Resume - I have a lot of experience in drilling and drilling fluids.Desired position is F...

Misco Jobs

Resume #88383

CONTACT INFORMATION:
View contact information...

Executiv summary:
I am a highly experienced engineer in drilling and drilling fluids activities.In this period,I participated at the drilling activities of many wells for oil and gas with depth between 800-5000m,vertical,deviate and horizontal.I participated at training sessions and outside training courses organized by my companies.I managed to establish a good relations with customers,my crew members and all members of all companies involved in drilling process.

Work Experience:
2006-2009--Drilling Fluids Specialist II, M-I SWACO-Romania
Responsabilities:
Buiding and maintaining the best proprieties of drillind fluids during drilling and other ope-
ration at the wells.Running on daily basis,at well location,with the proper laboratory kits,all tests for the drilling fluid according to the A.P.I.standards.Issuing daily reports for the Benefi-
ciary and Drilling Contactor,as required.performing recaps,inventorying productsand costs,re-
ordering and re-stocking needed materials and chemicals.Determining,recommending and co-
ordinating the necessary treatments for fluid maintenance within the design parameters.Provi-
ding technical support and good level of communication with M-I Swaco customers.Respond to variation in mud condition in a timely and professional manner.Acting according with local and internal QHSE rules.Providing computerized consulting regarding the fluid hydraulics(
rheological features,pressure drops etc.),daily variation of fluid parameters,chemical consum-
ption and costs recorded over the entire duration of the operation.Monitor mud consumption and respond to downhole mud loses in a timely manner.Conduct well lolcation pilot testing for unusal mud treatments,or as required by Company well location supervisory staff,to avoid unsuitable or potenyially damaging or incompatible additions to the circulating system.Pro-
active engineering of the drilling fluid system.Prepared Final Well Report as required.Buid strong relation with team members in field.

2005-2006—Drilling Supervisor, NABORS DRILLING-Oman branch
Responsabilities:
To supervise and ensure work progresses in accordance with company approved drilling programs.Implementing the company's procedures and new technologies in field.I have promoted continual monitoring and structured improvement of performance and efficiency.

1999-2005—Drilling Supervisor and Safetyman, PETROCONDUCT-Romania
Responsibility:
Perform and supervise drilling operation on the rig following the required standing in-
struction/procedures.To manage,directed and motivated-assignet team to ensure efficient, timely and safety execution of planned activities.To implement thje Company's HSE policies in field.

1991-1999—Rig Manager, DRILLING WELLS COMANESTI-Romania
Responsabilities:
I was responsible for all paperwork generated at the rig.I also ensured that the operation comply with company policies and government regulations.During this period I made arran-
gements to prepare areas for driling and also organized the setting up and dismantling of rigs.
I have monitored the proper implementation of drilling programs.Ensure that the rig operation are well documented and related reports are issued.Responded to emergency and non routine situations,provided required instruction and ensured that appropriate measures are implmen-
ted to reliefe the emergency situation.Ensure that work under my control is performed in a safe and environmentally sound manner.Continously strive to improve the performance of drilling operations,contractor equipments and service company resources under my control.
Build strong relation with team members in field.I was subordinated to the technical manager.

1988-1991—Toolpusher, DRIILING WELLS COMANESTI-Romania
Responsabilities:
I coordinate the work of one shift of drilling crew.I made sure that the rig operations are
Well documented and related reports are issued.Assured technical integrity of drilled wells.
To keep costs down and the equipments in good repair.Implement the company health,safety and environment policies,procedures and regulations.Subordinated to the Rig manager.

