Resume - Automotive Painter

Misco Jobs

Resume #88541

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS

Certified ASE and PPG Technician in Automotive Painting and Refinishing with over 20 years experience.
Extensive knowledge of sanding, blocking, masking, paint mixing and automotive painting techniques.
Ability to work under pressure, meet deadlines, and accept new challenges.
Self-motivated, organized, and works well with minimal supervision required. Five years experience in a manufacturing warehouse and operating a forklift.

SPECIAL SKILLS

Certified Automotive Service Excellence Technician (ASE Certified)
Certified Paint Performance Guarantee (PPG Certified)

KEY ACHIEVEMENTS

Consistently exceeded quality and production standards.
Excellent attendance and punctuation record.

WORK HISTORY

Houston Distributing Services (HDC)- February 2005 – November 2009
Auto Painter/Helper – Mask and sand vehicles, prime and block bodywork, mix paint, and painting and buffing vehicles.Experience in working at a manufacturing warehouse and operating a forklift.
Assisting Supervisor over 6 people

ABC AUTO & BODY - June 2005 thru Present
Auto Painter – Tape or mask vehicles, prime and block bodywork, mix paints, painting and buffing vehicles, order supplies, and maintaining a clean shop.

STEWART AND STEVENSON – June 2004 thru July 2004
Painter /Blaster – Steel blast armor cabs with steel grit, blow out the left over grit and clean the cab to get ready for painting.

STERLING McCALL TOYOTA – 2001 thru 2004
Head Auto Painter – Primary job was painting/clearing the vehicles, color matching, mixing of paint, and ordering all supplies. Maintaining a crew of Helpers, Sanders, Prepping Men, and Buffers.

CARNEY'S CORVETTE – 1999 thru 2001
Auto Painter – Mask, sand vehicles, prime and block bodywork, mix paint, and painting/clearing vehicles.

ANAHEIM INDUSTRIES INC. – 1993 thru 1998
Auto Painter/Helper – Mask and sand vehicles, prime and block bodywork, mix paint, and painting and buffing vehicles. Five years experience in working at a manufacturing warehouse and operating a forklift.

Pyramid – 1981 thru 1993
Structural Fitter - Read blue prints to fabricate steel columns and rafters.

Marathon Metallic – 1979 thru 1981
Structural Fitter – Read blue prints to fabricate steel columns and rafters.

AMERICAN STEEL - 1977 thru 1979
Structural Fitter- Read blue prints to fabricate steel columns and rafters

EDUCATION
Graduate – Jefferson Davis High School, Houston, Texas – 1977
Houston Community College – Automotive Technology Center, Houston, Texas – 1984
PPG Certified Refinish Technician, Houston, Texas- 1999
Automotive Service Excellence Technician (ASE Certified) Houston, Texas - 2003

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2251 to 2300 of 15341)

Go to Search Parameters...

Brief Description

Instrument and Control Systems Engineer, WorleyParsons, Qatar

Field operations and producing technology, Workover & Completion, Production Optimization, Water Flooding, Well Test Design and Interpretation, Artifial Lift Design and montoring, Well Planning and Development drilling, Strong software skills

Experience in all aspects of modern orogenic lode gold style deposit exploration work. Have supervisory skills, experienced database administrator, • Proficient in MS Access dB, •MICROMINE Geological Software,

Field Supervisor and Office Coordinator with extensive experience in customer service, people and time management and problem solving. Safety conscious and deligent about having safety as top priority on jobsites. Very positive and energetic attitude combined with quick learning ability

At present as working as a Toxicologist in Military Hospital drugs testing lab & clinical research under Ministry of Interior, Govt. of Saudi Arabia since 21st March 2004 to till date.

Experienced in Rotating Equipment overhauling and Static Equipment Maintenance from July 1998.

I have experience as a tool pusher and driller.

Free! Drilling Superintendent: 21 years’ of progressive experience in land drilling, including extensive experience in international environments, with comprehensive management background.

8 year experience in materials, corrosion, thermal insulation and piping for the oil and gas industry, including FPSO’s, Offshore production platforms, Offshore offloading buoys, Onshore plants, LNG terminals.

Maintenance oriented. Highly skilled and experienced.

I have been in the excavation industry for over 30 years having owned my own Excavation company for 16 of those years. I can operate a variety of equipment as seen on my resume

Rig manager(workover) - Sudan, Field supervisor(workover and completion rigs) - Egypt, Company representative - Libya/Canada. Project supervisor - Libya

i can manage site maintanace,fabrication and erraction

A result-oriented professional with nearly 14 years experience in Piping Design, Operation & Maintenance, Quality Assurance and Relationship Management. Handled a varie

Skillful, energetic and dedicated Project Controls Planner/Cost Analyst with extensive international Oil & Gas experience. Seven plus years interfacing with engineering, procurement, manufacturing, finance and accounting plus one year marine construction; installation and vessel operations with emp

I am a Chemical Engineer and have a master's in Heavy Crude Oil Refining. i also have a master's in Work Health and Safety. I have extensive experience in Oil Refineries in the Construction and Maintenance of new plants. i am willing to travel.

