Misco Jobs

MAINTENANCE ENGINEER-ELECTRICAL & INSTRUMENT (Offshore)

Posted: 12 Nov 2007
Apply Deadline: 25 Nov 2008
Location: Qatar
QATARGAS

We are looking for a PRODUCTION AND MAINTENANCE STAFF

Qatargas Operating Company has exciting opportunities available for qualified professionals to join our company in the development of the vast North Field in Qatar. Qatargas currently has under development over $20 billion worth of major projects, including the construction of our new Liquefied Natural Gas trains for the production and export of LNG to every corner of the globe.

♦ OPERATIONS DEPARTMENT

• UTILITIES

SHIFT SUPERVISORS
Graduate/ Diploma holder with a minimum 10 years experience in utilities plant process with at least 4 years in a supervisory role. Reports directly to the Head of Process. Understands company health, safety and environmental policy & how its related to his job also able for comprehensive report writing.

PANEL OPERATOR
Graduate/ Diploma with min 6 years experience in Utilities as panel will familiar with high pressure steam. Power generation (STS, GTS), waste water treatment, flare system N2 and Air system.

SENIOR OPERATOR
Diploma/ NCTVT with a formal plant training and able to lead his team on routine day to day process activities in Utilities plant familiar with high pressure steam. Power generation (STS, GTS), waste water treatment, flare system N2 and Air system. Minimum 10 years Experience and out of which at least 4 years as Senior Operator.

ROVER OPERATOR
Diploma/ NCTVT with a formal plant training with minimum 5 years experience in utilities plant familiar with high pressure steam. Power generation (STS, GTS), waste water treatment, flare system N2 and Air system in the same position. Thorough knowledge of Process is must.

• INLET RECEIVING

SHIFT SUPERVISORS
Graduate/ Diploma holder with a minimum 10 years experience in inlet receiving plant process with at least 4 years in a supervisory role. Reports directly to the Head of Process. Understands company health, safety and environmental policy & how its related to his job also able for comprehensive report writing.

PANEL OPERATOR
Graduate/ Diploma with min 6 years experience in receiving panel will familiar with slug catcher, Condensate stabilizer, piping operation, LPG treating and sour water injection

SENIOR OPERATOR
Diploma/ NCTVT with a formal plant training and able to lead his team on routine day to day process activities in receiving plant will familiar with slug catcher, Condensate stabilizer, piping operation, LPG treating and sour water injection. Minimum 10 years Experience and out of which at least 4 years as Senior Operator.

• PROCESS

SHIFT SUPERVISORS
Graduate/ Diploma holder with a minimum 8 years experience in Oil, Gas, and LNG plant process with at least 4 years in a supervisory role. Reports directly to the Head of Process. Understands company health, safety and environmental policy & how its related to his job also able for comprehensive report writing.

PANEL OPERATOR
Graduate/ Diploma with min 6 years experience in LNG/ LPG Refinery or Gas Treating plant with through knowledge of process.

SENIOR OPERATORS
Diploma/ NCTVT with a formal plant training and able to lead his team on routine day to day process activities in LNG/ LPG Refinery or Gas Treating plant. Minimum 10 years Experience and out of which at lease 4 years as Senior Operator.

ROVER OPERATORS
Diploma/ NCTVT with a formal plant training with minimum 5 years experience in LNG Plant, LPG Refinery or Gas Treating plant in the same position. Thorough knowledge of Process is must.

• SULFUR RECOVERY UNITS

SHIFT SUPERVISORS
Must have a minimum of 8 years experience within sulfur recovery plants. Familiar with CLAUS, superclaus and TGT processes. This position is a senior supervisory level and you will be responsible for a team of operators reporting directly to Head of operation.

PANEL OPERATORS
Must have 5 years minimum experience in operating panel for Sulfur recovery units in LNG, LPG, Refinery or Gas treating plants Familiar with CLAUS, superclaus and TGT processes.

SENIOR OPERATORS
Must have 5 years minimum experience in operating Sulfur recovery units in LNG, LPG, Refinery or Gas treating plants. Familiar with CLAUS, superclaus and TGT processes

ROVER OPERATORS
Must have 5 years minimum experience in operating of Sulfur recovery units in LNG, LPG, Refinery or Gas treating plants. Familiar with CLAUS, superclaus and TGT processes.

• CSP

SENIOR OPERATOR/ ROVER OPERATOR
Must have minimum 5 years of liquid and solid sulfur handling, granulation and ship loading experience, able to handle utility packages like electric boilers, boiler feed water and instrument air.