Education:
Petroleum-Gas University of Ploiesti, Drilling –Production Engineer Diploma
(1983—1988)
Proffesional training:
-IWCF Drilling Supervisor Certificate nr S37344RO4810164,Issue date:05.02.2006
-Nabors Drilling Training courses: Rig management system,First aid&CPR,Hydrogen
Sulphide,Fire fighting,Safety leaders'workshop,New employee orientation,RMS orien-
tation,Drilling competency,RMS modules,Rig start up,IADC rig pass.
-M-I Swaco Basic Drilling Fluid Technology Certificate,Issue data: 03.11.2006
-M-I Swaco IFE: Completion&Workover fluids,Waste management&treatment service
-M-I Swaco Training courses:Drive Smart,H2S awareness,Safety equipments
Obervations:
- Fluent use of Windows based PC software such as MS-Word,MS-Excel
-Foreign languages: English-good, French-good
-I have Driving License categories: B,C,Dand E
-A highly experienced leader and a communicative person

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 51 to 100 of 15498)

Go to Search Parameters...

Brief Description

23 years experience including IT management, systems architecture and design, analysis, modelling and development, training as well as IS/IT strategies and frameworks for management information systems.

Free! Analysis/Design/Construction Heavy Concrete and Steel Industrial Structures/Foundations

Twenty years experience in Mechanical Engineering/Design with the last ten years of continuous experience in pipe stress analysis. Pipe stress analysis, pipe supports selection&design, pressure vessel stress analysis & mechanical design, process equipment technical expertise.

Analytical Chemist, Environment, food, pharmaceutical quality control, research

Specialization in Procurement/Purchase. qualification : Master Degree in Commerce.

IT management

Process Instrumentation & Control, Project Engineering, SCADA, PCS, ESD, F&G Systems & SIL Analysis, Control System Protocols & Network Security, Control Valves & Flow Measurements, Gas/Petrochemical & Petroleum Plant Design & Refining Operations, Wireless Networks (IEEE 802.15.4, ISA 100.11a)

Accomplished Engineer with 22 years significant design, construction and management experiences in Civil Engineering, and acted as Project Manager on a number of large projects. Led multidiscipline teams for a wide range of projects related to planning, preliminary design, detail design and construc

HSE, Logistics, Fire protection, Contractors administration, site Supervision.

with practical experience in HRM and Marketing & B.D. fields enhanced by theoretical MBA background. Well acquainted with HRM, organizational and marketing practices gathered within my career path. I also have an aptitude for learning and high level of adaptability

Process Flow Assurance Engineer

Mud Engineer in Shallow and Deep Wells as Spud Mud, Polymers, Lignite and Lignosulphonate, PAC, Lime Mud, C.M.C mud, Filtrate Loss Control, Glycerin mud, Inverse mud, GOE, Inverted mud, applied in onshore/ offshore operations, HPHT well.

Holding Ph. D degree in Hydrology, MSc in Geophysics, long term research experinece in groundwater as well as surface water hydrology such as; groundwater investigations, water quality assessment, groundwater monitoring, watershed modeling etc

20 years of experience

MS Geology; structural geology, prospect generation, basin analysis, petroleum systems, clastics, log analysis, field studies, Petrel, training, managment, recruiting

I have a lot of experience in drilling and drilling fluids.Desired position is Fluids Engineer onshore or Company Man onshore.

I have experience and skills in the following areas: Production Management, Quality Engineering, Project Management, and Purchasing

Good team player and a strong believer in teamwork and performance; Good verbal & written communication skills and a continuous improvement focus; Good facilitation skills, networking with industry professionals and performing presentations at workshops and seminars; Good leadership and mentorin

20 yrs of international reservoir engineer experience in evaluation, design, simulation, management and implement of oil and gas exploration and development projects in both E&P Companies and consulting firms

Would you please see my CV and references attached?

Free! Quality Management Specialist

an accomplished project manager, Chartered Engineer, with BSc, MSc, in mechanical engineering, holder of IMechE's Diploma in Engineering Management - (Project Management), extensive experience in design engineering, plant engineering, cost and scheduling, procurement, contract administration

21 yars in Oil and Gas Industry

Install, commissioning and Site Acceptance Test for Substation Control and Monitoring System (SICAM SAS): PROFIBUS FMS (fiber optic cables) protocol between Bay Control Units and Substation Controller

Adaptable, Versatile and highly experienced, Possessing excellent communication skilled at all levels, the propensity to empathize and get on well with people at all levels.Disciplined,Selfmotivated with the ability to motivate others, able to assimilate and retain information quickly, taking a po

Surveying Engineer/Survey Project Manager

I had a master degree in structural engineering from the University of Southern California.

