Resume - Industrial Engineer with experience as maintenance instrument technician and pla...

Misco Jobs

Resume #9924

CONTACT INFORMATION:
View contact information...

OBJETIVE
Obtain a position as an Instrument Engineer within a large dynamic company, to develop my skills as engineer and apply my knowledge and experience background, contributing to increase the company profits by increasing the instrument systems availability, reliability and safety.

SUMMARY OF EXPERIENCE
Profile Industrial Engineer with experience as maintenance instrument technician and plant engineer in process plants. Higher Knowledge in Instrumentation and Control, such as transmitters, field sensors, analyzers, solid handling instrumentation, control valves, special application devices, Bently Nevada systems, DCS and field controllers, located in Boilers, Sulfur Plants, Electricity Generation Plants, Gas, Water Treatment, Delayed Coker, Coke Handling, Naphtha Hydrotreaters, Amine Regeneration, Raw Water Units. Maintenance experience with Triconex, Honeywell DCS and ICS Triplex. Experience in the analysis, application and installation of Critical Systems including Safety Instrumented Systems (SIS) per ANSI/ISA 84.01, IEC 61508 and IEC 61511, Burner Management Systems (BMS), Emergency Shutdown (ESD) and Fire & Gas Solutions. Ability to use Instruments and control engineering software. Excellent computer skills.

Experienced, results oriented professional, who is a conscientious problem-solver, attentive to detail and produces quality work. Strengths include: development and implementation of automation and maintenance programs, commissioning & installation of new technology equipment, and evaluation of instrumentation for compliance with regulatory guidelines including Custody Transfer Applications. Other areas include training, documentation review, procedure and design verification/validation, writing/revising procedures, and Honeywell TDC-3000 System hardware troubleshooting.

RECENT EMPLOYMENT SYNOPSIS
Company: Exxonmobil De Venezuela S.A
Operadora Cerro Negro Upgrader - Jose - Venezuela
Instrument Engineer.

Beginning: Jan04, 2001 until: Present time.
Responsible for design, basic and detail engineering for changes and projects, technician training, installation support, standards development, equipment specifications, new instrument systems start-up such as compressor, turbines, motors and other mayor plant equipment, field instruments troubleshooting development, checking and application of instrument system start-up procedures, on-line troubleshooting and on-line preventive maintenance procedures, including safety and control systems for compressors, blowers, motors, coke handling systems and other Upgrader plants, checking and upgrading maintenance procedures. Generate field reports and review operation feedback on instrument performance, provide staff leadership and technical support, and assist the design engineering department in the practical application of engineering concepts and safety standards. Responsible for Custody Transfer Installations.

Company: Petroleos De Venezuela S.A (PDVSA)
Amuay - Cardon Refinery - Paraguana - Venezuela
Instrument Tech & Auxiliary Supervisor
Beginning: March06, 1991 until: Dec23, 2000

Responsible for Honeywell DCS System (TDC-2000 and 3000) in hydrotreater, electricity generator, sulfur and hydrogen plant control rooms, preventive and corrective maintenance to the Honeywell networks Hiway Data, LCN and UCN and HPM's, APM's, PM's, GUS, US,s, provide support for compressors emergency systems, responsible for technical safety and/or training issues related to continuous improvement of instrumentation and electrical controls for existing process control systems ( DCS & PLC), technical Assistance in PLC's Allen Bradley, Modicon, Honeywell, Triconex, ICS Triplex and Machine Monitoring System (Bently Nevada, Woodward, Cooper Energy). Developed training programs to improve performance of operations, provide research and development assistance to Project Engineers for new product design, manufacturing, and implementation. Maintain equipment technical documentation and develop safety procedures for new equipment. Maintain records to comply with Venezuelan and customer specifications regarding ISO 9000.

PARTICIPATION IN PROJECTS
Honeywell Distributed Control System TDC-3000 Installation in Amuay Refinery:
* Electric Plant Block 11 Control Room Reinstrumentation Project
* Atmospheric Distillation Control Room Reinstrumentation Project
* HDS Expansion Project

PLC Regent + Plus System (Triplex) Installation in Amuay Refinery:
* HDAY-2 Unit Reinstrumentation Project.
* Crude Heavy Project Unit PS/PV-5

Instrument Assistance for specs, test and installation details in Operadora Cerro Negro:
* Sulfur Plant Tail Gas O2 Analyzer Installation Project
* D-3104 Sludge Handling Project
* Sulfur Preacondicioner Project
* Natural Gas New Line Project
* Natural Gas Metering Station (NGMS) Project
* LPG Optimization Project
* Amine Gas Knockout Drum Project
* New SWS Feed Tank Project
* Instrument Air Dryers Expansion Project
* Diluent Upgrader System and TK-5309 Operational Flexibility Project

