the implementation of safe work procedures including conducting safety inspections, assisting in conducting safety observations and contact sessions, and participating in conduct of safety investigations as required.
- Provide technical and practical support to the crews.
- A demonstrated commitment to achieving Zero Harm in Health, Safety, Environment and Community.
- Sound technical knowledge of underground coal mining processes including practical, operating and mechanical knowledge of conveyors, longwall, and continuous mining equipment.
- Sound problem solving and organizational skills.
- The allocation of resources in line with the requirements and directions of the longwall Superintendent.
- Liaise with Tech Services Personnel: Ventilation Officer, Strata Engineer, Gas Drainage Engineer and also Mechanical and Electrical Coordinators.
- Experienced in working as a team player and a willingness to take on responsibilities in a team.

03/2007 – 30/05/2008 XSTRATA NEWLANDS COAL
NORTHERN UNDERGROUND
GLENDEN QUEENSLAND

Position: ERZ CONTROLLER (DEPUTY UNDERGROUND)
OURBYE, DEVELOPMENT AND LONGWALL

Duties:

- Liaise with the Outbye/Dev/LW Superintendents with regard to the management of contractors working on site undertaking various tasks eg
Installation of goaf seals,
Belt retraction,
Belt installation,
Strata support,
Road Maintenance,
Pipe installation,
Longwall relocation and
Longwall installation.

- Core Outbye Deputy task in relation to Mine Managers inspection regime.
- Liaise with Tech Services Department in regard to their requirements.

18/05/1998 - 03/2007: XSTRATA NEWLANDS COAL
SOUTHERN UNDERGROUND
GLENDEN QUEENSLAND

Position: Longwall Face Operator Maintainer

Worked on Longwall from mini-build on surface until end of mine.

The seam at Newlands Southern was approximately 6mtrs, with extraction of 4.5mtrs and face width of 250mtrs. There was a total of 15 blocks and the seam gas contained 95% methane with a high spon com risk.

Duties: Longwall face Duties: Authorized and competent to operate all face and main gate equipment including shearer and chocks. Longwall moves and installation, including, installing Haska Mesh and operating rapid face bolter. Operating various other Longwall move equipment which included the following:

- Electric mule (Petito)
- Eimco 936
- Eimco ED10
- Eimco 913
- Eimco 130
- FBL 40 (Godzilla)
- Driftrunner
- PJB
- Shearer Carrier

Other tasks authorized and qualified to perform:

- First Aid – Senior
- First Response Training (CABA)
- Appointed instructor
- Conduct local risk assessment
- Apply risk management process
- Conduct Health and Safety investigations
- Risk Management
- Incident/Accident investigation
- Communicate information
- Spontaneous combustion – SIMTARS
- Conduct environmental monitoring – mini gas
- Control Room Operator

Certificated Training:
- Certificate 4 in Underground Coal Mining – MNC40304
- Assist Shot Firing Course and Gas ticket, S1,2,3,G2.
- Senior First Aid Certificate
- Apply and Administer Etonox Certificate
- Low Voltage Switchboard and Rescue Ticket

XSTRATA – NEWLANDS COAL – SOUTHERN UNDERGROUND

Position: Miner – Development

Duties: Face duties as follows:
- Installing roof and rib bolts
- Rockets
- Care and maintenance of all cables and hoses
- O/Bye installation of water barriers
- Temporary Stoppings
- Installing all pipe work and maintenance of roads.
- Panel belt extensions

1996 – 1998 CONTRACTORS - COLROK AUSTRALIA
REB ENGINEERING PTY LTD

MIM HOLDINGS (UNDERGROUND)
OAKY CREEK NO. 1 COLLIERY

NORTH GOONYELLA

MORANBAH NORTH

Position: Secondary Support Crew Underground

Duties:
- Rib bolting and meshing
- Roof Bolting.
- Drill and install 12m Cable Bolts
- Drill and install 6m Flexi Bolts
- Pack, Grout and Truss Cable Bolts
- Install Steel Sets
- Suspend Crown, ie 7ft Roof Bolts, 6m Flexi Bolts, 12m Cable Bolts and Lag Crowns.
- Stand Legs and Support against rib
- Install Timber Cogs and Fiber Creat Cogs.
- Concrete Laying
- Bolt, mesh and secure faults
- Main gate installation

Certificated Trainings:
- Gopher & Windy Borer
- Air Track (drill rig)
- Eimco 913

1989- 1996 MOUNT ISA MINES LIMITED (XSTRATA)
UNDERGROUND (X41)
MOUNT ISA QUEENSLAND

Position: Timberman Underground

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7851 to 7900 of 15341)

Go to Search Parameters...

Brief Description

Advanced skills for professional design in 3D (Autodesk Inventor 2009)

Heavy duty mechanic

Oil and Gas Equipment supply

Mechanical Draughtsman with Diploma in echanical Engg. 5 yrs. Exp.

Computers, home building from foundation up. Media instalations (cable industry work)

Experienced workover rig driller looking for international or domestic work as the western Canadain oilfield has slowed down. I am hard working, a quick learner and very adapable to new surroundings. As you can see from my resume, I am a dedicated and loyal employee as well.

Skills include Lease Negotiations, farm ins and farm outs, JOAs, Oklahoma Corporation Commision forms and requirements, Pooling Orders, Division of Interests, Due Diligence, Title Curative, Ownership Reports.

Qualifications & Skills: Title Runsheets, Lease Take Off's, Ownership Rpts., Lease Acquistions and Due Diligence

structural drafter or designer, preferably on the offshore indestry.

