Resume - Refinery operation, technical service to hydrocracker/hydrogen/sulphur recovery ...

Misco Jobs

Resume #88478

CONTACT INFORMATION:
View contact information...

Objective
To aspire for a responsible, challenging and rewarding position

Date Of Birth ? 1sth June, 1969
Gender ? Male
Nationality ? Indian
Marital Status ? Married
Present Job Title ? In-Charge, Hydro processing Unit, Technical Support to Operation
Present Employer ? Bahrain Petroleum Company

Professional Profile

* Fully Skilled Professional with 12+ years of industrial experience in the field of Process Design, Technical Service, Petroleum Refinery Operation, Emergency Handling, Up-gradation/Preparation of Operating/Turndown/Process Safety Procedures, Quality Control Management, Analysis by Hysis, HAZOP and Risk Assessment, Plant Troubleshooting, Energy Survey and Modifications for Performance Enhancement, etc. Presently working with BAPCO, Bahrain as a technical and operation assistance for hydro processing plant

Accomplishments

BAPCO, Bahrain
* Service from 21st Sept'2007 to till-to-date
* Operational and Technical assistance to improve plant performance & conservation of energy
* Review, update and maintain procedures & schedules for safe & trouble-free operation
* Analysis of Plant performance using PI Process Book and HYSIS
* Plant Troubleshooting and remedial actions to achieve on-specification products
* Assistance in day to day operations, i.e., chemical consumption, PPE, technical survey, etc.

Numaligarh Refinery Ltd
* Service from 7th Jan'1999 to 20th Sept'2007
* Full involvement in Project, Commissioning and Operation of Hydrogen and Hydrocracker Plant
* Review, update of Process Manual, PFD, P&ID, Emergency Procedure, Fire & Safety Regulations
* Preparation of punch list, expedite for early job execution
* Did many troubleshooting and modification jobs during plant start-up
* Gave many energy conservation ideas and helped in implementation thru MOC
* Helped in HAZOP study, Risk Evaluation and Remedial Action
* Trained field and panel operators about Plant Operation, Technical Know-how & Industrial safety
* Member of NRL Engineers technical forum
* Efficiency calculation of reactor, pump, compressor, heat exchanger, fractionators, heaters, etc.
* Preparation of daily reports, process capability, specific energy consumption, fuel loss, etc.
* Involved in commissioning activities of Utilities like ETP, Water Treatment, etc.
* Worked with Technical Service Department for around three years
* Full involvement in Revamp Project pre Evaluation and process calculation
Bureau of Energy Efficiency (Productivity Council, Chennai, India)
* Awarded with Certified Energy Manager in year 2005

BPCL (Bharat Petroleum Corporation Limited, Mumbai, India)
* Service from 4th Apr'2005 to 30th Sept'2005 in deputation
* Successfully commissioned of Hydrogen, Hydrocracker and Sulfur Recovery Plant
* Trained Operators, prepared operating manuals, reviewed P&ID & corrected ESD Logics
* Involved in activities like equipment commission, Heater dry-up, Catalyst Loading, Sulfiding, etc.
* Assisted in Equipment performance evaluation, guarantee test run etc.
* Handled many emergency situation

PDIL (Projects & Development India Limited, Noida, Delhi, India)
* Service from 7th Nov'1997 to 6th Jan'1999
* Development of PFD and P&ID, Cost Estimation, Uses of Codes & Standards, process design
* Technology Evaluation and Selection
* Familiarity with API, ASTM, ASME, NACE, BS Codes & Standards.

Expertise

Process Design
* Line Sizing * Control & Relief valve Sizing
* Distillation Column * Pump Hydraulics
* Heat Exchanger Calculations * Use of simulation software
* Review of PFD & P&ID * Technology Evaluation & Selection

Technical Service
* Plant Troubleshooting * Analysis of Plant Performance
* Corrective & Remedial Course of Action * Daily Operational Activities
* Reactor conversion Calculation * Unit Material Balance
* Co-ordination with Vendor * Data Collection & System Survey for Energy
* MOC Evaluation and Implementation * Assistance for Operational Excellence
* HAZOP Study * Energy Conservation Drives & Schemes
* Revamp Study * Safely related survey and audits

Plant Operation
* Plant Commissioning * Preparation of Operating Procedures and Schedules
* Start-up/shut-down activities * Emergency Handling
* Permit System * Knowledge of DCS
* Quality Control Actions * Daily Operational Activities
* ESD & PLC knowledge * Familiar to Plant Safety Regulation & Standards
* Training to operator * Job notification and maintenance follow-up

Experiences
Process, Commissioning and Operational Experiences are highlighted here:

