Misco Jobs
|
Go to Employer's Center »»
|
«« previous job
Senior Loss Prevention Engineer
next job »»
Posted:
6 May 2008
Location:
Ras Laffan, Qatar
Senior Loss Prevention Engineer -5.2.1 Ras Laffan, Qatar
Job Reference no.17419
Contract period3 years +extensions as per project requirements
Closing date15-05-2008
Job descriptionMAJOR RESPONSIBILITIES
1.Provides, with full responsibility and accountability, loss prevention design and technical services that are in compliance with the latest codes, standards and safety regulations, for all stages of project life cycle. Exercise full technical responsibility of the loss prevention engineering design for all assigned projects.
2.Develops cost effective, safe and fit for purpose loss prevention engineering design solutions to suit Corporate requirements. Ensure full life cycle costs are taken into consideration during decision making process for design.
3.Co-ordinates, interface and provide inputs with other parties, activities for all assigned projects, on technical matters, projects schedule and implementation strategy in various phases of lifecycle i.e. Study, SOW preparation, Pre-award evaluations, Engineering, Procurement, Commissioning and Start-up phases.
4.Carries out Firewater Demand Estimation and prepare Project Specific Fire & Safety Philosophy to conceptual design for assigned projects if necessary.
5.Carries out in-house HAZOP studies where necessary to progress a project within defined schedule limitations.
6.Prepares in-house loss prevention engineering documents for FEED and detailed designs for fast track critical projects where necessary to meet operational defined milestones and deadlines.
7.Prepares project specific loss prevention data sheets for equipment where necessary to progress a project or to meet operational defined milestones and deadlines.
8.Participates in Value Engineering and Risk Assessment activities. Ensures that end user requirements are identified and met in a safe and reliable, but cost effective manner.
9.Ensures all applicable environmental and Safety standards and policies, within Loss Prevention design engineering are fully incorporated on all assigned projects.
10.Provides technical assessment and recommendation of tenderers, as member of Tender evaluation committee. Review all tender documents including contractors Loss Prevention Engineer CV’s company profile, HSE policies & HSEM procedures, method statement etc.
11.Reviews new loss prevention technologies and assesses suitability for use within QP facilities. Makes presentations and makes technical submissions to senior management as required.
12.Provides structured training and development of Qatari loss prevention Engineers.
13.Provides technical engineering input for Contractor Claims and Variations for the assigned projects.
14.Deputise for Lead Engineer as required.
15.Preparation of Functional requirements for Active and Passive fire protection systems, Fire & gas Detection Systems, ESD systems, General Alarm Systems and Escape & Evacuation Systems.
16.Provides Loss Prevention input to statement of Requirement’s (SOR), and prepare Loss Prevention part of scope of Work (SOW) for the following types of Contracts:
a.Engineering Consultancy Services (ECS)
b.Front End Engineering Design (FEED)
c.Engineering Procurement, Installation and Construction (EPIC)
d.Procurement, Installation and Construction (PIC)
17.Assists the Maintenance Departments by preparing technical assessment and remediation reports.
18.Acts as Engineering Coordinator to coordinate within technical services department for preparation of In-House FEED, Detailed Design and Scope of work for the assigned projects.
19.Provides technical and design services to Operations Departments as requested through the Miscellaneous Work Request System.
20.Carries of Single Discipline (SDC) and Inter Disciplinary (IDC) Checks for the assigned projects.
21.Participates in design review meetings with Consultants and Contractors to provide guidance and direction in all loss prevention engineering matters, thus ensuring full compliance with Company requirements.
22.Reviews and approves Contractor’s loss prevention engineering deliverables (Drawings, Calculations, Specifications, method statements, Operating manual etc) for ECS, FEED and EPIC Contracts to ensure compliance with latest Codes Standards, and Company requirements.
23.Participates in HAZOP and HAZID teams/studies.
24.Participates in, and review Quantitative Risk Assessment (QRA) reports and implements the recommendations as applicable in projects.
25.Reviews and approves HAZOP Chairman CV & HAZOPS Procedures.
26.Estimates man-hour requirements for preparation and review of Loss Prevention Engineering deliverable for assigned projects.
27.Reviews existing procedures, technical standards, and specifications and recommend amendments.
28.Identify to the Lead Engineer any additional resources required to complete assigned projects.
29.Attends and witness FATs and SATs.
30.Reviews the pre-commissioning and commissioning documents submitted by contractor for the assigned projects.
31.Supports Operations in resolving technical issues that requires Loss prevention design related inputs to ensure safe and smooth operation of the offshore oil and gas production facilities.