COMPUTER SKILLS
General Software: MS-DOS, Windows, Microsoft Office, Windows Projects, Primavera Project Planner, Máximo System, Crystal Report, AutoCAD, Matlab, CC, Fisher First Vue, Pegasys.
Dedicated Software: Allen Bradley RS-Logix5, Regent + Plus (Triplex) Winterpret, FT-50 Cooper CBOS100, Honeywell Logic Manager 630-25, Fisher-Rosemount Field Vue, ProComm Plus (communication Interface with RIS System), Hart Protocol, Honeywell and Rosemount Hand Helds.

SKILLS/QUALIFICATIONS
Field Instrument Knowledge
Distributed Control System TDC-3000 hardware specialist.
Great capacity for troubleshooting
Making decision capacity
Leadership. Team Worker. Friendly. Adaptability to any work environment
Organized and Responsible

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6101 to 6150 of 15478)

Go to Search Parameters...

Brief Description

Civil engineer

Fluent in French, Arabic and meduim in english

I have 8 years experience in process piping design in hydrocarbon service, including layout and production piping.

Architectural draughtsman, my experance is 8 yeairs completed and hands-on training with Architectural, Mechanical, Civil and Structural DraftingƒnExperienced with AutoCAD 2004 - 2009,Proficient with Windows: MS Word, MS Excel, MS Works, MS Outlook, MSƒnPowerPoint,

I am proficient in installation, troubleshooting and repair of electrical eqiupment.I can read prints and wiring diagrams. I am skilled in the use of electrical test equipment and electrical tools of the trade. I have WY, and MT master electrical license.

Experienced Mech. CAD designer utilizing ProE, Solidworks,Autocad and assoc. PDM packages to work on electromechanical projects for companies in the medical, power generation, textile manufacturing, communication, consumer product, industrial and aerospace industries.

Experienced Plant Manager: Was born into the Aggregate Business and have worked for more than 20 years in a large variety of positions within the aggregate industry with a record of successful cost reduction and increased production in operations.

Ten (10) years of accumulated experience in construction engineering, project planning using Primavera P3 ver. 3.1 for more than six (6) years, and project management. Last seven (9) years with Saudi Arabian Oil Company (Saudi Aramco), Saudi Electricity Co. - Eastern Region Branch (SEC-ERB) and Saud

Sixteen years experience in inspection such as Piping and Structure Inspector, Pipeline Inspector, Civil & Track Work Inspector, NDT Technician Operator, Machinery Fitter for petrochemical projects, power plant, oil and gas projects, LRT-PUTRA project

Internationally experienced and trained professional in Instrumentation and Control Systems. Experienced in the design, control philosophy, MMI/HMI generation, implementation, start-up, commissioning, and operation of DCS, SCADA, and PLC.

chemical engineer

Technically accomplished & competent professional with over 9+ years’ rich experience on Refinery Inspection department Activities, starting from Refinery construction stage to pre-commissioning and Normal operation. Currently working as Assistant Manager (Inspection) with NRL

Tender Preparation & Evaluation, Raising RFP’s, Preparing prequalification document including involvement in preparation of execution strategy, Defining scope of work, preparation of Commercial clarification, Raising commercial deviations etc. Project Monitoring: Continuous monitoring of Projects

Having total 11 years experience out of which 10 years in Oil & Gas and Shipbuilding Industry as an Cost Estimator, Cost Control Engineer, Tender Coordinator and HSEQA Adviser in the leading FPSO/FSO Company, Shipbuilding/ship repair and conversion yard.

I am a Slickline Operator with over 20 years of experience in Wireline/Slickline Operations. I am an holder of a diploma in Mechanical Engineering.

A Senior Project Engineer with a wide range of experience in Construction and Maintenance. Able to work on own initiative and as a part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve the planned objectives.

20+ years in drilling and completions including under balanced side trac re-entry and frac-pack sand control operations. Have worked off-shore Greece, desert locations Libya, Algeria, Saudi, and Russia

25 years Experience Materials & Logistics, Base Manager, UK, West Africa, Middle East

Phd in Geology, presently working as a hydrogeologist in central groundwater dept. india for the last 8 years

Chemical Engineer. Main experience as chemical treatment and corrosion engineer in Oil&Gas facilities (gas, steam and water injection plants, tank farms). Engineering and field experience. Oilfield chemicals selection and testing. Process optimization. Control and Instrumentation experience.