* During the project stage of Hydrocracker units the following problems faced which can provide lots of experience so that the mistakes are not to repeat in future projects, like
* Reactor internals, bubble caps developed cracks. Metallurgy problem
* Reactor feed pumps spillback control valves (Y-type) fixed in wrong directions.
* CHPS sour water line faced back pressure. Design problem.
* Underground CBD system crosslink with FCBD system.
* Hydrocracker GTR failed. Wrong feed analyzed in pilot plant study
* Low pressure nuts & studs were replaced due to inferior quality, project mistake
* Plenty of Leaks in high pressure line flow orifice flange spare plugs
* Frequent rod packing failure of Kobelco make make-up H2 compressor
* Failure of feed filter (German make) 3-way valves
* Sea water cooler (surface condenser) frequent fouling problem

* Some of the commissioning and operation bottlenecks & emergencies of hydrocracker, hydrogen plant (NRL, BPCL & BAPCO) experienced and learned are, like
* Fire in fractionators fin fan due to no reflux as the line choked with congealed VGO
* No reaction in 2nd stage reactor at SOR condition, design problem
* Rising temperature pattern in reactors from SOR
* Limitation in 2nd stage reactor furnace from the first start-up, design problem
* No flow in one of 2nd stage reactor feed pumps spillback Control Valve, unknown reason
* Frequent seal failure of Ebara make reactor feed pumps
* 2nd stage reactor bed DP high (2 times in 6 years)
* Fouling of naphtha vaporizer, difficulty in cleaning due to fixed tube sheet
* Frequent loader valves failure of wet off-gas compressor, condensate carry over
* Fouling of HP exchangers, HPNA build up due to full conversion, no bleed
* REAC fin fan fouling, external air side, rectified by chemical cleaning (detergent foam)
* Frequent failure of injection water pump, packing failure, loader valve/dampner damage
* No flow in one of reactor quench lines, Reverse welded, arrow marked wrongly
* RGC turbine low performance, hydrogen plant steam drum internal damage
* Too much hammering and leakage in LG condensate system, no insulation as per P&ID
*
* Technical support service to Hydrocracker unit in preparing material balance, fuel consumption, specific hydrogen consumption, evaluation of reaction conversion percentage parameters, like
* Process data collection for licenser
* Calculation of reactor conversion like, X (T*), X(RCP), PPC, Hydrogen partial pressure
* Determination of reactor ageing (fouling) and time to replace catalyst
* Calculation of specific energy consumption of process unit, production cost
* Calculation of fuel consumption & oil loss
* Material balance calculation of process units

* Some useful process modifications as per MOC which led to considerable energy saving, like
* Step-less loading system (Hydrocom) of make-up compressor
* Replace warm-up (UCO) of 1st stg feed pump by filtered feed to improve capacity utilization
* Install 3rd injection water pump to avoid NH3 by running two pumps on continuous basis
* Diversion of UCO to diesel product
* Interconnection of Dedicated HSD oil to normal HSD route in unit limit to have CV facility
* Full utilization of HPRT(High Pressure Recovery Turbine)
* CLPS gas KOD (knock out drum) to facilitate condensate separation
* Off-gas comp and CLPS line drain to flare as a safety measure, eliminates H2S hazard
* Waste heat recovery of heaters, generation & superheating of 110 psig steam
* Insulation & tracing of Khuff gas (Fuel Gas) line to heaters to improve efficiency
* Insulation & tracing of HVGO line from tankage to HCU unit limit to conserve heat
* One spare naphtha vaporizer (HE) kept to avoid down time
* Recovery of H2 from refinery fuel gas which is around 30% rich in H2
* Flare gas treatment and recovery of fuel gas

* Some Troubleshooting activities needs to be highlighted for future reference and knowledge, like
* 2nd stage reactor conversion problem, high NH3 in recycle gas
* Low kerosene smoke point, high aromatic feed to 2nd stage, high CAT
* Condensate carry over with sour gas to SRU, no individual flaring provision during upset
* Condensate carry over with CLPS off gas to PSA, no KOD, no dedicated PSA

* Some of process analysis done using simulation software are following,
* CLPS section study for determining scope for maximizing production of LPG
* Fluid properties and its depressurization study.
* Crosschecking equipment and process parameters with respect to design calculations.