Bulldozer Operator, performed pre and post operation of the bulldozer

I am looking for a career within a company that promotes from within and encourages continuous learning as well as where my enthusiasm, drive and knowledge will be a valuable asset.

Skills- Creative and Innovative, Good Communicative Skills. Ability to Work under Pressure. Ability To Mobilize And Supervise People. Strong in Team spirit. Microsoft Office software and the Internet, , Qualificatiions- Higher National Diploma (HND) in Insurance (Lower credit), 2007.

Instrument design wihin oil and gas industry. Using Intools and CAD packages.

I have been working for 6 years on inland drilling rigs. I worked my way up to driller last year & have 4 years exp. as a derrickman.

B.Sc Honours Mining Engineering

Senior Cased Hole Wireline Engineer

Conducting baseline Survey, Conducting technical and Enviro legal study,Modeling of Air impacts using ISCST 3 and CALINE 4 for evaluating the proposed change in concentration of various pollutants, ,Conducting Public hearing Preparation of EMP (Environment Management Plan), M.Sc environemnt science,

Welding Inspector/Trainer/Supervisor

Deepwater Completion engineer

Master Electrician

ERZ Controller (Underground Deputy)

20+ years exp and Involved in the commissioning of Copper/Gold Mine, Barrick Buzwagi

Over 25 years experience in the pipeline construction industry. Positions held range from heavy equipment operator, superintendent, foreman, & utility inspector. Qualifications listed with ISNetworld, OSHA Safety certifications

11 years of experience in Project Cost Control on Saudi Aramco Projects in Saudi Arabia. Presently working for Saudi Aramco thru secondment.

+16 yrs of experience in EPC/PMC, TPI Quality control & in Construction Companies. Having well experiences for various stages wise Inspections involving Pressure Vessels, Storage Tanks, A/G & U/G Piping & Structural Steel Works. (ONSHORE & OFFSHORE).

Comprehensive drilling experience of 11+ years in various locations worlwide with E&P Operators. Four years experience as Drilling Supervisor offshore Thailand and Gulf of Mexico. Seven years Drilling Engineering experience onshore and offshore, includes day to day rig operations management.

BSc Hohours Degree in Mining Engineering, Now working as Planning Manager for an Open Pit operation. Very good in Planning , using Surpac Mining software.

Production Technology, Completion Engineering, Well Testing, Nodal Analysis, Flow Modelling & Production Optimization

My experience in construction 6 years with contactor company.

Competent Mine Geologist, Key skills - Analytical, underground mapping, core logging, Resource estimation using Datamine as well as leadership skills

20 years Materials Controller / Coordinator

sr;mechanical engineer /project engineer/construction engineer/manager/engineer

Program/Project Manager

Over fourteen years of experience in Detail / Design, Supervision and Drafting of plant layouts, piping systems for onshore oil and gas facilities, refineries, pipelines, power & sugar plants and industry utilities.

Qualified Boilermaker/ Welder, with over 25 years experience, mostly on mines and construction.

Hard Rock Miner / Diamond Driller experienced in all phases of narrow vien gold mining and block & cave molybdenum mining.Diamond Driller using a Hagby 300 rotary drill. Also some experience as relief shift boss

Sr. Geotechnical Engr, Design and Construction of Underground Structures, Mgmt of Multidisciplinary Projects, Numerical Modeling, Rock Mechanics, Ground Support Design, Tunnel Inspections, Hands-on Experience in Applying FLAC, FLAC3d, UDEC and 3DEC Codes in Design, Work Under NQA-1 Q A Program

Dynamic 12 years of professional experience, with 8 years pioneering in the field of Oil and Gas business. HSSE training of company personnel, HSSE master plan implementation, auditing and recommending system updates according to company needs and international legal requirements

I am willing to work as hard as I have to in order to make a specific position work for me.

Managment, Project Managment, Geological and Ore Body Modelling Skills

Petroleum Engineer with 11 years working in Subsurface Services with solid knowledge and field experience in Water Control Technologies, Squeeze Cement with Coiled Tubing, Coiled Tubing, Snubbing , Wire Line, Logging, Well Abandons and Stimulation Jobs. Bilingual Level English - Spanish.

Over 15 Years of Management in Operations, Manufacturing, Installations, Utility / Facility Maintenance, Repairs, Distribution, Capital Equipment Purchasing, Equipment Maintenance, Transportation Maintenance, Minor/Major Construction and Fixed Firm Price/ Contracts

Chemistry, Physics and Calculus Educator/trainer. Native Spanish speaker.

Oil & Gas operation technician (Gauger) in OM&S (Oil Moments and Storage).

Overseas experience Truck shovel operations Dragline operations Mechanical and electric trucks to 240 ton capacity Cat and Letourneau loaders. Electric and hydraulic shovels and excavators.

SUMMARY Professional Manager with real life experience in business management and successful sales specific to Russian and East European business marketplaces. Experience in working with remote corporate resources. Highly-motivated, energetic team player available for extensive travel.

Experienced, long and short range, production planner for open cut gold and copper mines in California and Arizona. Skilled professional with supervisory experience. Twelve years MEDSystem experience. Team player with excellent communication skills and perfect safety record.

Challenging position in the Engineering field, in an organization, where I can Contribute my strong analytical and troubleshooting skills and experience in Machinist, Designing and CNC Programming along with the outstanding Interpersonal skills and grow professionally.

I have 12 years of experience in oil and gas field operations. I've handled various responsibilities from exploration stage of field to upgradation of production to 65000 BOPD. Attached below is resume.

Field Construction Engineer

First Prev 151 152 153 154 155 156 157 [ 158 ] 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out