Wellsite geologist, wireline corelation, mapping, pressure detection, hands on well control advisor, well design, rheology and hydraulics solutions.

Mechanical fitter, heavy engineering, worked all over africa, currently in mali, knowledge of hydraulics and pneumatics, work on winders mills etc laser alignment

Sound understanding/ implementing of HSE Management System.

Presently working offshore China coast for the last 11 years. We have drilled & completed over 48 wells. Side tracked over half. We have drilled 8 ERD wells the furtherest is 9238m (with a horizontal displacement of 8063m June 1997) This is China record for "Deepest Measured Depth".

Contracts, Services Manager, Wellhead Maintenace, Integrity Engineer, Senior Well Engineer

Phisicyst with Power Electronics specialization

I have been a cementing supervisor for Haliburton and Schlumgerger for over 20 years, I have worked mostly offshore, hpht, deep water, I have some land expierence, I am currently working in Yemen, I have a very good knowledge of all facets of cementing, tools, chemicals and equipment etc

B.E. Mechanical Engineer, Middle Management Maintenance Executive. Demonstrated willingness and ability to quickly acquire new expertise, solving problems related with Rotating Equipment reliability and performance. Looking for challenging opportunity and career advancement.

Senior Piping Designer CADD

Mechanical / Piping Engineer

Diploma civil engineer from Mumbai(1st class with distinction)have 23 years of actual field experience of executing various types of civil works in & around Mumbai & pune.I hereby attach my C.V.along with this letter for your consideration & evalution.

Im graduated of bachelor of science in civil engineering, I have 14 years experience in Drafting/Design for structural steel, FPSO pressure vessel and piping layout thru P&ID. I have background in qaulity inspection for dimensional and visual, also Im NDT-LEVEL II Inspector (DPT).

Instrumentation Engineer With 10 Years Experience In Managing Engineering,Re-vamping,Installation, Commissioning And Maintenance Of HONEYWELL DCS/SCADA Systems

Years of exp. in the Western U.S. and South America. Exploration trough production with the big five surface and underground operations. Understands South America.

Project Control Manager/ Lead Planning Engineer - Oil & Gas.

QA/QC/NDT inspector, trainer, or manager - structural steel, power piping, transmission pipelines and nuclear - AWS D1.1 QC-1 CWI, and level II in RT, UT, MT and PT per SNT-TC-1A - Computer literate -

With 20 years experience in fire, rescue and emergency response, I hold instructor qualification in the areas of high angle, aviation, confined space, trench rescue and well as fire fighting. I am at present completing a post graduate diploma in WH&S run by CQ Uni, Australia.

I worked in automation and process consulting companies for six years.

* Chemical Engineer with 14 years experience in Process, Production, Commissioning, Technical Support & Service, Product Development, Quality Control, Project Management, SHE (Safety, Health & Environment), Logistics, Sales & Marketing and Production Planning area.

A confident organised individual who is methodical in his approach to completing tasks, Can either work as a self – reliant individual or as part of a team.

Mine/Mill Maintenance Supervisor OBJECTIVE: A position in the mining industry, where ever I can be useful as a Mine/Mill production / process manager, Supervisor, Maintenance Technician

Industrial Engineer with experience as maintenance instrument technician and plant engineer in process plants. Higher Knowledge in Instrumentation and Control, such as transmitters, field sensors, analyzers, solid handling instrumentation, control valves, special application devices

I have spent 23 years in the extractive and minerals processing industries.

API-510, API-570, API-653, AWS-CWI 25years international experience QA/QC Supervisor ,Superintendent, Coordinator

University degree in Logistic's & Economics, 13 years hands on Middle East experience in all Procurement matters of small to huge EPC (design & built) Construction projects in public, defense & petrochemical works in both managerial & operational positions.

Crane operator/ outside machinist

My areas of expertise includes commissioning, start up, shutdown and operation of gas plant, refinery and oil production units.

I am Mechanical Engineer having 14 years of working experience in Maintenance of Petrochemical and Fertilizers Plants. Good knowledge of SAP, MS OFFICE.

I am an Electrical Engineer from Colorado School of Mines. I have worked for two major oil companies. I have worked on several areas of energy industry as an Electrical Engineer.

Supervisor - SAFE Underground Mining/Training - Production/Development and Construction. Atlas-Copco, Boart-Longyear, Wagner, Caterpillar, etc. 20+ years in Underground Gold, Silver, Lead and Zinc.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 [ 123 ] 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out