Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #88524 next resume »»
CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
* Simulation and process modelling of oil / gas unit operations with PRO-II, HYSYS, and ASPEN PLUS with intention of the plant optimization
* Modelling and optimizing of atmospheric and vacuum distillation towers
* Operating experience of atmospheric and vacuum crude oil distillation units and technical support of the operation to improve units performance and reliability
* Process data analysis for troubleshooting of the operation problems
* Knowledgeable about natural gas treatment plant including glycol dehydration and amine sweetening units as well as natural gas pipeline and compressor stations
* Experienced with combustion system and process fired heaters
* Thermal design and rating of heat transfer equipment and optimizing the design performance of heat exchangers using HEXTRAN, HTFS and HTRI
* Supporting HAZOP / Operability studies to improve performance in health, safety and environmental protection
* Support activities on pre-commissioning, commissioning and plant performance testing
* Major process equipment sizing calculations for pumps, compressors, heat exchangers, separators, drum, columns, tanks, etc. pipe hydraulic calculation (including two phase flow), pressure safety valve sizing
* Hydraulic calculation for oil / gas pipeline using PIPEPHASE and PIPESYS
* Flare network design using FLARENET
* Developing heat and material balance, Process Flow Diagrams (PFD) and Piping & Instrument Diagrams (P&ID)
* Process design and engineering of oil and gas projects at various levels i.e. Design Basis Memorandum, Front End Engineering Design, Detailed Engineering Design
* Extensive familiarity with refinery units such as Hydrotreating, Hydrocacking, Naphtha Platforming (CCR), Hydrogen production, LPG recovery / treating, sour water stripping units and utilities
* Feasibility study for the refinery projects

OBJECTIVE:
------------
Senior process engineer
------------

WORK EXPERIENCE:
------------
WorleyParsons Calgary – Calgary, AB, Canada
Process Engineer Nov. 2006 – May 2009
* Nexen Inc. – Long Lake SAGD oil production field support. Responsible for review & modification of existing sampling system and adding new sample cooler, conducting study on feasibility of increasing water-glycol circulating pump capacity to resolve operation problem and other such issues raised by Plant Operations based on MOC's (Management of Change) scope of work.
* Suncor Energy Inc. – Firebag Hot Bitumen Pipeline Project - Pipeline pumps station and facilities (EDS and detailed engineering design stages). Performed simulations to predict fluid properties, developed PFD / P&ID, performed process calculations, equipment sizing, pump calculation, prepared equipment and instrument data sheets, prepared engineering design specification (EDS) report, reviewed and checked vendor documents and supported HAZOP / Operability studies.
National Iranian Oil Engineering & Construction Company – Tehran, Iran
Senior Process Engineer May 1992 – Aug. 2006
* Tehran Oil Refinery, Iran – Worked in atmospheric and vacuum distillation of crude oil and LPG recovery and separation units in the petroleum refinery. Distillation optimization for producing more distillate (using PRO-II and HYSYS). Assigned to different refinery process units such as Hydrocarcker, Reformer and Hydrogen Production units. Participated in the refinery regular overhaul programs.
* Turkmenbashi Refinery, Turkmenistan – Gasoline Production Unit. Performed detailed engineering design including developing PFD / P&ID, preparing equipment design specifications, hydraulic calculation, material requisition (MRQ & MRP) for chemicals / catalysts for UOP Licensed Units consisting of the Gas Concentration Unit, the Gasoline Merox Unit (24,000 bbl/day), the LPG Merox Unit (12,000 bbl/day) and the Amine Gas Treating & Regeneration Unit. Also supervised equipment installation and participated in pre-commissioning and commissioning activities during the construction phase of the plant.
* Korpeje Gas Pipeline / Facilities, Turkmenistan – Natural gas dehydration facilities and pipeline project. Performed pipeline hydraulic calculation (using PIPEPHASE), process simulations of gas condensate recovery / stabilization unit (using PRO-II), generated heat and material balances, developed PFD / P&ID and prepared equipment design specifications in the DBM, FEED and detailed engineering design phases of 8 MMSCMD (280 MMSCFD) sweet natural gas dehydration plant and gas condensate (NGL) recovery / stabilization unit together with the associated gas pipeline (140 km NPS 40 inches).