* Some workouts relevant to process design
* Familiar with codes & standards required start process design
* Line sizing, pressure drop & velocity limitation
* Pump hydraulic Power, NPSH, head, shutoff head and BEP calculation.
* Heat Exchanger Pressure drop and heat duty calculation
* Control valve and Relief Valve design.
* HPRT – Head, Horsepower
* Compressor- Polytrophic and Adiabatic head, Horsepower, Efficiency

* Assistance to technical service for gathering data to study the viability of modifications or revamps
* Use of exaquantum & log books for DCS data and laboratory test results
* Bottlenecks to be faced to implement a new system, some trial run methods
* Calculations and analysis relevant for production of Euro-diesel
* Hydrocracker revamp for capacity augmentation to treat straight-run diesel
* Study for Reactor catalyst replacement and sulfiding

Computer skill

* Process simulation software: Hysys
* Engineering application user end: SAP, DCS Data acquisition software exaquantum, PI Process
* Application: Microsoft office, Internet Access and WEB Browsing,
* Platforms: Windows 98/2000/XP/Windows Vista
* Programming Language: FORTRAN, Dbase, C++, Visual Basic etc.

Education

* University of Calcutta
M. Tech., Chemical Engineering, Specialization-Petrochemicals & Petroleum refinery Engineering, 1997, First Class, 75%, University College of Science & Technology, Calcutta
* University of Sambalpur
B. E. in Chemical Engineering, 1993, First Class, 60%, Regional Engineering College, Rourkela
Total 61 days vocational training Refinery and Steel Company (Fertilizer Section)
GATE qualified for getting sponsorship for Master of Technology Course
* Assam Higher Secondary Education Council
Higher secondary, 1988, Second Class, 58%, Cotton College, Guwahati, Assam
* Board of Secondary Education, Assam
High School Leaving Certificate, 1986, First division, 76%, Higher secondary School, sarupathar

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5201 to 5250 of 15498)

Go to Search Parameters...

Brief Description

Have nine years of experience, in surveying and site Co-Ordination in construction industry.

+12 yrs as pipe inspector.api,ds1 cat of insp of bha,drillpipe,drill collars.casing & tubing.Emi drillpipe,mpi handling tools and vti/drift of casing and tubing.UT wall thickness and shearwave check slip area

Civil engineer with surveying, mining, and GIS experience

MS chemical engineering from reputed university from Texas. having 3 & more years of experience in chemical /oil and gas sectors. worked as process engineer, expertise in ASPEN Hysys, pressure relief valve sizing, line sizing, hydraulic calculations,sizing of drums,heat exchangers & pump

Over eight year's experience as an Independent Landman, Experienced in both Metes & Bounds alone with Townships & Ranges

development raises,stoooping,shringkage,development incline &decline,alimak raise,rock bolting,grouting,shotcreting,ladder raises,timber raises,driving vechicles,driving hauling dump,loader ctx4b,ctx5n,5g,loader toro 151,loader toro 006,loaders 13 elphinstone caterpillar,loaders mini scoop,manitou,f

Senior maintenance planner. I do many things of maintenance planning system on Petrosea sites. Setting up maintenance process, controlling maintenance operation, and providing maintenance improvement based on current condition.

My performance focused on electrical and instrument engineer, which contain electrical and instrument performance on control and trouble shooting, like dcs, plc, tranduser indicator and all mill transmitter valve.

GIS Specialist/Geologist/IT - M.Sc. Ore deposits exploration ; 3 years of exp. Serbia, Mongolia, Australia,

Eqiupment Operator Open pit mining Haul Trucks 100ton to 330ton Tigers Dozers 10+ years big mining operations on dumps, high walls, and P&H shovel floors.

Maintenance of all heavy earth moving machine, spare parts planning,break down analysis

Experienced Landman

Material Controller with over 12 years of relevant experience in major international oil and gas companies. Have deep knowledge of supply chain principles and procedures. Familiar with most of material controlling systems and softwares. Strong knowledge of almost all types of construction, fabri

I have perform the entire supply chain of the mining industry from production to logistic to shipping and sales. Have work in Indonesia for the past 6 years and also very familiar with China coal market. I have experience in coal and Iron Ore. Have visited at least 30 mines in Indonesia.

P.G diploma in business administration for Aberdeen, U.K, and now a days i am working for pakistan oilfields limited as an executive administration. I am incharge of an oilfield from last 3 years.

B.E Mechanical with 6 years of experience in design field using ProE

Seeking Royalty Owner Relations Position

Field Service Technician, Electrician, Machine Repair, PLC Programming, Electrical Systems Design, Welding, Installation.

Well Qualified, Skilled & Experienced proffer in Design, Consultancy, R&D in Civil, Structural, Geotechnical, Architectural and Industrial Engineering

Free! I am an Engineering Geologist with 12 years post graduate experience in geotechnical consulting, construction supervision and mining operations. HAve post graduate qualifications in Engineering Geology (M.Sc) and am currently working as Geotechnical Superintendent at a world class mining operation.