32.Provides technical support during construction and commissioning and start-up activities to ensure all work is carried out in a safe manner, and in accordance with the approved designs.
33.Initiates Vendor Review for a project and assessment of Vendors and their products in updating the department’s Preferred Vendor List (PVL).
34.Reviews and verify Waiver Request and Technical Queries received from Contractor/Vendor.
35.Ensures that works carried out are within the framework of Corporation’s and Department’s approved Quality Management System to meet the Quality Objectives.
36.Directly responsible for ensuring that the loss prevention engineering deliverables of Contractors and Consultants is in compliance with Company’s requirements. Assesses and approves/recommends suitability of Loss Prevention engineering submissions by Contractors and Consultants.
37.Single point technical responsibility and accountability for all assigned projects, within loss prevention engineering area of authority.
38.Able to operate within broad guidelines set by established Company procedures, and guided by Engineering Codes and standards.
39.Responsible and accountable for technical integrity and safety of designs.
40.Requires minimal guidance and instructions.
41.Assess and recommend technical suitability of Tenderers to perform the work, within Loss Prevention engineering areas of responsibility.
42.Has a responsibility for ensuring Company obtains value for money and compliance with budget requirements.
43.Assess suitability of requested deviations from Company and international Standards and Codes of Practice.
44.Implementation of projects entails expenditure of hundred of millions of QR, generating large multiples in cash of revenue to the Company.
45.Areas of responsibility and magnitude of projects handled have a direct effect on timely revenue generation for Company. Impact of decisions made during project design stages may not necessarily be known until after project completion in the field, and capital expenditure spent. By this time remedial actions, if necessary, may not be possible or may be prohibitively expensive.
46.Considering magnitude of the number and size of projects undertaken, it is essential that every action is undertaken to minimize the Company’s exposure to risk, and maximize revenue generation.
PRIMARY DUTIES AND RESPONSIBILITIES
Responsible and accountable for Loss Prevention Design of facilities for assigned projects from definition through execution phases. Execute corporate plans to sustain and enhance hydrocarbon production, as directed, through implementation of fit-for-purpose, safe and environmentally sound Loss Prevention engineering while assuming full responsibility and accountability for technical integrity of designs. Approves designs and verifies that plants and facilities are built to the approved designs. Provide an internal service to the project(s), carry out in-house Conceptual Studies, FEED and Detailed Designs. Contributes to the update of Loss Prevention related Codes, Standards, Specifications and Philosophies.
RequirementsEXPERIENCE AND QUALIFICATIONS
•Bachelor degree in Chemical/Mechanical Engineering
•15 years or more of post graduate experience in oil & gas industry. Of these, there should be minimum 5 years of experience in design and engineering of offshore oil and gas installations.
•Chartered Engineer status or equivalent.
•Proficiency in use of Loss Prevention engineering software like PHA-Works for HAZOPs, PHAST, FRED, SAFETI & CIRRUS
•Supervisory skills
•Ability to work effectively in a multidisciplinary team environment.
•Ability to plan and organize workload comprising multiple projects, located in company’s different offshore operational areas.
•Proven technical competency in Loss Prevention engineering and ability to carry out Project Safety Reviews, HAZOP Sessions, safe and fit-for-purpose designs.
•Presentation skills.
•Thorough knowledge of industry/international standards and ability to interrupt the same for specific applications.
•Working Knowledge of Contracts
•Experience in construction, commissioning and start-up activities.
Contact Information:
Click here to view contact information...
«« previous job
next job »»
Search Results (jobs 2651 to 2700 of 3513)
Go to Search Parameters...
Posted
Title
Location
6 May 2008
DRILLING ENGINEER ADVISOR – Oil & Gas Exploration & Production
Houston, TX, USA
6 May 2008
Facilities Engineer
Lafayette, LA, USA
6 May 2008
Rotating Equipment Specialist
Kuwait
6 May 2008
Senior Loss Prevention Engineer
Ras Laffan, Qatar
6 May 2008
Senior Instrument Engineer
Ras Laffan, Qatar
6 May 2008
Planning Specialist
Kuwait
6 May 2008
Senior Project Engineer (Power Gen etc.,)
Eskene West, Kazakhstan
6 May 2008
Lead Engineer - Subsea Oil and Gas
Saint John, NL, Canada
6 May 2008
Drilling Fluids Technicians & Consultants
Canada
5 May 2008
Sr. PE Consultant
Saudi Arabia
5 May 2008
Exploration System Specialist
Saudi Arabia
5 May 2008
Quantitative Reservoir Quality Prediction Researcher
Saudi Arabia
5 May 2008
Drilling Foreman - Gas Drilling and Workover
Saudi Arabia
5 May 2008
Senior Project Engineer
Perth, Western Australia (for residents)
5 May 2008
Risk Engineer
Perth, Western Australia (for residents)
5 May 2008
Lead Process Engineer
Perth, Western Australia (for residents)
5 May 2008
Senior Process Engineer
Perth, Western Australia (for residents)
5 May 2008
Lead Structural Engineer
Perth, Western Australia (for residents)
5 May 2008
Project Managers / Engineers (Oil/Gas exp.)