• CLP

SHIFT SUPERVISOR
Must have min. 10 years of LNG storage and ship loading experience, able to lead a team of 5, reporting to head of section.

PANEL OPERATOR
Must have min. 8 years of LNG storage and ship loading experience, report writing, and reporting to shift supervisor.

SENIOR OPERATOR/ ROVER OPERATOR
Must have min. 5 years of LNG storage and ship loading experience, familiar with loading arms connection.

• LIQUID BERTH

SHIFT SUPERVISOR
Must have 10 years of HC storage and ship loading experience, knowledge of floating and conical roof tanks behavior while filling emptying, ship loading safety and documentation procedures, reporting to section head.

PANEL OPERATOR
Must have min. 8 years of HC storage and ship loading experience, floating and conical roof tanks behavior while filling and emptying, loading arms connecting/ disconnecting, ship loading safety awareness, reporting to loading supervisor.

SENIOR OPERATOR/ ROVER OPERATOR
Must have 5 years of HC storage and ship loading experience with floating and conical roof tanks, able to connect/ disconnect ship loading arms, reporting to panel operator.

• REFINERY

SHIFT SUPERVISOR
Candidate should have minimum 9 years refinery expertise, experience in fractionation, Hydrogen, Naphtha stabilization, Naphtha Hydro-treating and Kerosene hydro-treating units, and minimum 2 years in charge as shift supervisor.

PANEL OPERATOR
Candidate should have minimum 7 years refinery expertise, experience in fractionation and hydro-treating units, and minimum 2 years in charge as panel operator.

SENIOR OPERATOR
Candidate should have minimum 5 years expertise, and minimum two years in charge as Senior Operator.

ROVER OPERATOR
Candidate should have minimum 3 years expertise in any of the refinery process units, such as fractionation unit, any of hydro-treating units, hydrogen unit or naphtha stabilization and LPG units.

• TANK FARM

PANEL OPERATOR
Able to understand the operating philosophy, principles and process parameters and control complex control systems. He should know the cost & effect of PESD, ESD and F&G systems. Able to lead the shift crew with clear instruction and follow-up outside operators action from DCS. Experience with floating roof tanks, conical roof tanks operations and tanks/ product behaviors with climatic changes. Able to record handling and report writing.

SENIOR OPERATOR
Able to co-ordinate with panel operator for the day to day operating activities. Identify potential rotating equipment failure before occurrence (bearing noise, vibration, rubbing noise, cavitations). Experience with floating roof tanks, conical roof tanks operations and tanks/ product behaviors with climatic changes. Able to produce handover report, and records handling.

ROVER OPERATOR
Follows-up instruction from senior or panel operators. Able to understand the safe operating principles of rotating and process equipment. Able to operate with minimum supervision in terms of equipment line up for the intended operations. Experience with floating roof tanks, conical roof tanks operations and tanks/ product behaviors with climatic changes. Able to read P&ID/ PFD’s

• OFFSHORE OPERATIONS DEPARTMENT (ONSHORE BASED POSITIONS)

MAINTENANCE ENGINEER-ELECTRICAL & INSTRUMENT (Offshore)
Provides support for the Mechanical, Electrical & Instrument maintenance of field equipment. Contributes to the overall planning & execution of major shutdowns. Provide technical advice to Mechanical, Electrical & Instrument Supervisors in consultation with the On-shore Electrical and Instrument Engineers on a regular basis and leads/ participate in troubleshooting complex and recurring equipment faults. Initiates service requests for all contract services and administration of the contracts. Act as an onshore focal point for all matters related to Mechanical/ Electrical/ Instrumentation repair, modifications, material, Co-ordinate actions with Engineering, SE&Q, Supply, Inspection, other maintenance disciplines and outside agencies. Bachelors degree in Mechanical, Electrical or Instrumentation Engineering together with 8 years maintenance experience in the oil and gas or similar industry and offshore maintenance is desirable. Good written and spoken English.

MAINTENANCE PLANNER (Offshore)
Coordinates and participates in maintenance work planning for all regular and scheduled preventive maintenance, defect repair and modification activities of offshore facilities. Programs the Preventive Maintenance Plan for offshore facilities in all respective sections of mechanical, electrical or instrumentation. Processes daily work orders issued for various maintenance sections. Updates equipment histories with details of work carried out, equipment condition, component replacement as advised or noted after completion of the work. Maintain repairs and faults failures records. Completion of Secondary (12 years) education, followed by finalized training in an engineering discipline equivalent to 2 years full time. 8 years maintenance experience in an oil or gas process plant, including site activities and planning experience. Good written and spoken English. Computer literacy, including use of maintenance planning, and management systems.