+15 yrs exp,Concept,FEED,Detail Engineering,Oil/Gas,onshore,offshore,power plants,Rotating Equipment,Pumps,Compressors,Turbines,Engines,Pressure Vessels,Tanks,Heat Exchangers,Chemical Injection,Instrument Air,Fire Protection,Cranes,Equipment Selection,Specification,Data Sheets,TBE,Vendor Data Review

Refinery operation, technical service to hydrocracker/hydrogen/sulphur recovery unit, commissioning of hydrocracker/hydrogen/effluent treatment plant

16 years of Piping & Pipelines Projects execution experience in the Industries Refinery, Hydrocarbon and Oil & Gas (Project piping, pipelines, Tanks, structurals, equipments). Knowledge of ASME Sections, ANSI, API & DIN codes /Standards.

Plant operation in methanol plant, hydrodesulphurization, reformer, compressor, turbine, pumps, exchangers, distillation, tankform.

Civil engineer with 14 years experince (12 in saudi arabia). Skills include estimation, quantity take off, quotation requests, negotiations with suppliers, preparation of technical submittals, work progress reports, co-ordinations etc

Welder ***16 Years Experience***

About 9 yrs experience in the Feasibility Design, EIA Study, Detail Design and Tendering and awarding of Contract and construction supervision and quality control in hydropower projects

Pipeline Integrity Engineer with Metallurgical & Material Engineering background, extensive experiences in the oil/gas both Offshore and Onshore (and swamp) pipelines.

Business Development/Sales Professional

FEA ENGINEER-ANSYS,HYPERMESH,ABAQUS

Journeyman Electronics Technician,Seismic,Telecommunications,Copper Cable Splicing

Masters in Electrical Engineering. Four year experienced. Skills: MATLAB, PLC Programming, Simulation,HSPICE,MULTISIM, Assembly Language, AutoCAD, Visual Basic, C/C++, Operating Systems

Coordinating the efforts of the technical staff assigned to the project, planning, assigning, reviewing, evaluating and training staff in work procedures;

Sr. Structural Engineer-Ports, Marine & Offshore 8 years experienced, with knowledge of SACS, StaadPro, SAP

Bachelor of Science Degree, with eleven years experience in gold & copper exploration. Good knowledge of Mapinfo, core logging skills and mapping techniques. Use of Excel spreasheets to enter engineering and geological core logging data. Skills in technical report writing and analysis.

Skills are; mechanic, HVAC, heavy equipment etc.

I have a bachelor's degree in Mining Engineering and have 11 years working experience in hard rock underground and open pit mines. I also have computer skills in mine planning and have supervised operations at a high level.

A materials management and control professional with extensive experience in all phases of material control in oil, gas and petro-chemical industry. Having broad knowledge in Materials Management Systems and can develop/design a Material Control Database System using Microsoft Access Programming. Re

Mechanical Engineer with over 16 years experience within the hydrocarbons onshore & offshore, mineral processing and manufacturing industries. Degree & trade qualified experience includes, engineering design, construction, shutdowns, commissioning and maintenance. Over 10 years of on-site constru

Land/Mining Surveyor

Chemist Search a job in regard to my education and experience I have been working in different petrochemical and petroleum industries for the last 10 years at various senior positions and two years of metal protection surface chemicals sales experience.

Diploma in Electrical Engineer. AutoCAD. Word. Excel. Windows.

Sr.Mechanical Engineer having 16 yrs of Experience in Petrochemical, Oil&Gas field

Experienced Engineer with 15+ years of on job experience. Conversant with ISO ,international standards and Oil and Gas industry requirements. Can lead a team of inspectors .Has worked in Saudi Arabia, Yemen, UAE and Kazakhstan. Largest contract Value 1.3 Billion USD.

Objective: computer application in mineral processing or engineer in mineral processing

Professional Profile Programme/project manager, confident, progressive and motivated. My background consists of consultancy and client side work, with programme/project management.

Being a petroleum engineer and having many years of experiences on middle eastern countries ( OMAN,UNITED ARAB EMIRATES, QATAR, IRAN...) could merit for any advertised jobs.

I am a hardcore professional with a Mechanical Engineer and more than 15 years multifaceted exposure in the Oil & Gas, petrochemical field. I was working with Brunei shell Petroleum for SAP implementation, and Petronas Gas Bhd, Malaysia, as a Maintenance Planning Executive in abroad.

13 Years international experience with major oil companies and service organizations. Currently responsible for Russian Exploration and development for a European Independent Oil Co. Also responsible for feasibility and application of new technologies within the company worldwide.

OBJECTIVE My goal is use my chemical and process engineering knowledge in a position as a Process Engineer or simulation engineer in the Refining Industry. Also I would be interested in using my knowledge in Logistics in any Industry

First Prev 101 102 103 104 [ 105 ] 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out