* Abadan Refinery, Iran – Refinery Expansion Project. Prepared tender document packages, evaluated proposals including Licensor selection, attended kick off meeting, PFD / P&ID review meetings and reviewed process design specification for following refinery units: kerosene/gasoil Hydrodesulfurisation, C5 / C6 Hydrotreater & Isomerization, hydrogen production, amine treating, nitrogen production, sulfur recovery plant, sour water stripper units.
* Arak Oil Refinery, Iran – 150,000 BPSD grassroots oil refinery construction project. Reviewed of the designed documents of the process equipment in the refinery units including crude oil distillations, Visbreaker, LPG recovery, Unifiner / CCR Platformer, Hydrocracker unit, hydrogen PSA production and amine gas treating, and participated in process and mechanical inspection of the major equipment such as pumps, fired heaters, heat exchangers, towers, vessels / drum, etc.
* Bandar Abbas Refinery, Iran – Refinery Expansion Project. Participated in feasibility study for refinery expansion and upgrading to process ultra heavy crude oil blended with Iranian heavy crude oil as a feedstock, debottlenecking existing capacity (230,000 BPSD), selecting optimum refining scheme, producing cleaner products to meet new environmental regulations, increasing refinery conversion and improving production efficiency.

EDUCATION & CERTIFICATION:
------------
* B.Sc., Chemical Engineering, Faculty of Engineering - Tehran University, Tehran, Iran, 1985- Sep. 1989
* Member of the Association of Professional Engineers, Geologists, and Geophysicists of Alberta (APEGGA)

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1051 to 1100 of 15497)Go to Search Parameters...
Brief Description
B.SC. ENGINEERING, PROACTIVE TECHNIQUE,ISO9001:2000 & HSE
17 years in procurement, project management, planning
Ihave varied U/G experience as a Supervisor and have honed my communicative skills, with a constant focus on regulatory compliance.
Drilling fluid superintendent / supervisor ( mud, cement, waste management)
Project management executive with experience in project management, coordination, planning, monitoring and controlling projects.
I am a knowledgeable Mechanical/Piping Designer with Project Engineering experience, capable of increasing degrees of responsibility.
Over 14 years of professional experience, including 8 years working for a multinational Fast Moving Consumer Good companies, Involved in various assignments, focusing on HR Recruitment Strategy, Competency Assessment and Performance Management Systems Design, Organization Design and Development, and
electrical/mechanical superintendent/ project manager
Civil Engineer with 17 years experience
I have twenty five years of piping design, 10 years of project leading with in the piping group, shop fabrication & field construction c/w PDS & AutoPlant soft wear experience. I have US work experience & posses a valid Social Security card.
Offering more than Fourteen years of Experience in Marine, Offshore, Oil & Gas Industry with a wide variety of projects involved in Electrical & Instrumentation Disciplines. Acquire extensive knowledge in a broad range of Computer programs & other Various E & I Engineering Field
Chief Finance Officer of Group having One Islamic Investment Bank in Dubai and Asset Mangement Company in Malaysai,
Expert in managing conglomerates and applying strategic planning and control instruments
Instrument / Controlsystems Engineer
Driller / Tool Pusher (Onshore / Offshore)
Geologist geophysicist interpretation
EPCM Project Contracts Interface (Client-EPCM-Subcontractors)
Emergency Management professional with 28+ years of combined experience; managing teams, providing technical expertise and leadership in programs, projects, operations, and training; in both Fire Services, Training Academy’s and the Petrochemical Industry
Electrical Maintenance Engineer With over 30 years of experience in providing services and solutions to electrical maintenance and Training & development etcin the engineering and Oil & gas industry.
To obtain a challenging position with an engineering firm where I can use my relevant skills and experienced as Interface Design Coordinator / AutoCAD Supervisor and be a contributing member in the growth of the company. Willing to work as a key player in challenges where I can put my committed atti
My professional education has been in the field of Ag. Economics, commodities trading and along with strategic planning and leadership. Abilities that applied in my past in more than 16 years of executive management in agribusiness management and high governmental level positions,
I am capable of achieving organisation¡¦s objectives and organic growth through effective contributions. I have over 13 years of experience in the areas of Health, Safety & Environment Management
Safety Manager/Director - risk management
Maintenance Supervisor/Security, Maintenance Supervisor/ I&C, Project Manager
Civil Engineer. Formwork Specialist. Experience: 14 years. Mounting, Scaffolding, Precast Concrete.