PANEL OPERATOR (Offshore)
Position incumbent will have frontline responsibility for monitoring and controlling operations of remote offshore wellheads through the Distributed Control System located in the control room. He’ll work on a shift basis at the onshore plant control room and will be required to have deep technical knowledge of the equipment, an analytical approach and the ability to identify and act on real and potential problems. Incumbent will participate during the phases of commissioning, start-up and operations of these remote wellheads and thus would be expected to travel to construction sites and offshore fields. High School graduate and successful completion of the National Certificate (NC). A minimum of 8 years operator experience in the oil and gas sector, preferably offshore, exclusive of any study time taken to upgrade qualifications.

♦ MAINTENANCE DEPARTMENT

MECHANICAL ENGINEER
Plans and supervises the maintenance, repair and installation of a wide range of rotating and static equipment in the Utilities, Inlet Receiving Facilities, Storage and Loading areas. Provides supervision and technical direction over preventive, predictive and breakdown maintenance requirements. Participates in the preparation of modifications/ projects and shutdown requirements. BSc. in Mechanical Engineering or equivalent. 8 years maintenance experience in an oil or gas processing plant including at least 5 years supervisory experience. Good written and spoken English.

SENIOR ANALYZER TECHNICIAN
Completion of secondary education (12 years) followed by 3 years formal trade training on instrument/ analyzer/ control system engineering crafts plus a minimum of 5 years direct instrument and trouble shooting experiences on analyzers in the oil and gas sector or chemical process industries.

ELECTRICAL ENGINEER
Plans and supervises the maintenance, repair, installation, overhaul, testing and calibration of a wide range of electrical equipment, power distribution systems and other equipment in the offsites areas. Provides supervision and technical direction over preventative, predictive and breakdown maintenance requirements. Participates in the preparation of modifications/projects and shutdown requirements. BSc. in Electrical Engineering or equivalent together with 8 years maintenance experience in an oil or gas processing plant including at least 5 years supervisory experience. Good written and spoken English.

SENIOR INSTRUMENT TECHNICIAN
Completion of secondary education (12 years) followed by 3 years formal Trade Training in Instrument or Control Systems Engineering Crafts plus a minimum of 5 years direct Instrument and Trouble shooting maintenance experience in the Oil and Gas sector or Chemical Process Industries.

CONTROL SYSTEMS ENGINEER
Supervises, plans, provides technical support and is responsible for the safe operation and functionality of Integrated Control Systems (ICS) deployed at the Qatargas Onshore and Offshore facilities. Actively participates in the Factory Acceptance Tests (FAT) and Site Acceptance Test (SAT) of new control systems, to ensure that the new technology is transferred and accepted into Qatargas. Bachelors degree in Instrumentation or Control Systems, Computer Sciences or Software Engineering together with 6 years experience in instrumentation design, maintenance or ideally within an oil or gas processing environment, together with knowledge and/or experience in Foxboro IA system, PLC, TMR and ESD systems. Good written and spoken English.

INSTRUMENT ENGINEER
Supervises, plans and coordinates activities for the maintenance, safe operation and functionality of all Instruments, regulatory control, process safety and emergency shutdown systems associated with process operations in all Plant areas. Provides supervision and technical direction over predictive and breakdown maintenance. BSc. in Instrument or Control System Engineering or equivalent together with 8 years maintenance experience in a modern oil or gas processing plant which uses DCS/TMR/PLC technology, including at least 5 years supervisory experience. Very good written and spoken English.

SENIOR ELECTRICAL TECHNICIAN
Completion of secondary education (12 years) followed by 3 years formal Trade Training in Electrical Engineering craft plus a minimum of 5 years of direct Electrical Maintenance and trouble shooting experience in the Oil and Gas sector or Chemical Process industries. Knowledge of PLCs power generation and control equipment.

Qatargas offers a secure expatriate lifestyle in an international community with educational, medical and recreational facilities, competitive tax-free salaries, a full range of benefits, including family or bachelor housing, furnishings and generous paid annual vacation back to your country of origin.

Contact Information:
Click here to view contact information...

«« previous job

next job »»

Search Results (jobs 151 to 201 of 201)

Go to Search Parameters...