Im a fitter with alot of skills, like winder fitter, hydraulic fitter, maintenance, heavy duty fitter. Hydraulic and pneumatic experience, reading off hydraulic drawing. do designing, planning and building of new power packs for raise bores aswell.

27 years underground -production&movecrew&dead work,good worker&very dependable.

scaffolding supervisor / co-ordinator /instructor

Extensive work in Gas, Liquid and C02 Measurement

Automotive Painter

32 years process maintenance, budgeting, maintenance planning, condition monitoring. set up PM programs. scheduling. manage personnel. training. project management. Reliabilty Centered Maintenance.liner configuration.

SEASONED MAINTENANCE AND PROJECT MGMT. PROFESSIONAL

SR PROCESS CONTROLLOR,LAB INCHARGE,FIRE ASSAY TECHNICIAN,PRECIOUS PLANT SHIFT INCHARGE,SUPERVISOR

32 years experiance in the mining industry. I worked as a Shaft Timberman(17years),Shift Boss on Developing, Tramming& Construction (9years), Diamond Drill Supervisor/Foreman/Site Manager(4years)

Senior Drilling Engineer

8 years' experience in petroleum refining; process modeling; profitability studies; production planning; LP (linear programming); PIMS; HYSYS; Petro-SIM; CrudeManager; Spyro; ProcessBook; DataLink; MS Office; M.Sc. in chemical engineering (specialized in petroleum processing)

I am a petroleum engr, US citizen, with 20+ years experience as Drilling Supervisor, on & offshore, in drlg, completion, workover, testing, in the US and many other countries. Familiar with deviated drlg, horizontal, drlg underbalance, H2S, wkg in remote locs. Fluent English & Spanish.

Workover & completion supervisor

Extended experience in Supply Chain Management process and strategies development, Service integration packages, negotiations, tender exercises, purchasing, logistics, Inventory control and Warehousing.Dynamism, efficiency, objectivity and perseverance

Over 20 years of experience in Plant Operations or Maintenance.

PCS Manager - Cost and Planner Engineer

I have 9 years experience as Material -Procurement/ Expediting/Materials co-coordinator, the assignment which included handling of all aspects of Oil and Gas Industry related SAP-SCM/ Oracle 11i5.9 based EBS, EAM,CPL modules.

I am a Geologic Engineer with more than 9 years of experience. I have worked for multiple mining companies in Peru. Basically I have worked for open pit operations, but I also have experience with underground mines. I am experienced whit mine geology (ore control), porphyries of Cu-Mo, epithermal.

Instrumentation Engineer with 12 years experience of Instrumentation & control scope of project engineering and plant maintenance in Oil & gas,petrochemical and chemical industry.

I am civil engineer having 12 years experience.i have passed post graduate diploma in this field.

Gas turbine component Design, GD&T, Performance, CFD, CFX, Fluent, LES.

A Senior Waste management/Environmental Protection Technician with a wide range of experience Documentation/Safety Permit issuance, Isolations Procedures, Operations & Maintenance of industries, Waste management plants. Able to work on own initiative and as part of a team. Proven leadership skills

NEBOSH, INDUSTRIAL SAFETY DIPLOMA

- Experience in managing a team at the work place.

Career ObjectiveTo be the best performer for the group, I am serving. Working for its progress and achieve its goals by Caring ,Sharing and Growing within all team members..

Experience in General Administration / Human Resource Management •Document Management / EDMS on Construction Project Management and Integrated Facility Management. •Experience in Contract and Cost Administration / Property Management •Includes diverse supervisory skills in planning and organiz

A Design Specialist responsible for managing the setup, standards, training, design-team leadership, and coordination of Intelligent Data-centric CAD work within multiple offices and Engineering disciplines, both domestic and international. P&IDs, Piping, Smartplant, SPPID

Chemical engineer having more than 12 yrs. experience in petochemical in operation and design consultancy.Also having experience in precommissioning and commissionig of petrochemical plants.

Directional Drilling Supervisor with 18 years in Oil & Gas Industry

Experienced Safety Manager. Experience at Head/Regional./Site Office level. Experienced in setting up sites and on-going training of personnel. Writing Site Specific Management Plans and up-grading of overall management systems a speciality.

Ph.D. in Geophysics (2005), C++, Fortran developer, geomodeller, processor. 5 years of industrial experience, 10 years in academy - geophysics and applied mathematics.

Facilities management, HR Management, Administration,- Mechanical Engineer, NEBOSH

Chemist/Metallurgist - Graduated from the western Australian School of Mines; Australian resident status; Experience in characterization and processing of rocks, minerals and coals; strong background in analytical chemistry.

15 years real estate experience with 7 years oil and gas experience.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 [ 46 ] 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out