Professional Maintenance and Integrity Manager

Quality Control Manager

20 years of proven success effectively managing maintenance, manufacturing, and production departments

30 years of process design and engineering experience with major EPC and Oil companies in Oil and Gas projects. I am Canadian citizen and a licensed professional engineer in Canada. Presently working with Jacobs Canada Inc as Process Director. Handled multibillion dollar projects.

Free! A forward-thinking, results-oriented TOP OIL AND GAS EXPLORATIONIST with international experience for major and independent oil and gas companies on new ventures and geophysical interpretation. Contributed to ten oil and four gas discoveries in Brazil, Indonesia, Ecuador, Argentina, and Gabon.

Energetic and result-focused professional with extensive project engineering and project management experience. A unique blend of engineering and oil and gas industry skills, including SAGD and CSS operations. Able to implement innovative ideas of problem solving and meet commitments with a customer

I am an experienced EIA and environmental management consultant with experience in mining, oil and gas and construction. I have worked in various countries (Kenya, PNG, Pakistan, Afghanistan, Botswana, Sri Lanka, & UK) & have been environment manager for construction of major dams in Laos & Egypt.

An extremely talented Power Plant chemist with huge background in operating and maintaining Water Treatment plant . boiler water treatment , Cooling water treatment , steam and water analysis, lube & fuel oil analysis , coal analysis , Effluent Treatments and Environmental monitoring

Over twenty years experience as process engineer working with ExxonMobil¡¦s Scanfiner, Phillips¡¦s Zsorb, Crude, FCC units, Hydrotreaters, BTX, Hydrocracker, Cogen, Delayed Coker, Ethylene Cracker Sulfolane and Reformer units. Possess two technical graduate degrees.

Chief structural

Project Manager - FEED - EPC - PMC - Oil/Gas

Cesar has over twenty four years experience as Electrical Engineer and seven years experience as a Control Engineer, having positions such as Regional Sales Manager, Field Engineer, Engineer Project Manager, Electrical Supervisor, System Integrator and Senior Controls Engineer.

Twenty five years experience as a Process Engineer in Chemical Engineering Industry. Specialized in equipment sizing, Simulation (HYSYS, VMG, Pro II, ChemCad), PFD and P&ID preparation, Optimization, Heat Integration, LDT, Pump Hydraulics, PSV and Control Valve sizing

CSWIP AUT/ASNT LEVEL III/AWS-SCWI INSPECTOR

As you will see from my resume I have spent the past 28 years working in drilling and production wells both on-shore and off-shore where I have gained considerable experience. I have strong leadership and organizational skills and a proven ability to manage and motivate a team.

Professsional Manager/ Group General Manager/Managing Director/ Management Consultant/ Chief Executive Officer

I am a Reservoir Engineer with extensive hands on reservoir, field development and management experience. I have worked with sandstone and carbonate reservoirs, EOR processes, risk analysis, reservoir analysis, field development and reservoir surveillance. I have considerable simulation experience.

Mechanical/Marine engineer with extensive exprience in operation, Repair, Construction, Commissioning and Maintenance in Marine, Petrochemical, offshore oil/gas and Wind power industry.

I graduated as a Metallurgical Engineer, B(Ing) at the University of Pretoria in 1986. In 2002 I successfully completed my MBL at UNISA. During my career I attended various in-house and specialised courses to equip myself for the industry and the executive positions.

More than 25 years in OIL & GAS Offshore and Onshore Industry.

Senior Geologist - Develoment Geologist - Advisor

Security operations,Health and safety,HR Management,General and strategic Administartion

Have more than 20 years operation and maintenance experience in the thermal and gas turbine power plants. Spent 10 years in a management role.

First 1 [ 2 ] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out