Bakersfield, California, USA
5 May 2008
Project Controls Engineer (MS Project or Primavera Exp.)
Bakersfield, California, USA
5 May 2008
STRUCTURAL DESIGNER (Oil & Gas experiece preferred: AutoCAD exp. required)
Bakersfield, California, USA
5 May 2008
Structural Engineers (Oil & Gas industry)
Bakersfield, California, USA
5 May 2008
Electrical Designers (AutoCAD exp.)
Bakersfield, California, USA
5 May 2008
Piping Designers and Drafters (AutoCAD exp.)
Bakersfield, CA, Richmond, CA, USA
5 May 2008
Process / Project Engineers (Oil & Gas)
Bakersfield, CA, USA
5 May 2008
Senior Instrument Engineer
Kazakhstan
5 May 2008
Senior Deepwater Drilling Engineers
Malaysia
5 May 2008
Reservoir Engineer
DALLAS, TX, USA
5 May 2008
Senior Oil Consultant
Houston, TX, USA
5 May 2008
Project Engineers - oil refining industry
Houston, TX, USA
5 May 2008
Geoscience Technician
Houston, Texas, USA
5 May 2008
Geologist
west Houston, Texas, USA
5 May 2008
DCS/ Electrical Engineer
Saint John, NL, Canada
5 May 2008
Senior Geophysicists
Calgary, Alberta, Canada
5 May 2008
Production Engineers
Calgary, Alberta, Canada
5 May 2008
Drilling Engineers
Calgary, Alberta, Canada
5 May 2008
Reservoir Engineers
Calgary, Alberta, Canada
5 May 2008
GENERAL MAINTENANCE TECHNICIAN (GMT)
Prudhoe Bay, Alaska, USA
3 May 2008
Free!
Consultant - Oil/Refining/Market
Houston, TX, USA
3 May 2008
Free!
Process Engineer - Process/Refinery/Energy
Houston, TX, USA
3 May 2008
Free!
Consultant - Energy/Refinery/Petrochemical
Houston, TX, USA
2 May 2008
Free!
Reservoir Engineer
Saudi Arabia
2 May 2008
Free!
Reservoir Engineer
Saudi Arabia
2 May 2008
Free!
Reservoir Engineer
Saudi Arabia
2 May 2008
Free!
Reservoir Engineer
Saudi Arabia
2 May 2008
Free!
Reservoir Engineer
Saudi Arabia
2 May 2008
Free!
Reservoir Engineer
Saudi Arabia
2 May 2008
Free!
Reservoir Engineer
Saudi Arabia
2 May 2008
Free!
Reservoir Engineer
Saudi Arabia
2 May 2008
Free!
Reservoir Engineer
Saudi Arabia
First
Prev
51
52
53
[ 54 ]
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
Last
Seach Parameters
To select/deselect multiply items hold down CTRL or CMD button.
Show Jobs Posted:
Any day
Today
Last 2 days
Last 3 days
Last 4 days
Last 5 days
Last 6 days
Last 7 days
Last 14 days
Last 30 days
Last 60 days
Last 90 days
Categories:
Industries:
Any category
Administration
Management
Engineering/Technicians
Operations
Trades/Skilled
Other
Any industry
Mining
Petroleum/Oil/Gas
Construction
Environmental
Regions:
Education Level:
Any region
Africa
Asia
South East Asia
Europe
Russia/CIS
Middle East
North America
Central America
South America
Australia/NZ/PNG
International
Any
No Education
High School
Some College
2-yr Degree
4-yr Degree
Masters Degree
PhD/MD/Doctorate
Experience Level:
Any
No Experience
1 year
2 years
3 years
4 years
5 years
6 years
7 years
8 years
9 years
10 years
11 years
12 years
13 years
14 years
15 years
16 years
17 years
18 years
19 years
20+ years
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post resume with this search parameters...
Frequenly asked questions about job search...
Warrior for your career
»
Job Seekers Home
»
Feedback
»
Help
»
Search Jobs
»
Post Resumes
»
Edit/Delete Resumes
»
Get Jobs By Email
»
Tell A Friend
»
Useful Links
»
Register Now
»
My Account
»
Log In
»
Log Out
©1999-2008 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com