20 years fire fighting experience.Now working in ADNOC Off Shore facility
hv construction,power plant construction,locomotive maintenance,supervisor,general electrical maintenence
Overseas experience in Mineing and Oiland Gas in Maintenance Management
Having 23 years of sound experience in piping and equipment design for Onshore / Offshore Oil and Gas, Petrochemical and Chemical Industries.
24 Years of experience in Piping/ Pipeline Design Engineering for Oil & Gas of Onshore and Offshore facilities.
Experienced land professional with a strong background in all phases of petroleum land management. Proven expertise in a variety of situations, as well as proven leadership skills as demonstrated in Land Manager positions with two companies and as an independent lease broker utilizing the services
Structure designer is make development basic design from engineer to make engineering drawing with make details, sections, connection types and discuss with other department like piping, civil, mechanical etc to make problem solve in engineering design or site.
Fujitsu LV-III Installer, OSP Field Engineer, Structure Cable Lead Installer, Fiber and Copper Splicer, Network Tech, Antenna Tech
Mechanical engineer for heat exchanger, package, boiler, fired heater, fabrication, HTRI, compress
25 years Petrochemical / Oil Process Operations Including 10+ years in Supervisory / Man Management positions Commissioning and Start-up Assignments (Overseas)
Self-motivated, results-oriented professional with extensive international experience with multinational firms and government-owned facilities in the construction, shutdown, and refurbishing of oil, gas, petrochemical, and power facilities and plants.
Team Leader Const/Maint. Oil/Gas Ind.Experienced in planning/execution of projects ,procedures , method statements , permit systems , progress rep. , reviewing change orders, QA/QC and HSE standards. Running multicultural workforces coordinating disciplines and subcontactors.
PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Engineering. Special knowledge in Surface Technologies, especially Thermal Spraying. a German citizen with Permanent Resident Status in Canada.
SENIOR PROFESSIONAL ENGINEER OF 30 YEARS DIVERSE EXPERIENCE
Over 20 years of extensive experience as an international consultant. Provider of structural software for the analysis and design of concrete & steel according to ACI, AISC & API codes of practice. Expert in; structural systems & forensic investigation. Professional in; STAAD III & MS office Suite.
Participates in inspection of Gupco’s R/Sh facilities to provide adequate advise on corrosion matters, especially MIC problems
Petroleum Geologist, having more than 22 years of experience. Presently working with Oil And Natural Gas Corporation Limited, India at Mumbai. Well versed in both development and exploration of hydrocarbon.
Wellsite geologist , Operation geologist ,The work is entirely based on a rig where the work activities during exploration and appraisal drilling projects are typically undertaken
Base metal and Gold extractive metallurgist, General Mill foreman. Non metallic project manager. Training and multilingual communication abilities.
Graduated in B.Eng civil 1976 and Post grad Hydraulic in 1982, total 28 years experience in civil, infra such as steel, timber, road, car park structures and sewer and pipe laying as well as tunnels and pipe jacking works.
Over 14 years E & P and Service Industry technical experience with proven records of project deliverables. strong technical background as a Geoscientist, i.e.; Production and Development Geology, 3D reservoir modelling, Integrated Field Development study & Field Reviews.
Diploma in Nature Conservation ( 5 years); Certificate in Environmental Biology (1year); atriculation Certificate (with exemption)
More than fifteen years Experience, working with consulting engineering companies in Iran and Canada, with different assignments in variety of projects including EPC, R&D, master planning and feasibility studies
Free! Experienced Heavy Civil & Design Build Construction Project Manager with additional experience with Project Controls/Scheduling/Claims Resolution Management.
I am a professional process engineer with over 15 years experience
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   [ 22 ]   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Goto Advanced Search...
Keywords: (e.g. mining engineer)Find results with:
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com