Posted	Title	Location
18 Jun 2008	Fluid Hauler (2) Class 1	Grande Prairie, AB, Canada
18 Jun 2008	Directional Drillers	Calgary, AB, Canada
18 Jun 2008	Measurement While Drilling Operators	Calgary, AB, Canada
18 Jun 2008	Project Manager + many other positions!!	Brisbane
16 Jun 2008	Oil and Gas Professionals	Perth
12 Jun 2008	Exploration/Development Geologist-Coalbed Methane & Shale Gas Operations	Houston, TX, USA
10 Jun 2008	Free! For New Steel Mill - Construction Project Manager, Site Engieers, Superintendents - many positions	Yemen
11 Jun 2008	Plant Operator -MVC Facility	Mukhaizna, Oman
9 Jun 2008	Free! Quality Management Systems Auditor/Consultant	Doha, Qatar
13 May 2008	Free! Logistics Personnel - Expat Positions	Kazakhstan
12 Nov 2007	Security Lead	Kaji (South Sumatra), Indonesia
12 Nov 2007	MAINTENANCE ENGINEER-ELECTRICAL & INSTRUMENT (Offshore)	Qatar
8 Nov 2007	ELECTRICAL/ INSTRUMENTATION CAD Drafter	South Jakarta, Indonesia
8 Nov 2007	Process Drafter	Indonesia
8 Nov 2007	NIGHT TOOL PUSHER	Indonesia
8 Nov 2007	Senior Internal Auditor/ Internal Auditor	Qatar
5 Nov 2007	Principal GIS Analyst	Perth, WA, Australia
5 Nov 2007	2D Piping Drafter	Adelaide, SA, Australia
5 Nov 2007	Mechanical Design Drafters	Adelaide, SA, Australia
2 Nov 2007	Directional drilling operator - oil and gas drilling (Directional Bore Operator/Locator - Utilities)	York Region, Ontario, Canada
2 Nov 2007	NIGHT TOOL PUSHER	Indonesia
31 Oct 2007	Procurement Assistant	Indonesia
31 Oct 2007	Process Drafter	Indonesia
30 Oct 2007	Toolpushers	Brisbane, QLD, Australia
30 Oct 2007	Load Handler	Jakarta, Indonesia
30 Oct 2007	Banksman & Riggers	Jakarta, Indonesia
30 Oct 2007	Signalman	Jakarta, Indonesia
29 Oct 2007	Crane Maintenance Mechanic	Jakarta, Indonesia
28 Oct 2007	IT PROGRAMMER	Indonesia
28 Oct 2007	ELECTRICAL/ INSTRUMENTATION CAD Drafter	Indonesia
27 Oct 2007	Riggers / Load Handler	Indonesia
27 Oct 2007	Signalman / Banksman	Indonesia
27 Oct 2007	Crane Maintenance Mechanic	Indonesia
27 Oct 2007	Rotating Equipment Chief	Indonesia
27 Oct 2007	Static Equipment Chief	Indonesia
27 Oct 2007	Mobile Equipment Chief	Indonesia
27 Oct 2007	Field Maintenance Squad Chief	Indonesia
25 Oct 2007	GIS Specialist – MapInfo, ArcGIS/ArcView	Melbourne Metro, VIC, Australia
20 Oct 2007	LOGISTIC – EXPEDITOR	Jakarta, Indonesia
20 Oct 2007	MECHANICAL DRAFTER	Jakarta, Indonesia
19 Oct 2007	Mechanical Drafter	Adelaide, SA, Australia
17 Oct 2007	Toolpusher (AUS)	Brisbane, QLD, Australia
16 Oct 2007	Field Trainer – Electrical	Indonesia
15 Oct 2007	Shift Chemist	Sydney CBD, Australia
15 Oct 2007	Directional Steerers	Brisbane CBD, Australia
15 Oct 2007	Toolpusher (AUS)	Brisbane CBD, Australia
13 Oct 2007	Shift Chemist	Sydney, NSW, Australia
12 Oct 2007	Shift Chemist	Sydney CBD, Australia
10 Oct 2007	Experienced - CSG Driller	Brisbane, QLD, Australia
8 Oct 2007	Mechanical Drafter	Adelaide, SA, Australia
3 Oct 2007	Procurement/ Logistic Staff	Indonesia

1 2 3 [ 4 ]

Seach Parameters

To select/deselect multiply items hold down CTRL or CMD button.
Show Jobs Posted:

Categories:		Industries:

Regions:		Education Level:

		Experience Level:

Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post resume with this search parameters...
Frequenly asked questions about job search...

Warrior for your career

» Job Seekers Home

» Feedback

» Help

» Search Jobs

» Post Resumes

» Edit/Delete Resumes

» My Account

» Log In

» Log Out